3d modeling

$30-250 USD

完了済み

投稿日:

8か月前

$30-250 USD

完了時にお支払い

3D Modeling Task: Background: =========== We build small electronic modules based on a modular platform. Each finished product consists of: • A circuit board with electronic signal connectors attached to it • An extruded aluminum enclosure • Front end plate with holes for the signal connectors • Rear end plate with holes of the signal connectors Here is an example of a finished product (view in any browser other than Safari/macOS): [login to view URL] Many of our customers have asked us for 3D models of our products, but we do not have any 3D modeling capability in our company. We did have one customer create a complete model of one product (PRL-425T, shown on page linked above with the actual model linked below), and we would like to use this as a starting point for a library of subassemblies that can then be assembled into complete assemblies. Solidworks model is available, here: [login to view URL] We have been able to find 3D models (typically STEP) of many of the connectors that we use, and we have 2D drawings of our endplates and enclosures, but we do not have the ability to put them all together into completed models. Task Phase 1: ============= From the resources available on this page (please review the "form factor" explanation carefully): [login to view URL] create a Solidworks Assembly of the PRL-414B-SMA, with reusable hierarchical components as follows: -43 Endplate Subassembly Component: • SMA connector, washer, and nut as a component • 4 SMA connector components, the -43 endplate, and 4 endplate screws. • This should already exist in the PRL-425T model, but I don't know if the SMAs are hierarchical components -123 Endplate Subassembly Component • -123 endplate, and 4 endplate screws * SMA connector, washer, and nut component from above • Toggle switch, washer, and nut as a component • DC jack PRL-414B-SMA Assembly: • -43 Endplate Subassembly Component: * -123 Endplate Subassembly Component * PRL-970 Series Extrusion, 2.8" length Delivery should be a hierarchical Solidworks Assembly and an exported STEP file, which we will be reviewing in eDrawings Viewer. If the work is satisfactory we will proceed with Phase 2. Task Phase 2: ============= Create the necessary Subassembly Components and then the higher level assemblies for our most popular products: • PRL-414B • PRL-RJ45-SMA • PRL-444-BNC • PRL-444-SMA • PRL-444LV-SMA • PRL-425QLT-SMA • PRL-420RS • PRL-4110-BNC • PRL-4110-SMA • PRL-350TTL • PRL-601T-K-BNC This fixed-price project is for Phase 1 only; I include Phase 2 so that you understand why we want the hierarchical component structure. Please let me know if the instructions are not 100% clear! Thanks!

Solidworks

3D Modelling

プロジェクト ID: 37233430

プロジェクトについて

23個の提案

リモートプロジェクト

アクティブ 8か月前

お金を稼ぎたいですか？

メールアドレス

Freelancerで入札する利点

予算と期間を設定してください

仕事で報酬を得る

提案をご説明ください

登録して仕事に入札するのは無料です

アワード者:

@kingstonLQC

Hi there, I am pretty confident about this project because of my experience with Solidworks and electrical connectors. I have been using Solidworks for 10 years now and had once worked for a company that makes similar products (EDAC Inc.). I was the product engineer there and worked on drawings/3D models for those parts on a daily basis. Based on the description and file provided, it looks like the 3D model of all the components are available already and they only need to be put together in an assembly file with necessary mating and rendering. I am new to Freelancer and is looking to build my profile, therefore I am bidding to the lower end. I am located in Canada so we won't have any communication issues or time difference. Feel free to let me know if you have any questions! Thank you. Kingston

$40 USD 5日以内

0.0

(0 レビュー)

0.0

この仕事に23人のフリーランサーが、平均$117 USDで入札しています

@biribonwajudith

Greetings, I believe I am a good match for this project because I am a creative and practical professional that is well conversant with CAD tools(Solidworks, Fusion 360, and AutoCAD) and Solidworks. I have the industrial capacity and competence to deliver detailed 2d and 3d designs for manufacturing and analysis. I can design for manufacturing by techniques such as laser cutting, CNC machining, 3d printing, injection molding, etc. As an experienced design engineer with 6 years of industrial and practical experience, I would be delighted to work on this project and I am available to start working right away. Please contact me through chat for further discussion and for quality and timely service. Kind regards,

$140 USD 7日以内

4.7

(37 レビュー)

5.4

@studiogo07

Hello There I have read your project "3d modeling". We would like to offer our professional 3D modeling services for the creation of a Model , Floorplan video and banner advertisement for your software. Our team understands the importance of visual representation in the advertising industry, and we are confident that our skills and expertise can help bring your vision to life. We have extensive experience in creating high-quality 3D models for various industries, including the construction and engineering sector. Our team is equipped with the latest software and hardware technologies, enabling us to produce highly detailed and realistic models. For your project, we will create a 3D model that showcases the deep excavation, building foundations, tunnels, subway lines, landslides, gravity walls, ports, and other features of your software. We will also incorporate the analysis results into the model to provide a complete picture of what is happening below and above the ground. We guarantee that all of our work will be delivered on time and to the highest standards of quality. Our team is dedicated to ensuring customer satisfaction, and we are confident that you will be pleased with the final result. Please let us know if you would like to proceed with our services. We look forward to the opportunity to work with you and bring your vision to life. Sincerely, STUDIO GO

$40 USD 1日以内

5.0

(22 レビュー)

5.3

@Royale

Dear sir. I'm a mechanical engineer, I have 6+ years of experiences in product design, 3d modeling and rendering using solidworks, fusion 360, solidEdge. I specialize with experiences of product design in sheet metal, injection molding, 3d printing, lazer cutting. • manufacturing drawings based on 3D models/assemblies. • creating flat patterns(sheet metal). • converting STL files to solid models (STEP, IGS, X_T). • creating STL, IGES and STEP files for 3D printing. • creating DXF files for CNC/Laser/Plasma cutting. • 2D CAD drafting in AutoCAD (architectural and technical drawings, converting from pdf/images to AutoCAD). I have worked on several similar projects and will deliver quality of work in tight deadlines. Thank you.

$30 USD 1日以内

4.9

(13 レビュー)

4.8

@fayyazs789

Hi there I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your 3d modeling plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

$160 USD 5日以内

5.0

(5 レビュー)

4.5

@CHIRAG1190

Hey there! Thanks for considering me to work on your CAD project! My name is Chirag and I have 10+ years of experience designing and developing products. I specialize in product design and development with experience in sheet metal, injection molding plastic parts, 3D printing, HVAC piping, casting design and more. I am confident that I am the right person to create the CAD you are looking for. With 3D modeling and rendering skills, CAD/CAM expertise, Solidworks knowledge and more I can ensure that the end result will be exactly what you are looking for. If you'd like to discuss further please don't hesitate to reach out! Thank you for considering me for this project.

$200 USD 8日以内

5.0

(28 レビュー)

4.5

@nilsonamaraljr

Hello! I'm an experienced design and engineering professional with over 8 years of expertise. I specialize in: SolidWorks for 3D modeling, simulations, and automation with VBA. Sheet metal design for efficient and precise solutions. 3D printing to turn concepts into physical objects. Reverse engineering for product analysis and replication. Fusion 360 and Inventor proficiency. CNC programming and Gcode generation. I'm dedicated to delivering high-quality results on time and within budget. Let's collaborate to bring your projects to life.

$30 USD 2日以内

5.0

(25 レビュー)

4.2

@lvishwakarma2000

⭐Recommended Freelancer⭐ Hi, There. Very glad to place bid on your project. I have read your project descriptions carefully. As I'm Solidworks(2021~2023), Fusion 360 expert, I have many experience with 3d modeling,Sheet metal design, product design and render for 3D PRINTING, Laser Cutting and MANUFACTURING purpose. If you are hire me, your project will be complete very quickly with better quality. Thanks for your review. Regards.

$50 USD 1日以内

5.0

(7 レビュー)

4.3

@rrdeploy

Hey Client, I {{9+ years experience}} have planned the strategy partially for this project and actions to make it simple and transparent for us to work together. Should you have any questions, feel free to reach out! Best Wishes, Ravi Raj S.

$30 USD 1日以内

4.9

(16 レビュー)

3.2

@cadncamservice

Dear Sir! I am a SolidWorks expert/product designer/mechanical engineer. I checked your job carefully and I have a great interest in your project. I have many experience in your project and can deliver perfect result within deadlines. Here are my service; ⭐Creating STL, step and X_t files for 3D Printing and Manufacturing. ⭐2D technical drawings for manufacturing. ⭐creating DXF file for CNC/Laser/Plasma cutting. ⭐3D modeling/rendering of assembled parts. If you hire me, then your project will be completed more successfully. I am waiting for good news. Best regards Yana

$30 USD 1日以内

3.2

(6 レビュー)

4.0

@mohamed11gou1

Hello, my name is Mohamed, and I am here to offer your company 3D modeling services. I have extensive experience in this field, having worked on a wide variety of projects over the past three years. With my background in architecture, firearm design, hard surface modeling, interior design, and custom 3D projects, I am confident that I can provide the necessary skills to complete your project. Additionally, I am highly aware of the importance of ensuring quality while working on projects such as this; for this reason I guarantee that you will receive satisfactory results at an average rate of 79%. If you're interested in my services or would like more information about freelance work, please don't hesitate to reach out. Thank you for considering me for this project!

$30 USD 1日以内

5.0

(1 レビュー)

1.9

@rashidamjad

Hi there, I am thrilled to express my interest in your 3d modeling project. Leveraging a rich background spanning 4-5 years in 3D Modelling and Solidworks, I am well-equipped to bring substantial value to your initiative. Please note the initial bid is provisional. A final quote will be shared post a thorough discussion on the project requirements or after reviewing any detailed documentation you can provide. May I request any available detailed documentation? Additionally, I am open for further discussions to delve deeper into specific aspects of the project. I encourage you to review my profile, which showcases my portfolio, past jobs, and client reviews, reflecting the quality and professionalism I infuse in every project, always striving to offer a competitive budget without compromising on quality. Thank you for considering my proposal. I am eagerly looking forward to the opportunity to collaborate and contribute to your project's success. Please let me know if you require any additional information. Best regards, Rashid Amjad.

$250 USD 8日以内

5.0

(1 レビュー)

1.9

@usama23425

Hello! My name is Usama and I'm a content writer on Freelancer.com. With over 10 years of experience in the field of writing, I am confident that I can provide the best solution for your 3D modeling project - from creating reusable hierarchical components to producing complete models from an existing STEP file. I specialize in providing high-quality content that resonates with the target audience. From web copy to product descriptions, I can provide compelling content that captures the attention of your visitors and drives conversions. Additionally, I have extensive experience in writing eBooks on a variety of topics and business plans. I'm excited to hear from you about this project! Please let me know if the instructions are not 100% clear so we can get started right away! Thank you for considering me for this job.

$140 USD 7日以内

0.0

(0 レビュー)

0.0

@amnaoctacom

Hello! My name is Syeda Amna and I am a creative designer with over 10 years of experience in the field. I understand that you are looking for someone to create a 3D model of your endplates and enclosures so that you can use them for future assemblies. I would like to propose myself as the best fit for this project because I have the necessary skills and experience to do this job properly. https://www.freelancer.com/u/amnaoctacom I have extensive knowledge of Solidworks, which is what we will be using to create the hierarchical component structure needed for the project. Additionally, I have experience using Adobe Creative Suite (specifically Photoshop), InDesign and After Effects which will be useful when it comes to creating the necessary subassemblies. I also have expertise in graphic design services such as logo design and branding as well as ebook design which will be beneficial when it comes to producing the final product. Additionally, I have experience in print design (particularly with brochures, flyers and posters) which will be needed for producing the model itself. I am confident that my skillset makes me the perfect candidate for this project and I would love the opportunity to discuss further how I can help you reach your goals at an affordable rate.

$222 USD 2日以内

0.0

(0 レビュー)

0.0

@sherrykhan97

Hello, I understand the requirements for creating Solidworks assemblies and components for your electronic modules. Here are my questions: ◼ Do you have specific preferences for the version of Solidworks you'd like these assemblies and components created in? ◼ Is there any particular naming or labeling convention you'd like me to follow for the assemblies and components? Why Choose Me: ➔ I have extensive experience in 3D modeling and assembly design using Solidworks. ➔ I can ensure that the assemblies and components are structured hierarchically for ease of use. To discuss the project in more detail and get started with Phase 1, please click on the CHAT button. I'm looking forward to working with you. Regards, Shahrukh

$250 USD 10日以内

0.0

(0 レビュー)

0.0

@zainalikhan136

Hello there! I'm Zain Ali, a senior developer with 7 years of experience in WordPress, Shopify, React, Laravel, HTML, CSS, Bootstrap, JavaScript, jQuery, Ajax and more. I understand that you are looking for someone to create a library of subassemblies that can then be assembled into complete assemblies. I believe I am the perfect fit for this project as I have solidworks experience which will be invaluable when it comes to creating 3D models. Additionally I have experience with 3D modeling tasks which will be pivotal in helping me complete this project successfully. I understand that you would like the model to be in Solidworks so that we can use hierarchical components to make the assembly easier to manage. With my expertise in Solidworks I am confident that I can deliver an accurate model that meets all your needs.. Please let me know if any additional information is required before we begin work on this project. Thank you for considering me for this job!

$130 USD 3日以内

0.0

(0 レビュー)

0.0

@prdraco

Feel free to contact me for 3d modeling .shoot me message to discuss further more details .i provide the comments,images,videos,demos and live sessions in order to help the clients. Make payment only after the work is done. Thank you

$150 USD 3日以内

0.0

(0 レビュー)

0.0

@khairulfahmi0599

Thanks for considering me for this project! I'm confident that I am the best fit for this job because of my experience in Mechanical Engineering and Solidworks. Specifically, I have the necessary skillset to successfully complete this project. As part of Phase 1 of the project, I would be creating a Solidworks Assembly of the PRL-414B-SMA and then delivering it as part of the final product. This should already exist in the PRL-425T model but I don't know if the SMAs are hierarchical components. For Phase 2 of the project, I would be creating subassemblies for all of your most popular products (PRL-414B, PRL-RJ45-SMA, PRL-444-BNC, PRL-444-SMA, PRL-444LV-SMA, PRL-425QLT-SMA and PRL-420RS). I understand that you would like to have a hierarchical component structure so that it is easier for you to assemble the models into completed models in the future. If you choose me for this project, I promise to deliver an accurate finished product that meets your needs exactly how you want it

$30 USD 1日以内