Find Jobs
Hire Freelancers

DSTATCOM allocation and local feeder behavior under nonlinear load Matlab Project

$30-250 USD

クローズ
投稿日: 5年以上前

$30-250 USD

完了時にお支払い
Hi Dear, The information about the research is attached in compressed folder which contains information about feeder (case study) which contain (the map, load graph and excel sheets about resistances and inductance as well as the transformers and the feeder length) the voltage profile is maintained constant (11.2KV from the substation by using OLTC) when the nonlinear load is connected to the feeder the power quality problem(voltage profile ) drops within the acceptable range. Hence the D-STATCOM is used as a compensation device with a specific control strategy based on a PI controller to solve this problem(improve the voltage profile)(11KV/50Hz) So the main objectives of this research work are: 1- model this radial distribution system by Matlab model either by Matlab Simulink or by Matlab code according to the information given about the feeder (11KV/50Hz) 2- Examine the system with connecting nonlinear load without DSTATCOM ( and observe the problem of voltage profile which drops under its acceptable standard level) 3- Examine DSTATCOM with specific control strategy base on PI controller (tuning PI controller using Particle Swarm Optimization PSO) 4- compare the results with and without using DSTATCOM with specific control strategy mention in (3) in order to show the importance of using DSTATCOM for improving voltage profile in distribution system which tuned by PSO. 5- Study the DSTATCOM allocation (best location of DSTATCOM by using optimization method (PSO)) major notes: 1- I selected different reference papers to cover the main objective of the research. If you know there is a need for other papers used as references from your literature and your experience please use them and inform me about them. 2- the attached folder contain technical information about feeder (X) if you need other information about the feeder please contact me by email or by Whatsup. ............................................................................... FURTHER EXPLANATION OF REQUIRED WORK ............................................................................... The following modifications should be done before the final Project send: 1- The local network with its all specification Parameters ( Source 11KV/50Hz) and Transmission lines data ( as given in Excell sheets) should be included as the case study. 2- Nonlinear load should be designed perfectly to create Power quality problem especially voltage drop on the feeder ( the main objective improve the voltage on the feeder to be with standard acceptable level). 3- add scopes and display to show the waveforms for voltage current and reactive throughout the network 4- monitor the voltage and current as well as reactive power before using DSTATCOM (in order to compression and prove the efficient of DSTATCOM in this network). 5- DSTATCOM model should be designed perfectly using SPWM as control strategy and with appropriate filter design which depends on PI controller tuning. 6- PI controller should be tuned using Practical Swarm Optimization for the value of gain constants (Kp and KI) 7- Observe the results after connecting DSTATCOM with appropriate design mention (5&6) and should prove the voltage profile improvement using DSTATCOM. 8-study DSTATCOM allocation (Best location) depending on PSO technique. 9- study the load flow of the network without using DSTATCOM and with using DSTATCOM and compare the results. Please before send me the project make sure you do all the mentioned above points as is also send a perfect work with all clarifications and explanations as well as audio video to clear all the works in details ( Matlab code, Simulink graphs numerical results ......should be included in the work. Fixed Budget is 100 US $ Please note: the deadline is very important for the research 15/9/2018 note: if you did perfectly then you have a big chance to other works in future. Regards
プロジェクト ID: 17741498

プロジェクトについて

8個の提案
リモートプロジェクト
アクティブ 5年前

お金を稼ぎたいですか?

Freelancerで入札する利点

予算と期間を設定してください
仕事で報酬を得る
提案をご説明ください
登録して仕事に入札するのは無料です
この仕事に8人のフリーランサーが、平均$191 USDで入札しています
ユーザーアバター
Hi, I have worked with D-STATCOM modeling and parameter tuning in MATLAB and I am an expert in Optimization algorithms. I have done one such project in Freelance website too (https://www.freelancer.com/projects/engineering/Improving-Power-System-Quality-Grid/) D-STATCOM is very difficult to model. The first time I did D-STATCOM it took me nearly 6 months to understand it. Now I have the knowledge to help you get your work done faster. I have done several models in which a Simulink model is tuned with an optimization algorithm. And I am an Electrical Engineer working in MATLAB exclusively for power systems for the last 5 years also have published my own paper in Power systems involving Optimization algorithms . Looking forward to discussing with you in chat. With Regards, Anthony
$333 USD 7日以内
5.0 (14 レビュー)
4.8
4.8
ユーザーアバター
Expert in Matlab, Simulink, Power System, Signal Processing, Image Processing Artificial Intelligence. Excellent in Electrical Engg. Algorithms, Power system, power electronics & drives. PV generation, Wind generation, Hybrid, MPPT, PSO, ACO, ABC, MPC, BFO, Game Theory etc Already finished similar work for nonlinear load. I can do this project work. Pls send a msg to discuss further.
$155 USD 3日以内
4.9 (10 レビュー)
3.9
3.9
ユーザーアバター
Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with Algorithm, Electrical Engineering, Engineering, Matlab and Mathematica, Telecommunications Engineering, I have made many similar projects, so I am sure I can do a good work for you. Good communication with my clients it is a top priority for me. If you have any doubt or want to see more of my work I’ll be here. Contact me for more info.
$200 USD 3日以内
5.0 (3 レビュー)
3.5
3.5
ユーザーアバター
Hello, I can do your project 100%. I can do this project. I am working on many field wireless technologies such as Cognitive radio, WSN, MANET, VANET, Ad-Hoc networks, LTE, Standard Protocol, wireless sensor network, routing protocol and many more. I am a certified professional of CISCO, OPNET, MATLAB and NS2 simulator. I am expert in Network Simulator (NS2/3), LTESIM, LABVIEW, Oment++ and OPNET. I have done no of the project on Network Simulator (NS2/3), LTESIM, Oment++, OPNET, PYTHON, and OPENCV. I have done many projects based on Image Processing, Speech & Pattern reorganization, Signal Processing, wireless sensor network, routing protocol, electrical & electronics engineering, communication system and implement mathematical Algorithm in C/C++ and Matlab language. I am expert in FPGA, VHDL, and Verilog in system programming as well as antenna design, antenna simulation on the ANSYS HFSS, CST.
$155 USD 3日以内
5.0 (7 レビュー)
3.5
3.5
ユーザーアバター
Dear Hiring Manager, I have worked with various Electrical & Electronic support companies as an Engineer which develop my skills in awarding with excellent, effective & efficient results as per my jobs responsibility. I am in search of new and challenging responsibilities in order to keep on my career path and desire to set up an excellent working relationship to all of the employers. I am full time freelancer of Electrical & Electronic Circuit Designing & Simulation, PCB Designing, Consultancy of different types of Electrical & Electronic Problem. I am ready to give hardworking, reliability, flexibility & honesty. I can work with minimal supervision, communicate & give updates on the status of my work output. I am always determined to deliver projects to freelancer clients before meeting the dead line with 100% satisfaction & loyalty. Technical Skills Multisim Eagle MATLAB & so on Thanks & Regards
$78 USD 3日以内
5.0 (3 レビュー)
2.8
2.8
ユーザーアバター
Hello I am new here in freelancer but i am having an experience of 5 years. I will do this job best and will provide you the best without errors and 100% output results
$155 USD 3日以内
0.0 (0 レビュー)
0.0
0.0
ユーザーアバター
hi I have viewed your project requirement. we have 9 years of experience in matlab projects and we have experienced scholars in matlab who easily make out the work with top quality based on your needs. kindly contact me for further discussion. let's build success together. thanks
$250 USD 5日以内
0.0 (0 レビュー)
0.0
0.0
ユーザーアバター
I HAVE 10 YEARS OF EXPERTISE IN DEVELOPING MATLAB PROJECTS IN FIELD OF ELECTRICAL ENGINEERING WITH IN TIME COMPLETION AND CONCEPTUAL EXPLANATION MY MOTO
$200 USD 6日以内
0.0 (0 レビュー)
0.0
0.0

クライアントについて

PAKISTANのフラグ
Sahiwal, Pakistan
5.0
7
お支払い方法確認済み
メンバー登録日:3月 2, 2011

クライアント確認

ありがとうございます!無料クレジットを受け取るリンクをメールしました。
メールを送信中に問題が発生しました。もう一度お試しください。
登録ユーザー 投稿された仕事の合計
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
プレビューを読み込み中
位置情報へのアクセスが許可されました。
あなたのログインセッションの有効期限がきれ、ログアウトされました。もう一度ログインしてください。