Raspberry Pi Jobs

need to connect a impinj rfid reader to a PI and trigger a Gpo on unique tag ids even if it reads 100 tags i need it to trigger the relay 100 times all program files for reader connection and sample available need it done asap

I have some existing Python code that is used to capture images on a hardware device and process the information to provide results of the image analysis from an algorithm. I have some images taken on camera that I need to process using the same algorithm but not on the hardware device, so I need someone to modify the code and give me the output of the analysis algorithm instead (to simulate the d...

We are looking for a freelancer with hands-on experience on QT embedded software development. As the first stage of the project we want to see a demo firmware made. We would prefer to use Raspberry Pi for our development. When we switch ON the unit, a logo animation will be played on boot up. Followed by the following buttons shown on the left side of the screen: * TEST 1 * TEST 2 * TEST 3 * TE...

I need a teammate/ teammates for my Smart Home products company. I have a good business model which is scalable and highly effective (apperciaapp by top management leaders). The required skills are as follows: Arduino, controllers and microcontrollers programming, Raspberry Pi, Android Development, Android UX development, Web development, Web UX development, Internet of Things, Server applications...

We are looking for a freelancer with hands-on experience on QT embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital Sens...

We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. PLEASE NOTE: The look and feel of the touch screen is very important for our project. We are looking for similar effects in the touch screen as given in the video below: (Check from 2:40 to 3:20) [ログインしてURLを表示] Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3...

Need to add video transcoding into sample application [ログインしてURLを表示] I.e. need to add splitter and video_encode components. Input - raw H264 video file (recorded with raspivid). Dispay decoded video (already done in sample source file) Output - send to sdout raw H264 video stream resized and with lower bitrate. Ffmpeg, libav or any other libs not allowed, only RPI standard VC libs! I expecting ...

Please Read Carefully the description before making any Bid. Wanted, an expert knowledge of Raspberry Pi (Embedded Linux C++ App) The app shall be: - Coded in C++ (Visual Studio 19 for LINUX ARM) / Python can be used but should be justified first - Powerful modular architecture to be provided - Commented Clean code to be provided - Send Queries to GET/SET data from/to MySQL Database tables Two ...

I need to compile a linux operating system with yocto. Send more information by message.

We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. PLEASE NOTE: The look and feel of the touch screen is very important for our project. We are looking for similar effects in the touch screen as given in the video below: (Check from 2:40 to 3:20) [ログインしてURLを表示] Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3...

I want full guide to make Rubiks Cube Robot Solver with rasberry pi, camera scanning the colors of rubiks cube.

Its an easy task project. An LED display of size 1ft by width and 2.5 inch by height (strip like) should be induced by software. The display should be able to view advertisements and images/videos. There should be made use of raspberrypi device to make changes in the display strip connected to it(cloud can be used). All the changes to be made on the devices should be remote changes through any saa...

IOT Trainer Required for providing Online training on weekends (30 Hours Training)

Hi. I have Toradex TK1 board. I need Compile embedded linux OS for my application. I can tell you the libraries that my app uses.

REQUIRED SKILLS: html5 angularjs/[ログインしてURLを表示] javascript delphi 10.2 Tokio / freepascal sql firebird raspbian / linux websocket windows server / IIS 10 PATCH THE USER CONTROL PANEL - WINDOWS WATCHGUARD add a watchguard on a windows 10 application UPLOAD POPUP IMAGE 1 - .json image upload show a popup that disappear only after that the upload is ended when saving the .json image in 2 section...

Make GUI with Python for Sync time IMU GPS and Point Cloud Lidar from BAG file ROS.

The main goal of unobtrusive sensing is to enable continuous monitoring of the human body's physical activities and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi ...

The main goal of unobtrusive sensing is to enable continuous monitoring of the human body's physical activities and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi ...

The main goal of unobtrusive sensing is to enable continuous monitoring of the human body's physical activities and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi ...

The project is to recognize car plates using openALPR and control opening of car parks gate, in the attachment you can find the project flow to import to your node-red and understand how it works. I need you to rewrite the same project in python.

I built the circuit attached in the picture. the whole circuit works on python code. the sensor was working BUT the LCD screen has error in the code. all I want is correcting the error in the code to run LCD

Proyecto sencillo en el que necesito que desarrollen una aplicación con la cual pueda ver el valor de un sensor de Vibración industrial con cualquier dispositivo tipo raspberry o Siemens 2040... No sé qué sensor usar, debería ser industrial y deberíamos medir en g o en mm/s2. Saludos,

We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog input/output (To control an external PCBA) 5)...

We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digita...

We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digita...

necesito que los programa se activen desde que encienda la raspberry pi 3, que corran automaticamente desde que se conecte a energía eléctrica

I'm looking for a linux expert with the ability to implement automation and high level of security into a custom OS. Background. We have a kiosk system that currently operates using two computing devices. 1. X86 running a custom kiosk OS that is dedicated to controlling the user interface. Included software stack on this machine is Chrome, Guacamole (VNC) served up with an apache/tomcat ser...

I want to make a heads-up-display from a transparent OLED screen. I want to drive the graphics of the screen with a raspberry pi. The final deliverable is a driver (device overlay) for the Raspbian OS as well as any documentation and instructions need to use the driver your write. I will be testing the driver to ensure it works.

I am looking to use a respberry pi to read coins and notes going past a camera. The currency will be from different nations so would need to be able to recognise many different coins and notes.

Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital Sensors When user click on each button in touch...

Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital Sensors When user click on each button in touch...

Project requirement include the following: ***** Selecting a ready to use development board for testing purpose. ****** Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output (To control an external PCBA) 5) 2 Digital Sensors When user click on each button in touch...

Looking for somebody integrate Raspberry pi with Electric equipment.

This Project is for Engineers/Developers in INDIA ONLY only, as we may need to send & receive parts. Project Details in attached pdf, which will be changed, if required by our discussions, to be the final project brief. Amendments:- 22/02/2019: Project Brief amended. Point 6.2 added. Latest File: "Home Automation v. [ログインしてURLを表示]" uploaded. Ignore any earlier files.