I need to design a 3 button condition using PIC16F628A. This circuit will work as a logic condition, they will have 3 Push buttons connected to this MCU,
The low Level button will trigger an output called LOW of the MCU, This output will stay High (on),
There is a second button for the MEDIUM Level and if it pressed it will make another output for the MEDIUM turn high (on) and make the LOW output turn (off).
There is a last button called HIGH Level and if it is pressed it will make the LOW OUTPUT and the MEDIUM OUTPUT TURN (off). This HIGH LEVEL will stay (on) only.
Conditions: Press LOW BUTTON, output: LOW (ON), MEDIUM (OFF) and HIGH (OFF).
Press MEDIUM BUTTON, output: LOW (OFF), MEDIUM (ON) and HIGH (OFF).
Press HIGH BUTTON, output: LOW (OFF), MEDIUM (OFF) and HIGH (ON).
Is this this a simple project?
This is the simplest program that I could write in case if you offer the job to me. Will do it in an hour and send you the HEX file for the MCU. Will supply you the source codes too which may have only few lines of codes. Thanks
Hello,
I am Anthony and I am an Electronic Engineer who have five year experience in circuit designing and firmware developing. I am specialized in embedded system control and I am very familiar with popular embedded chips like Atmel(arduino),PIC,MSP. I have very good feedbacks from my previous employers and I am keenly waiting to work on your project too. Please visit link below to see the reviews on my work.
https://www.freelancer.com/u/Anthony989.html
I am ready to start work on your project and I can complete it with in given time and budget. During the time towards completion of the project you will be getting continuous updates regarding the project.
Please contact me if you are intending to hire me. Thank you
Anthony
hi there, i am an electrical engineer. i have done many projects using pic16f628a and i am very fimiliar with this controller. i can help you with this project.
Hi,
I have 14 year experience in electronics, micro-controllers and system designing, i am quite confident that I can take your project. Following shall be the expected milestones:
1. Specification requirement document.
2. Schematics using Altium
3. Simulation of code and electronics (Where ever possible)
4. Software delivery.
About my self , you can review my profile and my clients comments.
Best Regards.
I have made the project ....
tell me how to send you just for a good review.....
Please open chat window to discuss further..
=========================================================================
i ll desgin this one using microbasic or assembly, and test it using Proteus then send it to you, if you increase the bids to 65$ i ll test it using hardware and send you video
Why don't you do this yourself? What's the trick?
I have MPLAB X and Proteus installed, so I can start work as soon as I get home from work (in about 5 hours).
Take a look at my profile, I just finished a bit more complex PIC project and got an excellent review.
Let me know if the push-buttons are active high or active low.
Let me know your desired pin assignment.
May be best if you gave me a schematic, if you have one.
What happens if multiple buttons are pressed simultaneously?
Hi I am an Electrical Engineer with specialty in Embedded Systems design. I can write the C code for this project. If you want a circuit diagram with it, I can provide that as well. Looking forward to hear from you.
Regards
Hello, I am professional prototype engineer with 6 years experience in big automotive company. I can send you the code to test it on your device and if it works you will give me 10 bucks. Looking forward to working you!
We are a company made by three Mechtronic & Control Engineers.
we have already worked on the several projects(See profile).
Wish you good luck.
Regards
Team Dexterous
I am an engineer and expert in micro controller programming. I understand your project. I have sound knowledge experience of micro controller programming.
I understand the high and low condition of output but I didn't get the idea of medium output. discuss with the details of project. I can deliver this as soon as possible. Looking forward to it.
I have been working with the Controllers for the past 4 years and this project is very simple to implement.
Hope to get the project soon for my expertise
Hi,
I am electrical engineer and I have excellent skills in micro-controller programming. I can start this project right now and complete it today.
Thanks,
Its simple to program. Three digital inputs and three digital outputs required. Using pull ups on the input, we make the them active low. When the HIGH/MED/LOW input sees a low it will turn the corresponding output ON, it will remain ON till there is a change in button press. I have a passion for the microcontroller and with extensive experience. Previous jobs had me designing test equipment with the pic micro and interfacing various modules to it. Running a 4X3 keypad on 7 lines using the multiplexing technique.
