Wind Load Compliant Structural Design

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

I am writing to express my keen interest in providing engineering services for your project. With my 9 years of experience in the structural engineering field and a strong academic background, I am confident that I possess the skills and qualifications necessary to successfully execute this project. I am committed to maintaining open and transparent communication with you throughout the project. I will provide regular updates on project progress and address any concerns promptly. I am Proficient at Drafting in Auto CAD, Civil 3D, Tekla Tedds, RAM/ Limcon Connections, Risa, Autodesk Robot, SP3D, Navisworks, BIM Modelling with Revit, STAAD pro, Tekla, 3Ds Max, Sketch up, and rendering with Lumion Pro, V-ray, Cinema4D, D5, Twinmotion and Blender and Structural Analysis with SAP2000 and ETABS. Familiar with IS (456, 875, 1893, 800-1984, 800-2007, 801- LGSS etc.), ACI 318, ASCE, AISC 360-16, AISC 341, AWC NDS, IBC, BS-EN, AS/NZS, Canadian Codes and other. PE stamping for Texas, AZ, CA, FL, Utah, Idaho, Nevada, North Carolina, Massachusetts, Montana, Indiana, NM, NY, Maryland and Virginia states and P. Eng. stamping for Ontario, BC, NS & Alberta Thank you for considering my proposal. I look forward to the opportunity to discuss your project further and collaborate with you to achieve your desired outcomes. Sincerely, Ifam Siddeeq

Hi there,I'm biddin on your project "Wind Load Compliant Structural Design" I have read your project description and i'm an expert in Mechanical Engineering domain therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

Drawing from my extensive experience as a Senior Civil and Mechanical Engineer, one of my areas of expertise lies in structural design for a wide range of applications. I've adeptly checked, specified, and built countless models that accurately analyze wind loads and produce designs with pole height similar to yours. My years of using various engineering software have honed my skills not only in modeling but more importantly, in interpreting and applying standards, including the AS1170 which your project insists on. In addition, I've worked extensively with wind load calculations which gives me unique insights into how to properly distribute loads throughout your structure - a key factor leading to the longevity and dependability of your intended poles. Moreover, I hold myself accountable for delivering workmanship that doesn’t just meet expectations but surpasses them; transparency is essential to me and you can trust that the designs I'll develop/check/simulate for you will be detailed-oriented and compliant with all respective Australian regulations. To sum it all up, hiring me would mean that you are getting an experienced, efficient, meticulous engineer with the tools necessary to complete this project successfully. From my ability to provide aesthetic solutions without compromising on safety and quality of work to my commitment towards economical structures - you can be certain of receiving only the best from me. Let's make your project a success together!

Hello As a professional structural engineer, I have accumulated a lot of experience by participating in various project in the past. My work experience is focused on structural engineering for building permits. So I can help you get the full plan including the structural plan. Please send me a message to discuss more details. Thanks.

Hi, I am Ghullam, a Licensed Professional Structural Engineer with over 7 years' experience, and proficiency in AS1170 standards. I have a passion for designing and constructing sustainable, resilient structures that not only abide by regulatory standards but also offer robustness in the face of adverse environmental conditions. Your project aligns perfectly with my expertise as it requires detailed wind load calculations, simulations and compliance with international standards. My proficiency in using engineering software modules like ETABS, SAP2000, Robot Structural Analysis and Tekla Structures gives me an upper edge in constructing wind-compliant designs for your poles. Complemented with my experience in producing construction drawings to manage projects from inception to completion, I can ensure your already existing designs are checked and improved for sturdiness while making certain the brackets, pole and footings meet the required standards. My appreciation for efficient design comes from years of delivering structures that balance economy, strength and beauty- qualities that will absolutely benefit your project. Let's collaborate on this project and build marvelous wind-compliant structures together!

Hello, I recently saw your project details for "Wind Load Compliant Structural Design." After reading the job description, I quickly realised that your requirements precisely match my abilities. I am a master of detail, colour 3D modelling, and rendering design, 3D/2D home plan, home model interior, exterior, elevation, map, object model, 3D human characters, etc. Please ping me so we can discuss. https://www.freelancer.com/u/kkirandeep582 Thanks & Regards Kirandeep Kaur

I am Seyed Mohamad Javad, a versatile Mechanical and Civil Engineer with a profound knowledge in structural design and analysis. Over the years, I’ve honed my skills to intricately understand and design structures that effectively withstand wind loads. My experience with mechanical analysis software such as Ansys and COMSOL combined with my proficiency in MATLAB allows me to build precise wind load models for your 6.5m pole design. What sets me apart is my network of experts in multiple fields of engineering including Mechanical, Electrical and Material Engineering. With us combined, we have ample capacity to thoroughly check, specify and simulate the entire structure, thereby ensuring compliance with AS1170 standards. This project requires deep understanding and meticulousness, which align perfectly with our core competencies. Given the opportunity, I promise you not just high quality structural design but maximum value for your investment. Offering comprehensive solutions from modeling and analysis to precise construction designs of brackets, poles and footings that secure against wind load, you can trust us to exceed your expectations at every milestone. Open for further discussion!

Hello, I have over 5 years of experience in(Wind Load Compliant Structural Design) as i am expert in the 2D/3D CAD/CAM software. When do you need this finished? I comprehend how annoying it is and can fix it for you quickly! Please see the sample I fixed. I have previously worked on a project of the exact same type for a different client. I have the great ability to create all kinds of floor plans and site plans in 2D and 3D. In the past, I have worked on software. I am currently using 2D/3D AutoCAD, Revit, Maya, 3DsMAX, and 3D modeling as my working software. So please, I appreciate it when you answer me. Thank you and greetings. Mannu.

I read your project details. I'm very much interested to do this project. I'm already experience in it. You can check my previous works at my portfolio section. Please provide some drawings for better understanding. Please message me for further discussion. I'll provide some of my previous work sample. I'll deliver required Design file according relevant code in MS Tower software and detailed drawing file. You will get complete structural solution of following civil structures: 1. RCC Structures (Residential, Commercial, Industrial) 2. Steel Structures (Shed, Multistoried Mezzanine, Silo etc.) 3. Tower (Transmission, Telecommunication) 4. Poles (Steel, SPC) 5. Bridges (Steel, RCC, Composite) 6. Composite Structures (Residential, Commercial, Industrial) 7. Foundation (Single, Combined, Mat, Pile, SPC, Screw etc.) We work with the following Analysis, Drawing and Modeling software: 1. Staad Pro. 2. Etabs 3. MS Tower 4. Auto CAD 5. RAM Connection 6. SketchUp 7. Tekla 8. Revit 9. Robot 10. Advance Steel 11. ASDIP Foundation 12. SAP 13. Tekla Tedds 14. GRASP 15. Staad Foundation 16. CSI Detailing 17. MIDAS Civil

Hello Sir, I’m an experienced structural design engineer with 17 years of experience in different types of structures, holding Masters and Ph.D. degrees in structural engineering, and I am confident that I have the expertise necessary to provide you with the required wind load calculations as well as structural analysis, design, and stability according to AS1170 standards I am utilizing cutting edge structural analysis software like SAP2000, ETABS, RFEM6, and ANSYS software, and many other software Please share more information to study further, have a look at my profile for more information about my structural design services as well as previous clients reviews, and I look forward to hearing from you. Best regards Mohamed Gomaa, Ph.D. Consultant Structural Engineer

My name is Tamara Alejandra Fuentes León. I am a Senior Civil Engineer. I am proactive with high capacity to work under pressure. High level of creativity and initiative. I have more than 15 years of experience working in design structures. I have developed concrete / steel / wood / masonry structure project. By hiring my services you can get: - Design Structure - 2D Drawings (Floor plans, Sections, Details, Connections) - 3D Modeling/Rendering - Technical documents for Project Engineering (civil - structural area) All this by using the following software: - Revit - CYPECAD / CYPE3D - STAAD - SAP2000 - ETABS

With a background in structural engineering and a strong proficiency in CAD/CAM modelling software, I am confident in my ability to handle your Wind Load Compliant Structural Design project, ensuring every element complies with the AS1170 standards. My meticulousness and high degree of precision make me well-placed to build wind load models and check specifications for the pole's components. Over the years, I've embodied a deep understanding of wind load calculations, which is instrumental in designing a pole that can support antennas, surveillance cameras, solar panels, signs, and equipment enclosures. My experience managing projects of various sizes and scopes positions me to deliver your project with unrivaled efficiency, adhering to the given timeline and budget. In conclusion, by leveraging my expertise in structural engineering, attention to detail and proficiency in modeling software like CAD/CAM, I guarantee you a technically sound design while upholding exceptional quality standards. Choose me for this project; together we will ensure a robust structure capable of withstanding wind loading whilst supporting all your equipment needs.

Hi. Thanks for your posting. I have just read your proposal and I am sure I can complete the project on time. I am a mechanical engineer who has 15 years of experiences in wind load analysis(ANSYS CFD/FEA). Please contact me so that I can show you my wind load analysis works. Please contact me to discuss the project in more details. Waiting for your contact now... Thanks. Best Regards.

At Vutuk Design and Media, we specialize in providing comprehensive structural engineering services, including wind load-compliant structural designs. With our team of experienced engineers and designers, we're excited to take on the challenge of your project. To ensure that we deliver results that align with your needs and expectations, we'd like to gather some additional information: Could you provide detailed information about the structure or building for which the wind load-compliant design is needed? Understanding the specific requirements and constraints of the project will enable us to develop a customized design solution that meets your needs. Are there any specific wind load standards or regulations that need to be followed? Ensuring compliance with local building codes and industry standards is essential for the safety and stability of the structure. Do you have any preferences or requirements regarding materials, construction methods, or architectural aesthetics for the structural design? We're committed to delivering a design that not only meets functional requirements but also aligns with your vision for the project. Please don't hesitate to reach out if you have any further questions or would like to discuss the project in more detail. Thank you for considering Vutuk Design and Media for this opportunity. We look forward to the possibility of working together. Best regards,

With ten years of experience in civil engineering and a proficiency in AutoCAD, I am well-prepared for the project of developing and checking the structural designs for your pole. I have extensive knowledge and experience in RCC structures, which will prove beneficial in ensuring the pole can withstand significant wind loading at its height of 6.5m. My expertise with software such as Safe, Sap, and 3D Max further bolsters my suitability for this role. A driving value for me as an engineer is to guarantee accuracy and quality in all that I do. This is zealously crucial when building wind load models; any missteps could be detrimental. However, I have maintained a high level of meticulousness throughout my career and will ensure you make designs that comply fully with the AS1170 standards. Overall, my ability to create structural and architectural plans, familiarity with wind load calculations added to my rigorous approach towards projects makes me the ideal candidate for this endeavor. Rest assured that choosing me will guarantee you quality, accuracy, and a timely completion of the work at hand. Looking forward to being a part of making your vision a reality!

Dear client... As a detail-oriented and innovative Structural and Mechanical engineer, I have a passion for creating unique and sophisticated spaces that reflect the individuality of my clients. With over a decade of experience in the industry, I have honed my expertise in both Structural design and Mechanical engineering, allowing me to bring a creative. If you give me a chance, I will do best for you. Let's discuss more via chat. Please contact me. Best regards.

Hello Sir, I came to understand that you need a Wind Load Compliant Structural Design. I have already completed similar work. I want to show you some of my 3D creations. Softwares in which I specialise include 3d Max/Maya, Blender, Revit, C4D, and other 3D programmes. I also work with AutoCAD. - You will receive all 3D model file formats, such as OBJ, STL, etc. - Create any type of 3D model, including character and object models. - Interior/exterior design for home plans, models, etc. My top concern is your complete satisfaction since I want to build a long-lasting business relationship with you. Regards and thanks Harvinder

As an experienced structural design engineer with fifteen years in the field, I possess a unique skill set that perfectly aligns with your project's requirements. Over the years, I've honed my expertise in structural engineering, proficiency in modeling software like AutoCAD, SAP, ETABS and a deep understanding of the AS1170 standards for wind load calculations. My knowledge and proficiency in wind load modeling prepares me to analyze the existing designs for your pole infrastructure, ensuring they can withstand the anticipated forces at your specified height. Moreover, my familiarity with various design codes including ADIBC 2013, ACI and AISC exemplify my meticulousness and focus on precision. This ability to interpret and apply industry standards will be highly beneficial in delivering a safe and compliant design for your pole structure. Equally important is my intrinsic curiosity to ensure every element of a design is accounted for. This manifests in an exhaustive analysis of structural elements – from brackets to footings. Notably, I’ve paid significant attention to these elements across my career, whether it’s designing concrete or steel buildings. You can trust in my thoroughness to specify and design appropriate brackets, poles, and footings that will uphold against wind loading while complimenting the existing designs.

Hello I am Rade, a mechanical engineer from Belgrade - Serbia. I have more than 7 years of working experience in mechanical engineering. I did most of my projects in the SolidWorks software package. In my portfolio, you can see some of the projects I have worked on so far during my career. In my career, I have done many projects for the military, food, and pharmaceutical industries. All these projects required a high level of professionalism and skills in mechanical engineering in general. I read your project and think I can help you develop a solution. Look at my portfolio, you might find exciting projects for you. I believe that I can do the job quickly and efficiently. Of course, you should share with me some more information, ideas, or drawings that you already have so that I can learn more about the project and the specific goal that needs to be achieved. I hope we will cooperate on this project and also on future projects. Best Regards