READ CAREFULLY
* THE MILESTONE WILL BE RELEASED WHEN IT IS PROVEN AND THE SYSTEM IS WORKING
* MAXIMUM WORK VALUE $60USD.
* ONLY I NEED THE CODE WORKING
* MAXIMUM 4 DAYS TO COMPLETE THE PROJECT.
* PROGRAMMING MUST BE WITH THE 16F628A MICROCONTROLLER, USING MIKRO C PRO FOR PIC
DESCRIPTION
The microcontroller will be able to copy 10 different signals (IR) from remote controls (Air conditioning, TV, sound system, etc). The reading process to copy the infrared signal will be as follows:
When it is received by means of UART "T0" (ASCII FORMAT), the signal coming from the remote control 1 will be copied and recorded.
When it is received by means of UART "T1" (ASCII FORMAT), the signal coming from the remote control 2 will be copied and recorded.
All of the above until completing "T9" from the remote control 10.
To emit the copied infrared signal, it will be as follows:
When received via UART "L0" (ASCII FORMAT), the copied (saved) signal from remote control 1 will be broadcast by infrared.
When it is received by means of UART "L1" (ASCII FORMAT), the copied (saved) signal of the remote control 2 will be broadcast by infrared.
All of the above until completing "L9" with remote control 10.
Note that infrared signals from remote controls have a carrier frequency between 30-40kHz.
See the illustrative figure that I went up.
How r u?Buddy,,Its easy, I also used to did the same project with arduino and mini mp3 remote control. u will feel brotherhood................I will send u a video............