Eagle PCB Design

$80-180 USD

クローズ

投稿日:

6年以上前

$80-180 USD

完了時にお支払い

Eagle PCB Board Design The project has to be done only whith Eagle CAD software ([login to view URL]). Components should be on one side of the pcb. The purpose of this project is to design a PCB board with a Rasperry Pi 2/3 : - Standard DIN rail mounting - 24v power supply with surge and reverse polarity protection, - External battery connector, - Simple UPS status and control via the I/O pins of the Raspberry Pi board, - On-board LED for battery operations status, - File Safe Shutdown Functionality, - On-board LEDs for power supply (24v, 12v, 5v, 3V3) and serial line activity, - Lcd connector (16x2), - external ADC (Analog Digital Converter) connected via SPI to Raspberry Pi, - Real time clock (RTC) with on-board lithium back-up battery, - PWM FAN control, - Buzzer, - 8 Relays + leds (8-Channel Relay Module with Optocoupler H/L Level Triger 12V/5V ?, relays that can be configured as ACTIVE-HI and ACTIVE-LOW) - I2C Eeprom - Reset Button - 3 isolated optocouplers, - 40 pins female connector to interface to the Rasperry Pi 3, - Power supply, connections ( serial, can...), digital and analog I/O on screw terminal block - Headers connectors: (Standard RS-232 and RS-485 interfaces to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection) 1 x Protected RS232 Port 1 x Protected RS485 Port 1 x Protected 1-wire port 1 x Protected I2C port 1 x Protected SPI port 1x Protected CAN bus to connect additional board - Stackable Header for breadboard Maybe there’s something that could be discussed or added. Full source files and gerber files for pcb production of the project must be provided. The bidder must have experience on hardware design system, keep time line and HAVE TO SHOW US PROFF OF CONCEPT PROJECTS.

Electrical Engineering

プロジェクト ID: 16010327

プロジェクトについて

20個の提案

リモートプロジェクト

アクティブ 6年前

お金を稼ぎたいですか？

メールアドレス

Freelancerで入札する利点

予算と期間を設定してください

仕事で報酬を得る

提案をご説明ください

登録して仕事に入札するのは無料です

この仕事に20人のフリーランサーが、平均$264 USDで入札しています

@sagradoamicus

Hi I am experienced PCB designer with more than 8 years of experience. I can do it for you. I have completed more than 220 projects here, please review my profile to see the feedback from my previous employers. I am waiting for your reply to start Regards

$600 USD 15日以内

4.8

(268 レビュー)

8.0

@aliserbetci

Hi, I am electronic engineer. I have developed many projects with Eagle. I have worked with the Sw over 6 years. All the Best, Ali Serbetci

$333 USD 5日以内

5.0

(37 レビュー)

7.4

@ExpertEngineer7

I am eagleCAD expert and embedded system electronics engineer. please consider sending me a message so that we can discuss further

$500 USD 14日以内

5.0

(20 レビュー)

6.7

@ahmad5857

Hi Sir, We can do your project. just check our portfolio and see some aesthetic looking PCB Layouts. We are professional engineers and developers who do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professionals with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have collaboration with Atechcircuits & WELLS Inc in Shenzhen China for excillent quality PCB manufacturing. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !

$250 USD 10日以内

4.8

(51 レビュー)

6.8

@cpp2048

Do let me know if you need this design professionally fabricated. I have good working skills in these areas as your requirements are. I am a software developer as well so I know how to do these things right. Will use EAGLE to design this and share the design files as well as gerber files. We can discuss more if the project fee suits your budget. Thanks

$1,000 USD 10日以内

5.0

(49 レビュー)

6.0

@arslanuet123

Eagle expert here to help u. I have done work on eagle and can show you some of my previous work for your satisfaction

$144 USD 10日以内

4.9

(62 レビュー)

5.9

@mzdesmag

I am an engineer and i have experience on this project and i can complete this perfectly. Kindly check my profile for reviews on my past work.

$144 USD 5日以内

4.7

(11 レビュー)

5.0

@alexanderkf

Hello, I have 8 years of experience in PCB design All of my experience is in the automotive design. Where they have very strict rules and complicated Pcbs that go up to 12layers I have made layouts for GSM, GPS, WIFI, DDRAM3, ARM CORTEX and other chips. I will like to know more about your project Thank you, Alex

$173 USD 30日以内

5.0

(25 レビュー)

4.8

@engineeringexp

Master in Engineering, Electrical and Electronic Engineering undergraduate student, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical skill and good research background. I have successfully completed IELTS with an overall band of 7 and have a good proficiency in English COMPLETED PROJECTS • FM radio. • VHDL Design of an Up/Down Counter. • Design of Up/Down Counter using PIC. • Duck Shooter Program using C. • Pointer movement controller on 2-dimentional axis using C. • LCD display Manipulation projects including: o Text Display o Volt-Meter • Analog to Digital Conversion (8-bit). • Sound to Light Color Organ Design and Development. • Minesweeper Player Creation using PIC. • Simulation of an End to End Communication System with MATLAB. • (BENG Individual Project) (MENG Part A). • (MENG Individual Project) (MENG Part B). • (MENG Group Project).

$85 USD 1日以内

4.7

(12 レビュー)

4.3

@lydialin2000

1 ) I have over 10 year experience of PCB Layout / Hardware / EMI / Firmware designs, we can complete various design and layout requirements. # 8051 MCU / ARM Embedded system / Arduino / ST32Fx / IM6x / AVR / TI MSP430x / PIC etc # WIFI / BT / BLE / GPS # LCD / DTV / MD / Web Camera # LED / Lighting # LCD Inverter / Touch ... PCB design and layout. # NIC / LAN # IOT / NRF52832 / ESP8266 # Battery / Solar Charger # BMS ( Battery Management System ) 2 ) I can use as below to design and layout. # Altium / Protel99SE # Eagle # PADS # KiCad # OrCad / Allegro # Proteus # DipTrace 3 ) I can communicate well in English, please contact us by e-mail or s-k-y-p-e me (saludpcb) to find out relevant details. 4 ) I also have to provide PCB layout design service ( super low price ) # For PCB layout: 2 ~ 4 Layers -> $0.4 ~ 0.6 USD per pad, 6 ~ up Layers -> $0.8 ~ 0.8up USD per pad. # For reprinting of schematic and component, quotation will vary by each case. # A minimal of $100 USD 2L / $200 USD 4L / $300 USD 6L will be charged for each case. What I can do are: # 1,2, 3, 4, 6, 8, .... layers ( PCB / FPCB ) # High Speed and High Density PCB layout # Differential Signal PCB layout # RF Signal PCB layout # 3D Models / Freecad

$166 USD 10日以内

4.9

(6 レビュー)

4.0

@HiteshPatel1194

I have 3 years of experience as electronics engineer.

$85 USD 3日以内

5.0

(2 レビュー)

2.5

@yefersondiaz

I am electronic engineer for telecommunications with a lot of experience in pcb design with Eagle and OrCAD. I can do your pcb design faster and cheaper than the other ones! I am English and spanish speaker.

$144 USD 7日以内

0.0

(0 レビュー)

0.0

@luizfrg94

A proposal has not yet been provided

$111 USD 5日以内

0.0

(0 レビュー)

0.0

@alecabral

I am an Electronics Engineer and specialist in embedded system. In the past 12 years I have been develope a lot of boards. I usualy work with Orcad, but I bery familiar with Eagle. I can make schematic, and PCB desing, and also programing many uC and DSP and Raspberry PI. I'm very versatile and can help in your desing in more than one area. Waiting for your repply Best Regards Ing. Alejandro Cabral

$888 USD 14日以内

0.0

(0 レビュー)

0.0

@Vidhulm

Dear Client. Thank you for your kindly visiting to my profile. As High-Skilled Embedded System Designer, Developer and Manager, I have full experience and rich knowledge of Embedded System Development. 1) Rich Schematics and PCB designer. - Over 11 years designing experiences using Altium and Cadence Design Tool and Simulation Tools. 2) Firmware Development Experiences. - Rich knowledge and experiences at C/C++/Embedded C. - I like using various of MPU, ARM and embedded system equipment. MCUs : Atmel AT91SAM7SE512, PIC16F/18F, Atmega family, 8051 family, NRF51822/52832, LPC,Nuvoton 8051 Family Wifi-MCUs : ESP8266/ESP32. Arduino: Arduino UNO, Arduino Mega328, Arduino NANO Linux-Embedded: Raspberry Pi, - Experience with Keil, IAR, Atmel Studio, CubeSuite+, Arduino, MPLABE,Eclipse,Altium (For PCB Design), Cadence (For PCB Design) - Rich experiences at variant peripherals. UART, I2C, SPI, USB, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, Finger Print Module, Magnetic cardreader, RF Card Reader, Thermal Printer(POS) - -Experiance with all types of display like Color LCD,TFT, Monochrome LCD, 2 x 16 LCD 3). Experience. - embedded controlling system. - Wearable IOT project. - Variant BLE sensor project. - iBeacon project. - GPS based vehicle Tracker - BLE based Student Attendance System - Medical - Ventilator - Handheld POS machine - ESP8266 based home automation I'm always work on my client's timezone. Thank you for your time.

$111 USD 3日以内