Finger touch counter design -- 2
$250-750 USD
着払い
JOB DESCRIPTION
1. We will complete the design by the following details
2. The Device consists of one board, Battery, touch screen wireless charging system, firmware with wireless charger, the overall design would be the same as the attached Image.
3. The main board placed inside the enclosure that is connected to the flex PM OLED (OLED/PLED Segment) with
a. Simple screen themes
b. An arrow should show the sweep direction because the ring will use for right and left hand.
c. Count Number with 3 different fonts (chosen in a menu)
d. It will be going to sleep mode if it not in use (and wake up with a double sweep on it?
e. The PM OLED should show up to 99999 (five digits)
4. The screen should design for two direction view, right and left hand, automatic with direction sensor on with setting in a menu.
5. The battery lifetime should be 24h at least.
6. The screen should be in blue or white color.
7. The enclosure should be waterproof.
8. It has a wireless charger as you can find in the attached image
9. The firmware has to count how much the user sweep on the ring.
The design is completed %90 and the designed files will be sent, we have to continue with the prototype phase in the following steps
1. Testing the functionality of the PCB design and Firmware and completing the enclosure. (We recommended to doing this step with evaluation kit).
2. Manufacturing the PCB and 3D print the enclosure and testing the firmware and functionality of Device.
We will agree with the following working method
1. I will provide designed files (electrical schematic, PCB, file in Altium Designer software; 3D designed files in SolidWorks file format; firmware in eclipse software.
2. I will check the prototyping process, and you have to provide me with all the main design file in each step.
3. You are responsible to update the contractor every two days.
プロジェクトID: #17634383
プロジェクトについて
11人のフリーランサーが、平均$1293 で、この仕事に入札しています。
Hi there i can do this project perfectly please inbox me for further instructions Thankyou ..................................
PCB layout Expert and one associate, specialist in hardware programming well one year support for Design Factory Management updates the first batch productions
I am full time freelancer of Electrical & Electronic Circuit Designing & Simulation, PCB Designing, Consultancy of different types of Electrical & Electronic Problem. I am ready to give hardworking, reliability, flexib もっと
I have 3d printer and i am mechatronics engineer. But i dont know about your microcontroller if you use C oriented microcontroller platform or PIC and Arduino ı can help in software, i am good in Solidworks design and もっと