Target Hardware is STM32F103ZET6 + 7" TFT SSD1963 (FSMC interface). + NAND FLASH + SD card interface.
Ports Used. UART1 in RS-232 Mode, UART2 in RS-485 Mode. I/O is not at all implemented.
.................******************...................*******************
The required functions are,
1. UART1 Communication through RS232 with a Delta DVP PLC (Modbus ASCII Mode)
2. UART2 Communication through RS485 with an external device (Modbus RTU Mode)
3. FSMC with 7" TFT SSD1963 with resistive touch panel. We will supply all required images in jpg
4. I need Iconic menu buttons, background images (images should be stored in the SD card)
5. UI will have at least 8 screens.
I will give you the following
1. Schematic diagram of the HW.
2. Set of images to construct the Screen
Freelancer requirement
1. Hardware STM32F103ZET6 + 4.3" or 7" TFT SSD1963 (FSMC interface) or equivalent.
2. Knowledge about MODBUS Master RTU and ASCII Protocol
3. emwin, RT-thread, emwin gui builder, or equvalent
Schematic Diagram attached. Bid only after reading all thee description and the schematic diagram assessment.
Project award procedure.
The bidder should understand my needs clearly, and bid with a demo code which should work in my HW. Demo code as flash file is enough.
Those who send a demo code to explain clearly about their work experience will be awarded. We have many project based on this HW.
I have written DO-178B compliant code on STM32F103ze controller. I have used RS232 controller after integrating it with DMA. I have interfaced all the peripherals.I can help you.
I am from bengaluru, India so awarding the project will have advantages of being in the same country.
One more advantage is that I have production level code on the same controller you have mentioned. So the turn up time will be lower and it will have no bugs as that part of the code specially related to modbus RS232, RS485 already tested.
Feel free to ask for further explanation/doubts.
Hello,
We are a team of embedded hardware and software professionals with experience in circuit design, schematic entry and PCB layout.
We do complete product design, development and manufacture.
Would like to know more about the project.
Looking forward to work on this project.
Please feel free to contact us for any further discussions.
Thanks and Regards
Techoviz