I'm seeking an experienced network engineer to work on my Cisco 2951 STC telephone line VoIP configuration.
I'm seeking an experienced network engineer who has 7+ years of experience and to overhaul our company's Local Area Network (LAN), Wide Area Network (WAN), and Wireless Network. - **Goals and Challenges:** The primary goals are to improve network speed and performance, enhance network security, and expand network coverage. The optimal candidate will have proven experience in achieving these outcomes in past projects. - **Devices Connectivity:** On average, there will be less than 50 devices connected to the networks. Therefore, understanding how to optimize a network for this amount of devices will be crucial. - **Skills & Experience:** A strong background in LAN, WAN, and Wireless Network setup and management is essential. Network security expertise and experi...
I'm seeking an experienced network engineer to work on my Cisco 2951 STC telephone line VoIP configuration. Key Responsibilities: - You will primarily be responsible for setting up VoIP using the SIP protocol. - Integration of specific SIP trunking features is also needed, in line with our operational requirements. Skills and Experience: - Prior experience in configuring Cisco 2951 STC or similar products is a must. - Extensive knowledge and experience with VoIP technology and SIP protocol. - Familiarity with SIP trunking features would be considered a great advantage. Candidates who can deliver the project promptly and professionally will be highly preferred. This project offers the opportunity to showcase your abilities in a complex, highly technical environment.
I am looking for a proficient mechanical engineer to create simplified drawings of auto parts for me. - Main Task: Your primary role would be to create low complexity mechanical drawings with a focus on different auto parts designs. - Ideal Skills: Proficiency in mechanical design, a great grasp of auto parts and experience in creating simple to intermediate complexity engineering drawings are crucial for this job. Your bid should be based on your experience and knowledge of creating simplified auto parts mechanical drawings.
...cannot meet the contemporary one-size-fits-all ASHRAE Standard 90. 1 to qualify for a deduction. This alternative requires a “qualified retrofit plan” that specifies the modifications to the building that are expected to reduce the building’s EUI by 25% or more. No governmental agency is required to review or approve the plan, although it must be certified by a professional (e.g., an architect or engineer). Under this alternative, the Sec. 179D deduction is not taken when the property is placed in service but rather is allowed one year later, upon the completion of a “final certification” establishing the percentage reduction in annual energy usage.” Key responsibilities: - Review the proposed plans to determine if they would meet reduce the...
Hello freelancers, I am looking for a designer to create a logo for my Charleston-based tour company that specializes in Civil War history. The name if the company is Big Red Tours. The logo should of course include the company name and have the Civil War Battle Flag - (South Carolina Flag Red). This client specializes in historic walking and private tours in Charleston, SC. The walking tours are downtown Charleston, SC and the private tours are at the Citadel. Top Desired Elements: • The design should feature the battle flag of the Civil War era, particularly the iconic red South Carolina flag. • The logo needs to incorporate some elements of Charleston's skyline or a historic landmark, both of which are significant to our brand and contribute to...
...Analyze: Implement processes for capturing screenshots of the GUI state, analyzing them for textual and visual cues to understand the interface layout and available actions. Contextual Understanding: Develop methods for the AI to process extracted text and metadata, along with the current context and end goal, formulating a comprehensive understanding and strategic action plan. Action Generation: Engineer the AI to generate actionable code or commands that interact precisely with GUI elements identified during the analysis phase. Execution and Feedback Loop: Oversee the execution of actions via automation tools, ensuring the system dynamically adjusts based on GUI changes, thus creating an effective feedback loop for continuous improvement. What We're Seeking: An AI develop...
We're searching for a knowledgeable Embedded Systems engineer with an in-depth understanding of STM32 microcontrollers. Our project involves designing and implementing firmware for a new PCB. Key responsibilities: - Creating firmware to acquire readings from a temperature sensor and an oxygen sensor. - Converting the hexadecimal sensor readings into decimal for display purposes. - Enabling real-time data transmission of sensor readings. We need a expert who is proficient in STM32 microcontrollers and has a background in handling sensor data in real-time. You should have excellent skills in C/C++, as well as experience in coding for resource-limited platforms. Any previous experience with temperature and oxygen sensors would be a distinct advantage. Your challenge is to creat...
As a company that values effective and energy-efficient systems, we are lo...highlights structural details of the steam power generator. - Performing detailed CFM calculations to maximize turbine efficiency. Ideal freelancers would have: - Proficiency with CAD or other 3D software for presenting detailed generator structures. - A strong understanding of CFM calculations, specifically in terms of turbine efficiency for electricity generation. - A background in mechanical, civil, or electrical engineering to ground advice and recommendations. - It also wouldn't hurt if you're a critical thinker with the mindset for efficient and green energy. Please place your bid if our goals align and this sounds like something you could thrive in. Let's work together to create an...
I am seeking an experienced and competent furniture designer and engineer with whom we can collaborate with to assist us in the design and development of an extensive range of high-end, multifunctional furniture products. This project includes the design and engineering of various types of luxury beds, sofas, chairs, tables, dressers, cabinets and more. We deal in furniture of all types and styles; Italian, European, modern, contemporary, futuristic, and multifunction (everything furniture). The designer should incorporate very detailed features in each design such as ; material quality, comfort, solid structural build (inner/outer), ergonomics, convertibility, functionality (electric recline, components, wiring, mechanical/mechanism placement and operations...
I am looking for an experienced LED engineer who can create and manage a control system for a stage performance. I want to control more than 20 lighting fixtures that will enhance the overall visual experience of my performance. Your tasks will include: - Create a LED control system for stage performance - Manage a system with over 20 lights Ideally, you will have experience in: - LED control systems - Stage performance lighting - Managing large lighting systems
As we embark on designing a modern building, we're on the lookout for a skilled civil engineer to guide us through this key phase. With your expertise, our building will not only serve its purpose but stand as a representation of modern aesthetics. Detailed Assistance: • Bring your experience in modern building design and help elevate our project. Key Roles: • Analyzing project specifics for potential challenges. • Deliver innovative solutions for design obstacles. • Prepare distinctive conceptual designs visualizing the modern aesthetic. Ideal Skills and Experience: • In-depth knowledge of modern architecture. • Proven experience in civil engineering related to building design. • Strong ability for problem-solving and cr...
I'm seeking a skilled DevOps engineer experienced with containerization (Docker, Kubernetes), configuration management (Ansible, Puppet), and CI/CD tools (Jenkins, GitLab). Working within Linux (WHMCS) would be advantageous. Key understanding and experience with Linux server administration is also essential and will be highly regarded. The ideal candidate should have a deep understanding of these tools, proven experience in employing them, and the ability to communicate and collaborate seamlessly in a team environment. Roles and Responsibilities: Design, implement, and maintain infrastructure as code (IaC) Set up and manage CI/CD pipelines for automated software delivery Monitor system performance, availability, and security Manage containerization and orchestration with Docke...
I am looking for a qualified and experienced engineer to design a Double-layer PCB for signal processing operations. This board should be specifically designed using Altium Designer software. The design includes reverse engineering two components which are pre made and need to be implemented into the design. The design includes an Emg sensor, Emg data module, esp32 wroom 32, lipo battery and lipo battery charging module. Key project specifications include: - Design of a functional double-layer PCB - Focus on signal processing functions - Utilization of Altium Designer software Ideal candidates will have: - Extensive experience in PCB design - Specific knowledge and experience in double-layer PCBs - Proficiency in Altium Designer software - An understanding of signal processi...
More details: What specific temperature parameters do you want to simulate for the lithium-ion battery? Operating temperature range 25 C° - 45 C°, Thermal runaway temperature, Ambient temperature What are the desired simulation outputs for the lithium-ion battery temperature distribution? Temperature contours, Heat flow distribution, Time-dependent temperature variation What specific factors or conditions should be considered in the simulation of the lithium-ion battery temperature distribution? Battery charging/discharging rate 0,5C - 6C
Remote AutoCAD Engineer Wanted! Are you an AutoCAD wizard with a passion for precision and design? We're on the lookout for a talented and experienced AutoCAD Engineer to join our dynamic team on a full-time remote basis. Key Responsibilities: Create detailed 2D and 3D drawings using AutoCAD software. Collaborate with cross-functional teams to ensure accurate project specifications. Review and revise designs based on feedback and project requirements. Stay up-to-date with industry standards and best practices in AutoCAD. Requirements: Proven experience as an AutoCAD Engineer. Proficient in 2D and 3D modeling using AutoCAD software. Strong attention to detail and accuracy. Excellent communication and collaboration skills. Ability to work independently in a rem...
I need a DevOps engineer experienced with not only PHP version upgrades but someone equally proficient in maintaining Moodle functionality. Here's what the project entails: - Upgrading the PHP version from 7.0 to 7.4 on our Linux server. - Ensuring uninterrupted service of our Moodle application during the PHP upgrade. - Thorough testing post upgrade to confirm Moodle is performing optimally on PHP 7.4. Skills and Experience required: - Prior experience in Linux server management. - Proven expertise in managing PHP version upgrades. - Familiarity with the Moodle platform is crucial.
...Here's an insight into what the project entails: Software Functionality: * Enable document storage and retrieval with an easy interface. * The software must possess search and filter options for ease of accessing specific documents. * Implement user access control to maintain privacy and integrity of documents. Court Decision Support: * The software must be able to handle decisions for criminal, civil, and administrative cases. This means it will need the capability to process and store varying formats and types of data. Jurisdiction Capacity: * The software should gracefully handle decisions from multiple jurisdictions without compromising performance. Ideal Skills and Experience: * Previous experience in legal tech software development preferred. * Strong knowledge of ...
...Here's an insight into what the project entails: Software Functionality: * Enable document storage and retrieval with an easy interface. * The software must possess search and filter options for ease of accessing specific documents. * Implement user access control to maintain privacy and integrity of documents. Court Decision Support: * The software must be able to handle decisions for criminal, civil, and administrative cases. This means it will need the capability to process and store varying formats and types of data. Jurisdiction Capacity: * The software should gracefully handle decisions from multiple jurisdictions without compromising performance. Ideal Skills and Experience: * Previous experience in legal tech software development preferred. * Strong knowledge of ...
ML Engineer Responsibilities - Develop all data processing logic, combinations, and pathways for data preparation. - Implement ML models for clustering for outlier detection & removal. - Data ingestion pipeline requirements - Design & implementation of data science side of the entire Data Preprocessing Funnel Requirements - Proven experience as an ML Engineer or similar role. - Proficient in Python & related ML tools. - Familiar with ML algos. - Knowledge of statistical basis of ML models. - Ability to work independently and as part of a team. - Excellent communication and problem-solving skills. - Attention to detail and quality.
I'm seeking to hire an experienced civil engineer or a design consultant with expertise in stormwater designs. The project revolves around the right-sizing of stormwater tanks for my research campus Key tasks include: - Estimation of required stormwater tank capacity based on surface area - Appropriately designing the stormwater system to accommodate the campus specifics, considering environmental and safety factors. Ideal Skills: - Civil engineering or similar relevant experience - Knowledge in hydrology and stormwater management - Familiarity with laws and regulations related to stormwater management - Experience with research campuses or similar large-scale infrastructures - Strong understanding of CAD and other design software - professional in u...
I need a skilled mechanical design engineer, particularly proficient in SolidWorks, to design 3D printable ultrasonic sensor housings that will securely fit onto our bullbars/trays. This project is based off of 3D scans, which will be provided as STL files. Key aspects of this project include: - Designing housing to ensure a secure fit for the sensors - No specific aesthetic requirements; creativity is welcomed - The sensor housings are small in size This job could extend into other projects, following successful completion of this housing design. Knowledge and experience in 3D printing design, and mechanical engineering are essential for this role.
I am seeking an advanced-level legal assistant proficient in Arabic. This individual will be expected to perform high-quality legal research and draft legal documents pertaining to a civil case. Having a deep understanding and background in civil law is a prerequisite. Other tasks may arise as the project progresses. Ideal candidates will have vast knowledge and experience in the realm of civil law, be meticulous in their research, and possess excellent Arabic language skills.
I am in need of a highly skilled electronic engineer with a solid background in Raspberry Pi and Arduino who can aid in a vital Robotics project. Not your average project, you will be tasked with designing a robotic arm capable of multi-functional tasks. Skills/Experience: - Expert in Raspberry Pi and Arduino. - Proven experience in Robotics, particularly robotic arm design. - Understanding of object manipulation, precision tasks such as soldering/welding, and sensor interaction within the environment. The ideal freelancer for this project will have: - Experience in robotics, specifically designing robotic arms. - Prior projects involving object manipulation and sorting tasks alongside precision operations. - An exceptional understanding of developing an environment interactable r...
I'm looking for an experienced network engineer to configure a ZTE C320 with a MK 4011. The goal is to successfully deploy both GPON and FTTH networks. Key project objectives are as follows: - Network should support over 100 users - User ONU must authenticate with PPPoE Ideal candidates will have proven experience setting up ZTE GPON/FTTH networks of this size and familiarity with PPPoE authentication. Looking forward to seeing qualified bidders.
I am seeking a highly experienced and meticulous civil engineer to design a steel stilt foundation for a small coastal cottage. The foundation is specially designed to withstand a standard load bearing capacity on rocky soil. Key Responsibilities: - Carefully consider the cottage's coastal location and design the foundation to combat potential natural disasters. - Design the foundation to have a standard load bearing capacity, fit for a small cottage structure. - Consider the rocky soil condition when designing the structure's depth and installation process. Ideal Skills and Qualifications: - Civil or Structural Engineering degree or similar - Proven experience in designing steel stilt foundations - In-depth understanding of different soil types and their...
...electrical engineer based in California who would be responsible for ensuring code compliance on specific PV solar permit projects. PV plan sets are designed by electrical engineers (not Licensed in California) As an electrical engineer, you should be familiar with electrical codes and demonstrate excellent attention to detail. Key Responsibilities: - Maintain and verify electrical code compliance - Carry out relevant research and provide advice on PV plan set corrections. - The electrical engineering stamp to confirm that all of the work was prepared under his direct supervision, and “responsible charge”. This stamp is your formal declaration that the design documents conform to all requirements of the applicable standards and codes. Skills & Experience...
...currently in need of a specialist proficient in AutoCAD for a civil engineering CAD modeling project. Here are the core essentials of the project: - Task: The primary function to be undertaken pertains to the domain of CAD modeling. - Software Proficiency: A high-level proficiency in AutoCAD software is a requisite. - Industry Focus: This project revolves around the Civil Engineering sector. The ideal candidate for this project should have a strong background in Civil Engineering with a particular focus on AutoCAD. Your extensive understanding and practical excellence in this software will be crucial to efficiently create and manipulate our CAD models. It will be beneficial if you have proven experience in producing high-quality civil engineering CAD model...
I am looking for an expert in crane structural design to help with a project I have. The task involves analysis and design of a crane structure for heavy load capacity (10+ tons). Only for a sales project p...crane structure for heavy load capacity (10+ tons). Only for a sales project phase, that means a pre-dimensioning. Loads, location and other data are defined, the calculation has to be done. More specifically, I need assistance with: - Load capacity calculations - Stability analysis - Structural component design Know-How about norms: - EN 14439:2009 - EN 13001-2:2021 If you have a background in civil or mechanical engineering, especially with experience in cranes design, I would love to hear from you. Deep understanding of structural dynamics in heavy-equipment design is a m...
We are seeking a skilled Freelance Mechanical Designer with expertise in solar mount structures The Freelance Mechanical Designer will be responsible for: - the candidate will create detailed installation videos to guide customers through the mounting process effectively. (Recommend software SAP2000, 3D max, ETABS, or equivalent). - Structural Design: Design and engineer solar mounting structures, considering factors such as wind load, and structural integrity to ensure safe and reliable installations. - Stress Analysis: Perform comprehensive stress analysis using software tools such as Finite Element Analysis (FEA) to evaluate the structural performance of mounting systems under various loading conditions. - The result is to create an Installation Video demonstrating the step-...
As someone seeking to leverage the power of AI, I need a professional AI engineer with expertise in machine learning, natural language processing, and computer vision. Key Responsibilities: - Develop intelligent systems using machine learning techniques - Implement natural language processing for better interaction with software - Use computer vision to extract useful information from images or videos Required Skills: - Machine Learning - Natural Language Processing - Computer Vision There's no rush on this project, allowing ample time for quality work and fine-tuning. Please apply if you believe your skills, experience, and passion align with this project.
I am looking for an experienced deck engineer to develop a deck project made of pressure treated wood or metal beams and composite deck material. This deck should be designed in a light color theme. A significant feature of this deck is the incorporation of an inflatable hot tub, which may be placed anywhere on the deck. Principles of design, functionality, and safety should equally be considered. Ideal skills and Experience: - Experience in deck engineering - Previous experience in integrating hot tubs into deck designs - Strong sense of aesthetics and functionality - Attention to safety details Parameters: - Deck Material: Composite - Color Theme: Light colors - Specific Feature: Hot Tub Deck dimensions are: 55' long. One section is 14' wide for 19' The res...
My project will leverage AWS' EC2, S3, and Lambda services to build a robust DevOps architecture for a web application. The main goal is to create an environment that supports continuous integration and deployment, ensuring smooth, rapid, and reliable updates to the application. I'm seeking an experienced AWS DevOps engineer who has: - Proficiency with AWS services, especially EC2, S3, and Lambda - Demonstrated success in setting up continuous integration and deployment environments - Expertise in web application development and management.
...a QA Engineer with extensive experience in JMeter to complete the load/performance test. Please note that this is not a simple JMeter project and requires a thorough understanding of the tool. If you are not an expert in using JMeter, please do not apply, as you will not be able to do the job. The platform to be tested consists of the following components: - Web App (our main app, accessible only through user login) - Public API - Private API - Micro Web App (small public website, accessed through a direct link only) We are well-organized and fully prepared for the project, with a complete test system in place, along with descriptions and documentation. We estimate the total work will take 1-2 weeks, with a fixed budget of $1500. If you are a professional QA ...
I am on the lookout for a talented web developer or software engineer who can help us transform an existing project into a web-based service. The project in question, originally designed to run on a Raspberry Pi, leverages OpenAI's ChatGPT for intelligent conversational responses, along with voice-to-text and text-to-speech technologies for a complete voice-interactive experience. This setup includes integration with Picovoice for speech-to-text, and Amazon Polly for realistic text-to-speech output, all orchestrated through a user-friendly interface. The code for this project is already available on GitHub, having been implemented with a focus on hardware interactions. Our goal now is to adapt and extend this code to function seamlessly on the web, removing the need for any ph...
I need a proficient mechanical engineer to assist me with a project focusing on isometric, orthographic projection and surface development. Key tasks include: - Creating accurate isometric drawings - Generating detailed orthographic projections - Performing precise surface development calculations Ideal candidates will not only have strong knowledge and experience in mechanical engineering, but possess excellent attention to detail and the ability to deliver high-quality technical drawings and calculations. Knowledge of CAD software is a key requirement. This project aims to deliver accurate design plans, so strong emphasis will be put on proficiency and accuracy.
I am in need of a skilled software engineer to create a tailored accounting software in line with the capabilities of established programs such as Tally. Key Features: -The software must feature invoicing, inventory management, and financial reporting capabilities. -Recording of all sales and purchase expenses is a fundamental necessity. Compatibility: - The software must be exclusively compatible with the Windows platform. Integrations: - Integration with bank accounts is a prime requirement. Ideal Skills: - Candidates must have previous experience in developing full-stack professional accounting software. - A proven record in delivering Windows compatible programs is also needed.
Project Overview: We are seeking a skilled IoT Data Engineer to lead the development and implementation of a robust data transfer system from a Wemos D1 mini device to Firebase. The project involves the creation of NoSQL tables and their integration with a relational database system (MySQL), ensuring seamless data flow and storage. The ideal candidate will have a strong background in IoT devices, database management, and comprehensive error handling. Key Responsibilities: Design and implement an efficient data transfer protocol from Wemos D1 mini to Firebase, ensuring data integrity and security. Develop and manage NoSQL databases in Firebase and integrate them with MySQL relational tables, ensuring seamless data synchronization and storage. Design a comprehensive error handling sy...
Experienced Azure and Google Cloud devop engineer to implement/edit existing Azure pipeline to support replication.
I need a professionally drawn layout for a pre-engineered steel industrial warehouse building, particularly for an automotive shop. The total area required is roughly 5000 sq ft, that will service vehicle repair and maintenance. Key Requirements: - Strong understanding of workshop layout design - Good grasp of facility manag...Prior experience with automotive shop designs - Ability to convert concepts into detailed layout diagrams - Knowledge of automotive repair and maintenance shop requirements would be advantageous The ideal freelancer will provide a layout that blends functionality with work efficiency, guaranteeing smooth operations in the auto documentation that will be submitted to structural engineer for certification and approval for local Georgia building codes.
I'm seeking a skilled developer to engineer my Codecanon project with a PHP backend and frontend in Android Studio. The desired outcome is to successfully make the project live. Key aspects of the project: - Backend: PHP (please detail your experience) - Frontend: Android Studio (knowledge necessary) As per UI/UX requirements for Android App part of this project, I don't have any specific needs. However, expect a clean, user-friendly, and intuitive interface for our user base. Skills and Experience Required: - PHP development - Android Studio expertise - Some level of creativity for UI/UX design - Proven track records of successfully completed Codecanon projects. Bid with confidence if you match these requirements, and let's bring this project to life.
Hello, let me introduce myself, my name is Bella, I am a civil engineering graduate student at one of the Sultan Agung Islamic Universities. I am a detail-oriented data entry specialist and I am interested in completing your project. I have skills in Microsoft Office, Microsoft Word, Microsoft Excel and Microsoft Power Point I have experience working in the data entry field for approximately 1 month and I am fluent in most data entry software, such as Microsoft Excel. Is there any particular software this project requires? My experience is also spread across various sectors, starting from practical work at one of the Sultan Agung Waqf Foundation (YBWSA) to the medical faculty building construction project at Unissula Semarang. I also have experience in product sales, and I ...
I'm in need of a proficient structural engineer to handle two small residential projects. A small 80m2 cottage and an outdoor Gazebo/Outdoor Kitchen. Your key duties will be: - Create structural drawings and performing structural analysis to ensure my designs are feasible, efficient, and safe - Determining suitable materials that balance durability, aesthetics, and cost - Carrying out load calculations to verify that the building can withstand environmental stressors The perfect candidate will have a solid background in structural engineering, preferably with a focus on residential buildings. Proficiency in using engineering software for analysis and calculation is highly desired. All outputs are to comply with local Government and building code regulations for Perth Western ...
I'm seeking a detailed market research report on the civil contractors and builders in Gippsland, Victoria, Australia. Your tasks include: - Researching and compiling a comprehensive list of all civil contractors and builders in this region. - Providing the following details for each entity: Contact name, phone number, email address, and physical address. If no contact name, just company name I'm looking for someone experienced in market research, particularly within the construction industry. Proficiency in data collection and spreadsheet organization is crucial. Understanding of the Australian construction market will be an advantage.
I'm seeking assistance with understanding the Corporations Act, specifically as it pertains to civil court proceedings in the Victorian Supreme Court. I'd appreciate the services of a professional with detailed knowledge of the Act and Supreme Court procedures, ideally with prior experience. I need a person who understands both Victorian and New South Wales Victorian Supreme court rules Tasks include: - Comprehensive explanation of the Court procedures for civil cases - Detailed knowledge of the Corporations Act - Assistance with relevant legal forms The correct candidate will have legal experience, with a focus on corporate law and civil procedure. They will also have familiarity with the Victorian Supreme Court and its filing systems.
As an enthusiast in electrical engineering, I am mainly focused on designing a power electronic circuit. The fundamental functionality expected of this circuit involves busbar design. Therefore, I am looking for an experienced electrical engineer with a solid background in power electronics. Key requirements for the project are as follows: - Proficient in designing power electronic circuits - Extensive understanding of busbar design - Capability to troubleshoot related issues Your expertise in this field will significantly contribute to the successful implementation of my project. Your incredible creativity and deep understanding of electrical engineering will be greatly appreciated. Thank you for considering my project, I look forward to working with you.
I am seeking a skilled electronics engineer with experience in automotive development to create a controller for inflating and deflating tyres on a 12V vehicle, specifically a car. The key requirements include: - Ability to autonomously control solenoids' opening and closing based on pre-set and adjustable pressure readings, with no manual interaction required. - Capability to accommodate various tire pressure readings for different driving conditions, such as off-road and high-speed highway settings. The ideal candidate will possess strong problem-solving skills and a demonstrated background in similar automation projects. Knowledge of automotive systems, particularly tyre pressure management, is essential. Familiarity with different driving conditions will also be benefici...
In this project, I am seeking a skilled engineer to develop a CAN bus translator. The purpose of our CAN bus translator is to translate data between two different CAN buses. Key Responsibilities: - Understanding of CAN bus protocols and their communication methodologies - Implementing a solution for seamless translation between two separate CAN buses. Skills and Experience: - In-depth knowledge of CAN bus system is essential - Experience in developing and working with CAN Bus protocols - Strong understanding of digital electronics. While the target protocol post translation is not specified at this stage, having a solid grasp of common protocols such as MODBUS, RS232, and Ethernet/IP will be advantageous. Understanding the complexities of handling data transfers between differe...
I am seeking a mechanical engineer proficient in heat transfer and control disciplines. Your role will be to tackle mathematical problems at undergraduate level in these two separate areas. Although no direct application link is required, a broad understanding of these subjects will be beneficial. Freelancers with a background in mechanical engineering, and strong problem-solving skills are highly valued for this project. Highlights: - Expertise in mechanical engineering, specifically heat transfer and control - Ability to solve undergraduate-level mathematical problems - No specific sector application required - Strong problem-solving skills and attention to detail This project will demand a strong base in engineering principles. A background in academic tutoring or prio...
