I need someone who is PROFICIENT in Brocade switches. I have (2) Brocade ICX6430 switches to configure. I am very familiar with Cisco but have no experience with brocade.
I need the person applying to be willing and ready to work on this immediately via a remote web session, rather it be TeamViewer or Cisco Webex.
I need hostname configured, enable password, telnet setup, I need vlan 1, vlan 100 and vlan 200 created, IP address assigned to vlan 1 interface. I need all ports to be setup for VoIP which is the vlan 100 and data networks which is vlan 1. Not sure in the Brocade world if that is dual-mode.
Should take the right person less than 30 minutes for these changes.
Port 1/1/24 & possibly port 1/1/23 need to be configured to connect to a second Brocade switch. I will configure the second switch.
In cisco, i would setup a port-channel and trunk these connections to pass all vlans. I need to accomplish this same task but on this Brocade setup.
We have Cisco VoIP today. VoIP traffic is on vlan 100. On Cisco I would do something like this:
switchport trunk native vlan 1
switchport mode trunk
switchport voice vlan 100
mls qos trust dscp
I need to accomplish the above, but on the Brocade switches.