Fluid dynamics expert needed asap to update a design to meet certain parameter and run simulation to confirm it

cumo I'm a PhD student in soft matter physics. I regularly work with Fluid dynamics simulation and theory. Looking at your Bowl, a simple simulation (using underlying Bernoulli Principle) tells that the directions in which fluid will be injected and how it is ejected, will control the vacuum at the bottom of the cone. You can let me know if there are any further details and I will start simulating. I can simulate in Autodesk. If you have any preferable software, I can work in that as well.

I'm civil engineer expertise in Structural Analysis and Design and I have more than 6 years of experience and having strong knowledge in geotechnical, water resource, building infrastructure and industrial, mining and metal industries. I am an energetic, ambitious person who has developed a mature and responsible approach to any task that I undertake, or situations that I'm presented with. I expertise in **Structural Design **Fluid mechanics **Soil mechanics **Road design **Design of steel and Reinforced Concrete structures. **Piping System and Water/wastewater treatment. **Plumbing, Drainage and sewage etc. **GIS **House Plan drawing **Architecture, Civil & Structural Engineering calculations **RC detail drawings etc **Construction projects at the planning **Quantity Estimating (QS) and management **BOQ estimation and Drafting. Proficient at Drafting in Auto CAD, Civil 3D, BIM Modelling with Revit, STAAD pro, Tekla, 3D Max, Sketch up, Lumion Pro and Structural Analysis with SAP2000 and ETABS.

cumo Hello, I am CAD/CAE/CAM expert mechanical engineer with many years' experience. Certified in SolidWorks on Expert level (CSWE). Let we clarify what parameters you need to control and to achieve. I will do simulation to validate new design. Your project in my hands is guaranteed Let me done you project. Kind regards!

cumo Hi Greetings! I am a Mechanical with expertise in CFD. I can use both SolidWorks and ANSYS Fluent for CFD. I have done projects that include CFD of vertical axis wind turbine to optimize TSR, CFD of jet engine compressor for recovery of wake region, Design of wing to optimize lift, etc. Given my experience of CFD projects, I believe I am the right person for this project. For this project, I will use SolidWorks for 3d Modelling and for CFD I will use ANSYS Fluent. Along with CAD and analysis files, I will provide a rich technical report explaining the results and steps involved. Kindly contact me to discuss further. Regards,

Hi there, I am an Aerospace Engineer with MS in Aerospace CFD (Computational Fluid Dynamics). I have an experience of 3 years working with Government and private organizations. I have studied Turbomachinery, Aero Vehicle Design and Computational Fluid Dynamics as my core in MS program and have successfully completed several projects related to CFD and turbomachinery. Few examples are "Design and analysis of centrifugal Compressor and high pressure turbine for a turbofan engine", "Analysis of first stage of turbine exposed to UHTs", "Design and analysis of fan Compressor" and several other projects. All these projects are done in ANSYS with ICEM CFD as the meshing tool while Fluent as the solver. I have also formulated generic MATLAB and FORTRAN codes for AVD of different aircrafts and conduction, convection, diffusion, advection and convection-diffusion problems which involve solving heat transfer problems by incorporating efficient numerical techniques. I have also been working on ANSYS Fluent and CFX for past three years and have good experience working with the simulations of turbomachinery. All the projects are in my portfolio. I can share with you the list of projects I have completed and you can have a look at my portfolio as well for further details. Feel free to contact me any time. Looking forward to working with you. Thank you!

cumo Hello, I have opened you geometry and there are a lot of small tubes. I would like to know more about boundary conditions, inlet outlet and etc. Please take a look my portfolio and you will see that I know something in CFD simulation

Cumo Hello I am a mechanical and aeronautical engineer with 5 years experience based on CFD in aerospace industry. I am professionally using Star-ccm CFD tool. I can perform both external aerodynamics and internal flow analyses. Pls send me message via chat for more information. King regards.

I am an Aerospace Engineer with MS in Computational Fluid Dynamics and Aircraft design. I have an experience of 4 year in for Simulation and Analysis using CATIA and SOLIDWORKS. I had done many project including detailed design modelling of aircrafts on catia and plane maker for analysis and turbo machinery components for Ansys Analysis. Some of them are mentioned in my portfolio. You may share details of your work. We can discuss further about your task in chat. Feel free to contact me any time. Looking forward to working with you. Skills: - Product Design, CAD/CAM, Mechanical engineering, Structural engineering. - Solidworks : 3D Modeling, Assembly, 2D Drawing, Analysis in Ansys

cumo Hi, My name is Ishwar, I am a Mechanical Engineer with many years of experience using FEA and CAD tools. Please open a chat so that we can discuss it more. I will do my best to complete your project perfectly with high responsibility and passion. You will get wonderful results. Thanks in advance, Ishwar

CUMO Hi! I am Mechanical Engineer, Product designer and Fluid dynamics expert! I can send you my previous work as a sample to have a look. You can also checkout my portfolio. https://www.freelancer.com/u/doggar302?page=portfolio&w=f Chat for further details! Thank u!

Hey! I am an Electrical Engineer with specialization in Engineering, Mechanical Engineering, Computational Fluid Dynamics, Matlab and Mathematica and Mathematics. I have high proficiency in Electrical Engineering, HVAC, LTE system model, Thermal system design, FPGA, Verilog / VHDL, Matlab/ Simulink, Microcontroller, Modeling, optimization, simulation of building energy systems: PCB Layout, Arduino and have been working on Industrial Automatics and Electronics. My fields of interest are Schematic design, Prototyping, PCB Design, Development of Electronic systems, Firmware and Software development. I would love to discuss this project with you and meet your exact requirements. I am confident I can provide you with top-notch materials that will fit your needs. Once you share the project, I will have a look & confirm if I can do it. I’m honest, creative and a unique person to acarry out your tasks given to me. Leaving your project with me is a privilege; I will make sure that the project is done in a perfect way and do my very best until you are satisfied. I pride my work on being professional, of the highest quality and always delivered on time. Thanks #Fluid dynamics expert needed asap to update a design to meet certain parameter and run simulation to confirm it

Good day I am a mechanical design Engineer with work experience in computer aided design and computer aided engineering I will do your cfd simulation project by performing: -3D modelling of the fluid flow domain using SOLIDWORKS -CFD simulation and analysis using ANSYS fluent It'll be a nice time working for you Best Regards

cumo, Inventor and CFD is my expertise, which level of vacuum do you need? any constraint on the modelling method? send more details if interested.

Hello, I am pleasure with your job as detailed. Thank you for the job posting. It’s a pleasure to meet you. I’d really like to work with you on this one if possible! I do have a couple of questions, but first I’d like to make you an offer and some background so you can check my work out. I have been developing kind of project within 4+ years so I’m fluent experience to handle project. You’ll get all the expected stuff like a great professional service and a fast turnaround, at a bit less, and I get a bit more exposure. If the above offer sounds like something you would be interested in, I’d love to hear from you. Best regards, Adebayo

cumo I am an aerospace engineer with a master degree. Highly interested on engineering programming and designing. I worked on solidworks catia and autodesk for a long time also used matlab and python over 5 years. I used ansys fluent over 3 years. My professions is aerodynamic,structutal and thermal optimization. I am a member of asia pacific space cooperation organization. As I am an aerospace engineer with aeronautics background mechanics and fluids are my expertize area, I can help you with this project. Regards...

If you are looking for trusted freelancer who can complete the project after accepting it, then you can give us one chance to prove it to you. Check the below Skills. Artificial Intelligence Services : ------------------------------------------------- Modules - Sklearn,Numpy,Pandas, Matplotlib, Opencv, Keras , Tensorflow, Pytorch, Cafee Languages - Python, C++, Matlab => Data Science - Data Munging / Preprocessing, Feature Selection, Data Analysis, Model Building, Model Optimization, Model Deployment => Machine Learning / Deep Learning - SVM,Random Forest, Decision tree , XGBoost, Genetic Algorithm, Neural Network. Architechture - ANN, RNN,GRU,LSTM,BiLSTM,Encoder-Decoder,GAN, Q-Learning (Reinforcement Learning) => Computer Vision - Custom Object Detection, Pose Estimation , Age - Gender Prediction, Style Transfer, GAN In-Painting, Custom OpenCV Detection Models. Computer Vision Architechture - CNN,RCNN, Fast RCNN , FASTER RCNN, Mask-RCNN , YOLOv1, YOLOv3, ResNet, MobileNet much more. Thanks for taking time to read our profile. You can let us know what are planning to develop. We can help you acheive the target.

cumo. Hello, Aslam-o-Alikum. Dear Employer. Greetings of the day, I have studied your Project description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, CFD & FEA simulation, design analysis and manufacturing of sheet metal and structural assemblies. To brief about me: I am mechanical design engineer by profession and graduate in mechanical engineering with 5+ years professional Experience. ✫✫Main Skill✫✫ ☑️Machine design & manufacturing ☑️3D modelling ☑️Mechanical Engineering ☑️Product design ☑️FEA & CFD Analysis ☑️Structural design & Analysis ☑️Reverse Engineering ☑️Concept Development ☑️MS Project management ☑️Project Development ✫Design Tool Skill✫ ☑️Solidworks ☑️ANSYS ☑️Fusion 360 ☑️CATIA ☑️PTC-CREO ☑️AUTOCAD ☑️SIEMENS Star CCM+ ☑️ANSA☑️AUTOCAD ☑️INVENTOR ☑️MATLAB As I have professional experience for these type of projects and very confident to complete any project related to mechanical engineering field. My bid is negotiable and it depends on the required deliverable. Looking forward to hear from you & feel free to contact me Thanks & regards

I have a PhD in Fluid Mechanics from the University of Toronto and am well versed in all computational and analytical software. And I have friends who have phd in electrical and civil engineering and computers, and we will help you as a group. Dominant person - catia - Inventor Dynamic analysis with Adams- Static analysis with abaqus and ansys *** Special design of hydraulic, pneumatic and hydraulic circuits 3D -autocad- solidworks -editvideo - and Photoshop Numerical calculations with Matlabe Familiarity with the appropriate element Optimizing and providing industrial advice on mechanisms We hope to be able to cooperate sincerely and professionally with dear friends. Thank you very much

Hello Good day! My name is Nicklyn Q Oyan Degree Holder of BS BS HRDM with a experienced as a Account Manager in forex broker and talent manager of social media application competitively working as subject matter expert in telecommunication company and advanced skills in customer service with expert in English communication skills.

Dear Sir / Maam I am an Expert for the Engineering, Matlab and Mathematica, Mechanical Engineering, Mathematics, Computational Fluid Dynamics. I will do this job very carefully and without any mistakes. I am an Electrical Engineer so I can do this job very easily and 100% correct & accurate.

I am a mechanical engineer working on CAD, ANSYS, MATLAB and 3D printer apart from the conceptual knowledge. I have worked on projects using ANSYS Fluent (CFD tool). And one of them was quite similar to what you have described your project. Just instead of fluent, I have used ANSYS CFX but I could complete that project using Fluent also. You can see the project images in my portfolio by the name particle flow analysis. I can use other CFD simulation softwarte also for your project. I have understood your project and I am very confident to deliver the accurate results of it. Please check my portfolio form this link to view my CFD projects https://www.freelancer.in/u/ruhulaminkagdi