Electrical engineer needed to help polish existing PCB design

終了済み 投稿 3年前 着払い
終了済み

We are a small team of software engineers who are looking to finish the design of a four-layer, medium-current PCB we've been developing in-house. The product is an ESP32-based smart LED controller with an audio-codec on board and is designed to drive several hundred 5v or 12v WS2812b LEDs with audio reactive animations. Our cumulative electrical engineering/PCB design skills have allowed us to create a proof-of-concept, but we're at the point where we don't feel comfortable distributing this product to beta-testers without a proper power design, and a design that plays well with the audio circuitry. The product's power supply is a 60A 5v or 12v power supply, so it can be assumed that the board will be supplied a clean 12v signal.

Specifically, what we're looking for is:

- Proper step down converter for 12v - 5v if 5v LED chipset is used

- High-current power rail design for driving up to 15A at 5v or 12v from the board

- Voltage regulator design that provides 3.3v to main MCU, and a clean 1.8v to audio codec

- A quiet design that does not interfere with amplified line out output

- An audio of the existing voltage regulator choice and MCU power design

- Anything else we may not be thinking of!

A few other features we would like to add, but at this point aren't requirements include:

- Lipo power and charging circuitry

- 1/4" audio input design

- Class D amplifier circuitry

In terms of who we are looking for, we'd like an individual or agency who may be willing to work with us for future revisions, and someone who has experience with audio circuitry is a must given the nature of the board.

We use eagle, and would prefer to stick with eagle since we used it to design our existing PCB. We also would supply existing design files. Given our budget and timeline, we'd prefer to not start from scratch. However since it's such a small board (see screenshot), we wouldn't be opposed if a full board redesign if for whatever reason the existing PCB design's would hinder development.

We were hoping to have the design finished by August, so the timeline is a little tight. That being said, there is no hard set date. We're hoping to begin beta testing mid-fall 2020.

エレクトロニクス PCBレイアウト 電気工学 回路設計 マイクロコントローラ

プロジェクトID: #26976312

プロジェクトについて

35個の提案 リモートプロジェクト アクティブ 3年前

35 人のフリーランサーが、平均$20/時間で、この仕事に入札しています。

sagradoamicus

Hi I am experienced electroncis engineer with more than 15 years of experience. I have read the details and would like to know more about the design. Please get in touch to discuss it further Regards

$30 USD / 時間
(274件のレビュー)
8.0
shahbaz1980

Hi There, I am experienced electronics engineer having 15 years of R&D experience in electronics industry. i have read the project requirements and seen the 3D model of PCB. I have few suggestions in order to operat もっと

$20 USD / 時間
(86件のレビュー)
7.2
ahmad5857

Hi sir, I read your project and i can handle high currents on PCB Boards. Lets talk to me about your 60 amps LED drive circuitry. Please note that i design mostly on Altium so i will give you good results. Regards もっと

$20 USD / 時間
(54件のレビュー)
7.0
saddamgul842

Hi dear I am an electronics engineer and have industrial experience of power electronics circuit and PCB layout designing. I can design a PCB layout up to 16 layers. Share your project details further I will provide yo もっと

$15 USD / 時間
(106件のレビュー)
6.8
macroenergy

General message: Dear Sir, Greetings from Turkey. I hope you are good. Let me introduce me. I'm Electronics Enginner who have 19 year experience. My experience is related to power electronics, hardware design, もっと

$15 USD / 時間
(78件のレビュー)
6.8
haris021

I have Bachelors in Electrical Engineering and holds Masters degree in Energy Systems Engineering with strong research background. I have worked on several PCB design and product development projects with indepth under もっと

$20 USD / 時間
(71件のレビュー)
6.2
Anthony989

Hello, I am Anthony from Sri lanka. I have 7 years of experience in the field of electronics. Currently I am working as a full time freelancer and I have state of the art electronic lab. Why you should h もっと

$20 USD / 時間
(68件のレビュー)
6.6
Mauricio768

Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 12+ years with Circuit design, PCB design, manufacturing functional prototyping with もっと

$20 USD / 時間
(33件のレビュー)
6.0
hudex

hye dear i am electrical enginier and pcb expert i have done many project i have vast of knowledge about that kindly contact mne................

$15 USD / 時間
(121件のレビュー)
6.0
AndreySer

Hi, i 'm able to start immediately , i'll make all needed gnd/power separation and proper filtering due among other, i'm proficient in development audio devices ..

$18 USD / 時間
(11件のレビュー)
5.5
HarimohanG

Dear Client, I have read and understood your requirements and could do it for you in the least time and utmost superior quality. I have experience in polishing existing PCB design and could design it for you as per you もっと

$20 USD / 時間
(5件のレビュー)
5.2
realhudex

hellow sir i am intresting your project..olish existing PCB design i am good in circut design and pcb expert kindly text me for more kindly regards thanks

$15 USD / 時間
(11件のレビュー)
3.8
cesur135

HELLO I M ELECTRONIC ENGINEER I HAVE FINISHED MANY PROJECTS I KNOW PCB DESIGN , FPGA,VHDL VERYWELL LET ME DISCUSS MORE

$15 USD / 時間
(6件のレビュー)
4.1
z1905z

Hello, I am an Electrical and Electronics Engineer and I completed my master's degree. I designed electronic circuits and I have academic publications. I can make this project.  As you will see in my profile, my last もっと

$17 USD / 時間
(12件のレビュー)
3.6
vBhavin21

Hello there! 7 years of experience with PCB Design with Eaglecad, Orcad, Altium. Sincerely, Bhavin

$16 USD / 時間
(3件のレビュー)
3.3
nesterovintanton

Hello, Could you take a time to discuss with me for thisproject? Your project is really interesteing to me and i can provide my best service with this project. Please contact me. Thank you. Anton for this project.

$20 USD / 時間
(レビュー1件)
2.5
nirajlathiya7

Good Evening Team, I am a professional PCB designer at present working with an Aerospace Industry. I would Like to Work for you people as a Part Time Hardware Designer. I have Experience in EAGLE and ALTIUM. Have もっと

$17 USD / 時間
(2件のレビュー)
2.2
toghani2020

I have a PhD in Fluid Mechanics from the University of Toronto and am well versed in all computational and analytical software. And I have friends who have phd in electrical and civil engineering and computers, and we もっと

$20 USD / 時間
(0件のレビュー)
1.9
jabahat

Hello! What CAD used to this project now? (Hope it KiCAD or some else GPL CAD system... or it CAD that you can provide temporary license :-) )

$25 USD / 時間
(0件のレビュー)
0.0
vimalribe

Hello, I have a experienced in PCB design and hardware design for electronics circuits new development. experienced in components footprint creations and layout design. o support for end to end project. if u feel もっと

$17 USD / 時間
(0件のレビュー)
1.6