Find Jobs
Hire Freelancers

Design a machine

$250-750 SGD

クローズ
投稿日: 9年以上前

$250-750 SGD

完了時にお支払い
We require a mechanism design which is able to perform the following in order. How the mechanism works: 1) To be able to accurately dispense viscous fluids from a tank into a bottle in 3 different volumes base on user’s selection – 200ml ,500ml , 1250ml. 2) User will select the volume to dispense, with a display to show the amount that need to be paid to proceed. 3) A payment receptor that is able to accept coins or notes, able to give out change and show the remaining amount that is left unpaid. User to confirm decision to proceed with the dispense of the fluid after the correct amount is inserted. 4) A safety mechanism at the dispensing area to protect the nozzle until the confirmation from the user to proceed is received. A LED backlight to indicate that the user is now able to access the dispense area to place the bottle to be filled. 5) A sensor to be installed to confirm that the bottle is in place. An indication to inform the User that machine will begin to dispense 6) There should be something to hold the bottles in place, and align the bottle opening to the nozzle to prevent spillage. 7) Machine will only dispense when ALL 3 conditions are fulfilled - Correct amount of cash inserted base on user’s selection - Bottle to receive fluid is in the correct position - Bottle opening is aligned with the dispensing nozzle 8) An indication for the User to remove the bottle once it has been filled to the selected amount. Can be linked to criteria #5 9) Dispense area back to locked position (Criteria #4) once the user remove the filled bottle. 10) There must be a back flush function for the nozzle, after the door is closed, fresh water shall be pumped at a relatively high velocity enough to “wash” the nozzle. Deliverables: - Electrical drawings - Control drawings - Schematic drawings - 3D model with dimensions. Ready to be sent for fabrication
プロジェクト ID: 6465930

プロジェクトについて

15個の提案
リモートプロジェクト
アクティブ 9年前

お金を稼ぎたいですか?

Freelancerで入札する利点

予算と期間を設定してください
仕事で報酬を得る
提案をご説明ください
登録して仕事に入札するのは無料です
この仕事に15人のフリーランサーが、平均$791 SGDで入札しています
ユーザーアバター
Hello Sir, i have 9 year experience. i can do any kind of 3d graphics works. i have attached some of my best works in my profile kindly check it .if my work satisfy your needs then pay me and i am sure it will you can check my ratings, that will be a great if you give me a chance to provide you the best work in Freelance at affordable price......Thanks Yasmeen
$833 SGD 10日以内
4.7 (68 レビュー)
6.5
6.5
ユーザーアバター
Professional engineer with 37 years of design experience, I am using SOLIDWORKS for modeling and animation
$526 SGD 10日以内
4.3 (51 レビュー)
5.6
5.6
ユーザーアバター
Dear Sir/Madam I use Autocad, MDT, Inventor, Solidworks, Catia and Abaqus. models for 3d and 2d detail drawing I could and was able to analyze the FEA, motion study, rendering, analyze kinematic and many more to see my work visit the portfolio please send me a message for more information and I will give an example for a project that you created thank you salute Ramdani
$833 SGD 60日以内
4.8 (15 レビュー)
4.6
4.6
ユーザーアバター
Hello. I can do it. .
$850 SGD 10日以内
4.9 (12 レビュー)
4.6
4.6
ユーザーアバター
I see many candidates! I I bet they have no idea of the project! Designers and manufacturers of dosing filling machines worldwide are counted on one hand. - Dispenser - not volume - time, software control time - volume - money - money back - well - washing of the nozzle -Milk I guess - easy What about sorting and telescopic lip bottle There are three types, but the cap?!?!? Well, now !?
$2,222 SGD 40日以内
4.6 (1 レビュー)
4.2
4.2
ユーザーアバター
Hi, The total Estimated cost that I have mentioned is not final cost. First let's discuss about your project then we can finalize the cost. I am having 2 years of experience in mechanical design in National Wind Tunnel Facility, IIT Kanpur. I am having sound experience in working with CATIA, AUTOCAD, ANSYS, ABAQUS, MATLAB and other softwares needed for design. I have designed number of aerospace models for NWTF, IIT Kanpur for wind tunnel testing. What I can provide you better are: 3D modeling, drafting Surface modeling Simulation of the design Structural and Thermal Analysis Basic design calculations I believe, I can help you in this project and can provide a quality work as per your expectations. Please go through my design portfolio and profile. If you find my credentials matching with your requirement, lets discuss about all the aspects of this project. Thanks & Regards, Om Prakash Yadav
$777 SGD 20日以内
4.7 (16 レビュー)
3.8
3.8
ユーザーアバター
Hello I'm ready to take your project and starting right now we can talk about the project Thank you
$526 SGD 10日以内
5.0 (3 レビュー)
3.2
3.2
ユーザーアバター
A proposal has not yet been provided
$388 SGD 15日以内
5.0 (3 レビュー)
2.0
2.0
ユーザーアバター
Hello! I have experience programming in C / C + + for almost 20 years. Devices based on Arduino, I'm doing more than 3 years. I have experience making "smart house" on the Arduino. More, I have experience in: - making hydroponics installations on Arduino - the control system with LED lights for plants light - equipment for the reality-show "Treasure Rom" - Access Control Systems for printing equipment with RFID I can suggest this device to make based on Arduino. I am ready to write a program for Arduino and provide a complete description of the device.
$800 SGD 30日以内
0.0 (0 レビュー)
0.0
0.0
ユーザーアバター
Hi, I am fully understand your requirements and ready start for the discussion with your. Please let me know if you are interested to working with me. Feel tree to check my my profile pages for your reference. Cheers jaenal
$650 SGD 20日以内
0.0 (0 レビュー)
0.0
0.0
ユーザーアバター
A proposal has not yet been provided
$722 SGD 15日以内
0.0 (0 レビュー)
0.0
0.0
ユーザーアバター
Dear customer, do you need just the software or need a prototype also? I can develop a PC software with a detailed description of hardware you need. I have developed laboratory instruments wich include high-presicion liquid handle. If you need a prototype it can be done by our team in Barcelona - Spain and delivered to you via currier, but the price will not be the same. I will look forward for your order. Best regards, Gustavo Valcarcel
$555 SGD 3日以内
0.0 (0 レビュー)
0.0
0.0
ユーザーアバター
as i have done electronics and communication. As well as I've done same project with the pharmaceutical company. I am quite aware with this project. I request you to let me know about how and where to ship the hardware.
$555 SGD 20日以内
0.0 (0 レビュー)
0.0
0.0
ユーザーアバター
Hi there. My name is Keith and I am a professional electrical engineer here in the US. I graduated Vanderbilt University with a BS in mechanical engineering. I now work solely as a contracting designer and freelancer. I am knowledgable in all sorts of microcontroller implementations, circuit design, sensors, mechanical systems, wireless and more. I am hardworking and understand that when all is said and done, my clients need a product that works well and done direct to your specifications. I invite you to have a look at my profile resume and portfolio. Thank you for your consideration! - Keith B
$526 SGD 10日以内
0.0 (0 レビュー)
4.8
4.8

クライアントについて

SINGAPOREのフラグ
Singapore
0.0
0
メンバー登録日:8月 3, 2014

クライアント確認

ありがとうございます!無料クレジットを受け取るリンクをメールしました。
メールを送信中に問題が発生しました。もう一度お試しください。
登録ユーザー 投稿された仕事の合計
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
プレビューを読み込み中
位置情報へのアクセスが許可されました。
あなたのログインセッションの有効期限がきれ、ログアウトされました。もう一度ログインしてください。