The objective of this project is to create a 3D character using Blender software. The character is a chocolate drop with arms but no legs (Should be the same as the reference). The project encompasses modeling, rigging, and skinning phases. Sliders will...visually appealing and consistent with the concept. 2.- Rigging: Develop an internal skeleton for the character to enable animation. Establish control points for the arms and the body to facilitate movement and manipulation. 3.- Skinning: Ensure that the skinning process results in natural-looking deformations during animation. Deliverables: Final project file in Blender format. Also FBX and DAE. Timeline: The project is expected to be completed within one week, allowing sufficient time for each phase of work and any necessary ...
I need somebody to build me a venue in sketchup, no textures, just simple 3d modeling, without plants, only the facades. I will provide photos and a base SketchUp file with the 2d plan already drawn at scale so you can build up from there. I just need the 3 facades surrounding the patio and it does not need to be super accurate. Easy modeling, you can model it in any software you like if you ...sketchup, no textures, just simple 3d modeling, without plants, only the facades. I will provide photos and a base SketchUp file with the 2d plan already drawn at scale so you can build up from there. I just need the 3 facades surrounding the patio and it does not need to be super accurate. Easy modeling, you can model it in any software you like if you can later import it into sketchup through c...
...crystals emerging from a stone. Technical Requirements: 1. Low Poly Count: The object should have a minimal impact on performance, not exceeding 2 prims (primitives) in Second Life. 2. Simple Texturing: Simple textures are required to enhance the appearance of both the crystals and the stone. 3. Second Life Compatibility: The final file must be exported in a format compatible with Second Life (COLLADA or other suitable format). 4. Aesthetic Details: The design should be visually appealing, realistically representing crystals emerging from a stone. Expected Deliverables: 1. Blender file (.blend) of the final 3D model. 2. Textures used in the project. 3. Exported file in the appropriate format for Second Life. Additional Notes: • Specific details about the desire...
I am looking for someone to create 3D renderings of packaging supplies that will be photorealistic and look almost exactly like the actual products. I have a general idea of what I want, but need assistance with more detailed specifications. The final renderings need to be compatible with DAE import into ESKO. If you are skilled in producing 3D renderings with a photorealistic level of detail, and have experience in working with packaging supplies and 3D model files, then I would love to work with you. I am open to suggestions and look forward to creating high-quality renderings. Examples of bottles are attached. I have cad specification sheets i can send out. we can start with 1 bottle and see how it goes.
I'm looking for an experienced 3D artist to create a low poly model of a village environment based on a concept given by my company. The Revit file is already created for this project, and the project's objective is to convert it into an OBJ, STL or so 3D ...village environment based on a concept given by my company. The Revit file is already created for this project, and the project's objective is to convert it into an OBJ, STL or so 3D art file. The size of the environment needs to be from 2400 m2. As such, the 3D artist should have experience working with low poly 3D art production as well as experience using OBJ, FBX, rhino, blender, Z brush or Collada formats. Successful completion of this job will demonstrate the candidate's ability to effectively create 3D...
...We will consider ONLY 1 Floor Options. Please Look at the ACTUAL File attached. The Property is about 35 meters Wide . The house should go in the BLUE / Aqua area of attached photo . I will need a few different file types after acceptance of design so I can import into Live Home 3D Software Here are the file types I would like AFTER the project is Awarded : 3D Studio (. 3ds) Collada (. dae) Google Earth KMZ. Autodesk FBX (. fbx) Wavefront OBJ (. obj) Sweet Home 3D (. sh3d) Ideal Skills and Experience: - Proficiency in traditional house design and architecture. - Experience in creating custom floor plans. - Strong attention to detail and ability to incorporate client preferences. - Knowledge of building codes and regulations. If you have a portfolio show...
modellieren einer 3d Figur namens Dino. 3d Modell wird in C4d / dae /3ds / fbx /skp benötigt
I have files from a previous "architect" who got disabling sick and could not continue with this task. He left .dae and .pln files, but i don't know for which software using them. I need help with designing mostly factory interior and people. I'm super busy with other stuff so this job will develop in burst now and then when i have time to spend on it. Im on a tight budget, so a low hourly fee is apricated.
Description: Hello talented designers, I am seeking a professional with proficiency in 3D design to recreate a perfume bottle based on the given references. The design should match the original...Reference Images: :content/assets/ accepted file formats: blend, 3ds, obj, fbx, dae and jpeg, jpg, png Please ensure that you can provide high-quality renderings and have prior experience with similar projects. I am looking forward to seeing your portfolios and working with the best!
Hello, I'm looking for somebody who can help me create a 3D drawing of a cream jar with SolidWorks. Specifically, I'm looking for a drawing file with the extension .dae, and I do not need to simulate motion in the model. Additionally, the drawing should include the thread of the Jar lid. If you think you can help me out with this project, please contact me. Thank you!
Photorealistic Rendering of twin tower building Skills and Experience: - Proficiency in photorealistic rendering techniques - Strong knowledge of 2D and 3D rendering - Experience in creating high-quality image files Project Description: - I am looking for a freelancer who can create a photorealistic rendering of my project. - The project requires photo-realistic rendering, ensuring th...final image closely resembles the actual project. - The desired output format for the rendering is an image file and AI and PSD. - The freelancer should have experience in creating high-quality image files and should be proficient in photorealistic rendering techniques. - Knowledge of 2D and 3D rendering is also required to accurately represent the project. Source files of the project are PLA and DAE...
I have a .DAE CAD file that I am looking to convert to a series of solid bodies in a .STP format that can ultimately be successfully imported into SolidWorks. The file is at I am only looking for the surgical table (circled) to be converted to solid bodies. I am a SolidWorks user and don't have proper tools to be able to import and modify .DAE files, so I am hoping this is an easy job for someone else with the right tools.
[5 pts.] Display an animated 3D Collada model using SceneKit. You may not use the "Ship" model that comes with the Xcode project template for SceneKit games. The model does not need to be your own original creation, but if you use a model created by someone else, you must provide citation for the author and a link to any applicable license for the model. The citation(s) and license information must be provided in a README file submitted with your project. Animation may consist of repositioning the model, rotating the model, scaling the model, or changing any other animatable property of SCNNode instances over time. [5 pts.] Demonstrate user interaction with an animated 3D model. Some aspect of the model or animation must change based on user input. Explain the necessary u...
We are looking for a freelancer who can perform 3D architecture model optimization on existing CAD files. The main task will be mesh optimization, and we are hoping to find a skilled freelancer who can quickly and efficiently make the necessary changes. The specific tasks that need to be completed on the model include the following: - Convert the source DWG or DAE file into an optimized FBX file with a quadrangulated topology. - Check for any errors or issues in the model and fix them as needed. - Optimize the polygon count to ensure it is suitable for use in the Unity game engine without causing performance issues. - Apply a consistent naming convention for polygon element grouping to create an organized hierarchy. - Apply proportional UV mapping to each polygon element bas...
The research needs only review and working on certain notes. The objectives of the research are: • To filter and remove noise while preserving important features for improving the quality of low-resolution images by using novel filtering techniques. • To extract the most important facial features from the low-resolution images using Deep Autoencoder (DAE) for improved classification accuracy. • To design a low-resolution facial recognition model using a deep learning classifier NO AGENT MESSAGING PLEASE - WON'T RESPOND
Please READ before you apply, thank you! I am looking for someone to create mesh in Second Life. Must have previous experience since SL mesh is pretty messed up compared to other games. I commissioned a job, but it is not usable in Second Life due to the high polys. If you have experience in this please apply! I need glowing lights and detail in the wood as show. A friend tried to sa...for someone to create mesh in Second Life. Must have previous experience since SL mesh is pretty messed up compared to other games. I commissioned a job, but it is not usable in Second Life due to the high polys. If you have experience in this please apply! I need glowing lights and detail in the wood as show. A friend tried to save this for me, but she could not clean it up much. I would need dae...
Se need a modelling of an historical building modelling (4 facades of a cloister) based on photos. Se need not an high polygon model but se need the absolute precision, then is suggested to use photogrammetry software. You can use any 3d software you want, se need an obj or fbx or .dae or .3ds or .max We dont need lights or camera or renders
• Good knowledge in Unreal 4/5 with C++ / Blueprints • Exposure to Cloud platforms ( Azure / AWS/ Google Cloud Platform) as well as Dev Ops. • Exp. in any of the following: VR / WebVR / AR / XR development, 3D files formats (such as FBX, gITF, COLLADA/DAE, OBJ) or character animation (avatar systems, and human representation) • Exp. in any other 3D engines like unity is a bonus • Expertise troubleshooting skills and the ability to creatively problem solve • Exp. in implementation for real-time 3D applications • Exp. in developing 3D models (scenes, textures, materials, and animation), developing software within the game development process or experience building interactive real-time 3D products
Hi Dae I. could I hire you to do drawings from two photos?
...immersive VR experience. I have 3d CAD model which I can supply in a variety of formats as required. I will also supply a 2d image(s) showing the general finishes and materials used which need to be replicated in the 3d model. I am expecting/hoping that these will be extrapolated and applied around the model where they are not necessarily defined or visible in 2d. As output, I am looking for a .dae, .3ds or .blender file that includes all the textures and can be imported into SketchFab. I have already completed a low-quality version of the residential property, but I am looking to increase the quality of output closer to photo-realistic, especially for the yacht project. I have attached screenshots of what I have achieved to date to indicate the level of detail that will be in...
I am looking for a Virtual Reality content creator for the online virtual world Second Life. Contents such as mesh clothing and mesh houses or buildings. Qualifications: - Must know Sketchup or Blender and rigging with Avastar. - Must have an experience on clothing creation particularly using Maitreya Body Dev Kit. - Ca...content creator for the online virtual world Second Life. Contents such as mesh clothing and mesh houses or buildings. Qualifications: - Must know Sketchup or Blender and rigging with Avastar. - Must have an experience on clothing creation particularly using Maitreya Body Dev Kit. - Can also create simple mesh buildings and furniture using any 3D program but can export completed projects in the the Collada (Avastar) format. Please quote me your fee per project. ...
- configure PowerEdge MX7000 Enclosure - install Esxi 7 on 4X PowerEdge MX750C Servers and Vcenter as well. - configure required Esxi virtual switches and file systems on unity storage. - configure Unity 380 DPE 25 x 2.5 Dell FLD RCK and create required VMware vSphere file systems - configure blade Fabric switches and implement any required Qos. - insta...the tasks. below is list of material: PowerEdge MX7000 Enclosure 4X PowerEdge MX750C Dell EMC MX9116N 25GbE Fabric Switching Engine, 12x QDD28, 2x Q28, 2 x Q28/32GFC RecoverPoint for VMs-SWAAA Dell EMC Switch S4128F-ON, 1U, PHY-less, 28 x 10GbE SFP+, 2 x QSFP28, IO to PSU, 2 PSU Dell EMC MX9116N 25GbE Fabric Switching Engine, 12x QDD28, 2x Q28, 2 x Q28/32GFC Unity XT HFA - SWAAA Unity 3U 15x3.5 DAE FLD RCK RecoverPoint for Unity ...
I got lots of (biped//human) bvh files and I need a simple windows desktop program to retarget (convert) these files to (biped//human) mixamo rigs. The program should let me select the bvh file as source and the miamo rig (fbx or dae) as target, also it should ask where to save the converted file. I don´t know what´s easier to code: convert the bvh files to work with the mixamo rigs, or convert the rigs to work with the bvh files. That is up to you!
I got lots of (biped//human) bvh files and I need a simple windows desktop program to retarget (convert) these files to (biped//human) mixamo rigs. The program should let me select the bvh file as source and the miamo rig (fbx or dae) as target, also it should ask where to save the converted file. I don´t know what´s easier to code: convert the bvh files to work with the mixamo rigs, or convert the rigs to work with the bvh files. That is up to you!
Looking for an ARcore developer to add face filters to my existing app. I have the collada files for the filters and the camera is already done. Just need to add filters to the existing camera app. I do have source code. Attached is some screenshots example. One screenshot is the current state of the camera. The second screenshot is the filters we want to add. Note: app is written in Java.
I seeing if you are able to build an iOS application that demonstrates 3D animation and Video using the 3D collada model. In this application I would like to show user interaction with the animated 3D collada model, changing text or video as texture on the animated 3D collada model, display changing text overlaying the model, and show physics involving the model. Please let me know if you are able to do this. Willing to negotiate for price. I have provided an example below of what I am looking for.
I’m looking for someone to create 360degrees 3d brushstrokes to be saved as collada file that I can open and use on sketchup. See images for reference
i have a vision for some food/drinks looking for someone that can work timely manner, weekly work is a option looking for reliable hire that can be paid weekly. its simply some cups i dont feel like its complex, would like to have the meshes game ready with textures applied , if not would like all files obj,dae, or fbx, along with the textures files completed with uv maps that easily match the textures for easy application
I need someone to help me import textured .dae files into metaquest 2 glasses.
I have a 3D -scanned object. There is 2 sides that has to be merged together. Small holes to be filled (4-6). Need a STL or OBJ for 3D printing. I provide 4-6 different scans in STL, OBJ, DAE, USDZ.
Hello, I would like to have scan I took with polycam corrected and turning in to a usable file format. I can supple all of the raw scans from polycam and I can re-measure things as needed REF: "Polycam supports exporting mesh data in .obj, .glb, .fbx, .dae, .stl and .usdz and support exporting point cloud data in .dxf, .ply, .laz, .xyz and .pts. You can also export the raw images used to generate a capture. "
We have a DWG file for a 9 floors building and adjacent compound that needs to be simplifie...check/suggest for best ways to work on the model. We also have landscape models for the internal garden inside main building (1x) as well as areas outside the building (2x). This will be used essentially for terrain modeling and needs to be incorporated in final renders in Lumion. The reworked plans/layers/exports should be compatible with Lumion, and have the following characteristics: -DWG or DAE (collada) or FBX file under 2Go -Facetres might need to be adjusted as in preliminary checks some rounded shapes went bizarre Please note: this project will be under NDA (non-disclosure agreement) and the selected candidate will not be able to use this in his portfolio - sorry, but t...
We need to design a few simple furniture pieces with texters provided and export them .DAE file. We need someone who can do projects in the future as well.
I know that you are probably not going to read this so I made a copy for you to read again. I cannot afford something that does not work. I am using Windows 10, Visual Studio 2022 C++ and OpenGL 3.3 . I use GLEW not GLUT. I need to be able to deform a skeletal mesh within the code and not in th...not GLUT. I need to be able to deform a skeletal mesh within the code and not in the shader. I want to be able to use more than one material. I would just need to have the diffuse texture or a color so I could implement the other textures myself. I can provide a model for you to use and have a shader compiler, a texture program, a camera and initialization code that you could use. I can use .fbx .dae or gltf2 formats. I do not need animations. I could use remarks to be able to help navigate...
I know that you are probably not going to read this so I made a copy for you to read again. I cannot afford something that does not work. I am using Windows 10, Visual Studio 2022 C++ and OpenGL 3.3 . I use GLEW not GLUT. I need to be able to deform a skeletal mesh within the code and no...understand that frustum culling relates to the camera so I would like the camera to work like it has a position in 3D space and has yaw pitch and roll. I want to be able to use more than one material. I would just need to have the diffuse texture or a color so I could implement the other textures myself. I can provide a model for you to use and have a shader compiler that you could use. I can use .fbx .dae or gltf2 formats. I do not need animations. I could use remarks to be able to help navigate ...
...perder ninguna función actual. No debe mermar el funcionamiento ni haber una caída del desempeño mayor al 15% o 20% al encender estas nuevas funciones. El sistema es dinámico, y al agregar las nuevas funciones no debe volverse estático ya que esa es la escencia del sistema. las funciones a realizar: 1 - *creación de un panel y repositorio de objetos (para ingresar y guardar objetos Dae y OBJ , ej mesas sillas, tv, o ambietes completos) al servidor - al agregar un objeto debe incluir sus texutras originales y permitir editar texturas y tamaños, mostar tamaño en mm - debe permitir introducirlos dentro del proyecto abierton y ubicarlo en mm en los ejes X Y Z y rotarlos EN ° X Y Z Al agregar un Objeto e...
need to build a small object in format .dae
Hi, We need a human 3D-character usable as Sketchup or a Collada file version.i The character is a female working at a food assembly line and therefore is equipped with a hair-net and facemask and rubber gloves. See sample pictures. * Usable in Sketchup or/and Collada * Equipped with light protective clothing, a hair-net and facemask and rubber gloves. * Manipulating joints for different positions. We are on a very tight budget. What would it cost to make a new or modify an existing 3D-character to fit our need? Thanks, Peter
Based on our discussions for 6 models with the desired sidewalk layouts, minimal landscaping, etc. to be delivered in PNG, DAE and video with minimal camera movement.
I need some 3D low poly models. Export into obj or dae format. Example of what i need but in lowpoly Please send me message for more details of the project. Regards
Looking for some 3D designer expert to export the 3D animated model for the iOS and Android app : For iOS need to convert the .FBX file into .dae or obj format For Android need to convert the .FBX file into GLB: format Note : While exporting you have to make sure that when export each file its opening fine with and showing the same output as previewing in the 3D Max studio. Source File :
Looking for some 3D designer expert to export the 3D animated model for the iOS and Android app : For iOS need to convert the .FBX file into .dae or obj format For Android need to convert the .FBX file into GLB: format Note : While exporting you have to make sure that when export each file its opening fine with and showing the same output as previewing in the 3D studio max
I need a 3D model of this work parking lot and parking space area created only. I do have a top area view of the parking lot. We can discuss via chat. Format can be either a Sketchup file or .dae file.
i need someone have experince in 3d modeling to create 3d talking face extension dae i can put it in face recognition app
hello i already install arkit in flutter project but now i need someone to create dae files animated 3d shapes with voice and make sure it will run in flutter project like this
Looking for some 3D designer expert to export the 3D animated model for the iOS and Android app : For iOS need to convert the .FBX file into .dae or obj format For Android need to convert the .FBX file into GLB: format Note : While exporting you have to make sure that when export each file its opening fine with and showing the same output as previewing in the 3D Max studio. Source File :
I want to convert 25 .fbx files into .dae files using blender which should be compatible for usage in Scenekit. Earlier we tried using Rhino but the our Application is not able to pick these objects.
Hi! Our team is creating a graphic novel and we have built a 3D model of a fantasy city that we will use to speed up production. This is what it currently looks like: What we would like to do: - general aesthetic improvements. More visually appeal...tellar-dream-737874604cc8452f9d95c9e130163f87 What we would like to do: - general aesthetic improvements. More visually appealing/realistic/etc - realistic rock and cave patterns for the walls. - flowing water - keep file size small by minimizing the amount of textures used in the model - find an easy way for our fans to interact with the model (Sketchfab is preferable) We will send dae, fbx, or obj files when we start working together.
