ATMEGA328 code required

$30-250 USD

キャンセル

投稿日:

8年近く前

$30-250 USD

完了時にお支払い

We need a code written for ATMEGA328P MCU in Atmel Studio. Code Structure: - Two buttons : Button 1 & Button 2 - Four LEDs : LED1, LED2 ,LED3, LED4 and LED5. Functionality of the Button : Button1 Used for : - Starting the system. - Selecting Sequence1 and Sequence2 - Stopping the System after Long press of 5seconds. Button2 used for : - Starting the Sequence1 or Sequence2 after selection - Stopping the Sequences. LED1 & LED2 for Battery indication if Good - LED1 is ON or Low Battery - LED2 is ON Operation: When Button1 is pressed if the Battery level is Good only then system will work. Now at good battery Level, When Button1 is pressed LED1-ON(power-on Indication) and LED3-ON(Run Sequence1 Indication). Pressing Button1 again will help to select Sequences between Sequence1 and Sequence2. Once the specific Sequence is selected , pressing the Button2 will start the sequence and pressing it again will Stop the running sequence. Once the sequence is STOPPED , you can select the sequence again and then run it. When you press the Button1 for Long press of 5 seconds, the system will switch off. Sequence1 - Blinking LED5 at 1second Sequence2 - Blinking LED5 at 0.5second. Please write to me about your queries and how you can do this. Time-line is 2days.

C Programming

Embedded Software

Microcontroller

プロジェクト ID: 10966938

プロジェクトについて

12個の提案

リモートプロジェクト

アクティブ 8年前

お金を稼ぎたいですか？

メールアドレス

Freelancerで入札する利点

予算と期間を設定してください

仕事で報酬を得る

提案をご説明ください

登録して仕事に入札するのは無料です

この仕事に12人のフリーランサーが、平均$159 USDで入札しています

@CoherentTech123

Hello Dear, we are a team of experts with a cumulative experience of over 50 years in the field of ebedded systems, programming, electronics and prototype development. we have worked in many applications including Smart Grid, Wireless, Telecomm and medical. We have the required tools to work on mega328p (32 QFP). Infact we have the hardware and the AVR MK-II ISP also. I assure you the best quality work. Regards Ch

$222 USD 1日以内

5.0

(9 レビュー)

4.5

@Magicspell

Hi, if you are interested, I will work on this and try to finish this today. Let me know if you are interested. Thank you!

$155 USD 1日以内

4.5

(4 レビュー)

3.7

@amelectronics

Hello dear I have worked on Atmel studio and can program ATmega328 in assembly and C. I will make your project practically on breadboard and will provide you circuit and code. If you wish we can discuss in chat.

$200 USD 5日以内

5.0

(3 レビュー)

3.4

@Enggtechworld

i have a good knowledge about AVR programming and have done number of projects using arduino board.i am also working with number of modules and sensors.i also have good knowledge about its hardware for interfacing with micrcontroller.I will do your work easily and accurately

$40 USD 3日以内

5.0

(2 レビュー)

1.5

@SherifHarhash

I will do this project and give you (.hex) file in two days with the wanted mony ,I will do this project and give you (.hex) file in two days with the wanted mony,I will do this project and give you (.hex) file in two days with the wanted mony,I will do this project and give you (.hex) file in two days with the wanted mony

$66 USD 2日以内

0.0

(0 レビュー)

0.0

@intellisoft5

Hello Sir/Madam, We have gone through the details you have provided and we have already worked on a similar project before and can deliver as u have mentioned and would be pleased to work on this with you to deliver the results that you have expected and we have already worked on a similar project before and can deliver as u have mentioned We are sure you will not be disappointed if you give us this opportunity. Our team is experienced, creative & efficient enough to get your job done well. We have an impeccable record and all our clients enjoy working with us, we are sure that you will too, our prices are cheapest in market. can u provide your email or sky-pe etc for further discussion about the project I am ready to discuss with you with best Regards

$155 USD 3日以内

0.0

(0 レビュー)

0.0

@jitendrabaraiya

i can do your job . within a time limit with your satisfaction.

$500 USD 30日以内

0.0

(0 レビュー)

0.0

@RachitPradhan96

Hi there! Hope you're doing well. I have high expertise in Embedded Systems and have previously worked on various 8,16,32-bit MCUs and DSPs. Kindly evaluate my profile regarding the same. I shall be able to provide the code within 24 hours of assigning me the project. Another added advantage of working with me is that both of us can avoid conversion rates if you post the project in INR, thus resulting in a lesser Freelancer fee compared to USD. Looking forward to hear from you over chat. Regards, Rachit Pradhan, Mumbai

$45 USD 0日以内

0.0

(0 レビュー)

0.0

@ircrashed

Hello I have got your job posting “ATMEGA328 code required” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the embedded systems(Arduino ,ARM processors ,PIC microcontrollers,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so i will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure. I am always available on Email and Skype. Please have a voice or video chat if necessary. I will be available more than 60 hours per week and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat

$50 USD 1日以内

0.0

(0 レビュー)

0.0

@ahmedmoustafa94

I worked on atmel studio for several projects on both atmega 16 and atmega 32 I built custom pcb boards for those micro-controllers. my projects: temperature control system , daq system for formula student car , autonomous rover back cansat. I will deliver the atmel project doing the required project along with proteus simulation that shows the required specifications. looking forward to hear from you.

$35 USD 2日以内