Create artwork for a 6-pack (750ml) shipper carton

We are looking for someone to help us design our box. We know the size we need and we have most of the art for our brand. We are looking for you to incorporate the art and direction we give you into a full design for our box. The main art to be used is the art we provide, but you are welcome to incorporate your own art in parts if you think it adds to the design. If you use any other art it has to be your own, and can not be taken from any anywhere else; no stock images and no images not owned and made by you. Instructions: - The box will be WHITE. - The box is going to be printed using a 4 color method, so you will need to only use 4 colors when submitting a design (black is counted as a color). Our label is made up of more than 4 colors - so when you use the fairy and the "Wildfly" logo, you will have to change it so that it can be printed in only 4 colors. - Use any of the logo variations (1-4), just make sure to consistently use the same one on all the facets. - We need the layout for the carton printer. While a 3d rendering would be nice, it is not the priority. - Final images will need to be vectorized, as the dimensions of the carton given below are not final. - I added a box example but please DO NOT copy it exactly. We need you to design 3 different panels, where each of them will then be mirrored (see [login to view URL]; panels D,E & F will be blank): Panels A1/A2: A1 is the front side of the box and A2 will be mirrored on the back side. The dimensions for this panel are 250mm L X 305mm H, but please remember that it is going to be printed so there can not be any art or designs near the edge (solid colors are ok though). For these 2 panels, we want the fairy from the label to be featured + we also want our brand name "Wildfly". It's up to you if you prefer to use our logo (use either [login to view URL] or [login to view URL] attached) or to simply use the name with a different commercially available/free font. We would also like to have the words "Spiced Absinthe" on the front (taken from label). Once again, you can use the font we have on our label or one that you create or one that is commercially available. The front of the box will also need to say in small lettering "6-750 ML - 4.5L" and "70 Proof". Panels B1/B2: B1 and B2 are the left and right side of the box. The dimensions for this panel 176mm L X 305mm H. The top 60-65% will be left blank for shipping and packaging information. The bottom 35-40% of the box should have at minimum our fairy and our name "Wildfly". Anything else you choose to add is up to you. Panels C1/C2: C1 and C2 will be the top of the box. These panels will meet in the center when you close the box. The dimensions for these panels are 250mm L X 88mm H. We want something simple on there, likely just our name, but feel free to add additional things if you would like.