Automatic Process Control System For Cutting and Bending Machine Using PLC - open to bidding
₹1500-12500 INR
クローズ
投稿日: 10年以上前
₹1500-12500 INR
完了時にお支払い
The entire function of the system is controlled by the PLC ladder logic diagram. The object to be cut is placed in the conveyor1 and the conveyor1 rotated with a motor. The movement of the conveyor1 can be controlled with the help of a sensor which produces the output signal when it senses the presence of an object. At the same time the Holding Solenoid is activated by the PLC through the sensor feedback. A timer is provided to hold the object for the preset time during which the object is cut by the cutting solenoid.
Then the object is passed to the next conveyor for the process of bending. The movement of the conveyor2 can be controlled with the help of a sensor which produces the output signal when it senses the presence of an object. At the same time the Holding Solenoid is activated by the PLC through the sensor feedback. A timer is provided to hold the object for the preset time during which the object is bend by the Bending solenoid.
LOGO!Soft Comfort is available as a programming package for the PC. LOGO!Soft Comfort is the LOGO! programming software that you can use on your PC to quickly and easily create, test, modify save and print the circuit programs. The topics in this manual, however, relate only to the creation of circuit programs on the actual LOGO! Basic module. The programming software LOGO!Soft Comfort contains extensive online help.
Hello there,
I will be happy to help you in this project. I have more than 7 years experience in PLC programming. Would you please send me a PM with further details about the project?
Thank you for your time.
Regards,
Charis