Convert 2D AutoCAD Drawings into 3D Solidworks Drawings

$250-750 USD

クローズ

投稿日:

約8年前

$250-750 USD

完了時にお支払い

I have 2D AutoCAD Drawings of the four different parts that make up a very simple electronic enclosure. I need to make 3D drawings in Solidworks for each of the parts and then be able to assemble them into an enclosure. I have 2D AutoCAD drawings for each of the parts that make up the complete enclosure. There are two front panels and four rear panels. The top plate slides into the bottom U channel part. Both of theses are extruded [login to view URL] the photos of one variant of the enclosure. There are several variants of the enclosure depending of the type of rear and front panel which vary only in the number of holes/cutouts . These enclosures are currently in production but I need 3D drawings since most fabricators these day prefer 3D. In the first phase I need a quote to make 3D Solidworks drawing for two front panels, four back panels and the top and bottom piece. It should be possible to assemble the enclosure into different variants by assembly the 3D parts. If like the results of the first phase then in the second phase, I need to have 3D drawings created of electronic printed circuit board assemblies that go inside the enclosure. The objective is to create assembly instructions as well as to check clearances. I will provide more info on the Printed Circuit Board stackup in Phase 2. I do have quite a bit of work but want to start with Phase [login to view URL] should be a piece of cake for anybody experienced in 3D Solidworks

AutoCAD

Solidworks

プロジェクト ID: 10127957

プロジェクトについて

91個の提案

リモートプロジェクト

アクティブ 8年前

お金を稼ぎたいですか？

メールアドレス

Freelancerで入札する利点

予算と期間を設定してください

仕事で報酬を得る

提案をご説明ください

登録して仕事に入札するのは無料です

この仕事に91人のフリーランサーが、平均$363 USDで入札しています

@ivangritsay

hello, i have more than five years experience in engineering/ 3d modelling by solidworks.I create 3d models for cnc milling and 3d printing. Very often Incoming documentation - is 2d pictures/drawings. I can make free preview model for you, to prove my skills. Please, answer me, this project is very interesting for me, thanks ps: this work is interesting for me, i make similar projects be every day, trust me, i can do this project fast and with good quality I'm very interested in your project and ready to start right now! Thank you

$250 USD 3日以内

5.0

(241 レビュー)

7.7

@kingjoon

Hello, We are a team with more than 14 years of experience in 3D design and 3D photorealistic visualization. We have done many similar projects in the past, check out our portfolio here: https://www.freelancer.com/u/kingjoon.html Please give me more details about your project so I can give you an exact quote to do the project. Looking forward to hearing from you, please let me know if you have any questions. Best regards, Mohsen

$750 USD 7日以内

5.0

(50 レビュー)

7.6

@moshchan

Hello! I can do your project. I am a 3D designer (my profession is design engineer of air vehicles). I have experience of creating 3d models using different 3d/CAD software (Solidworks, AutoCAD, Rhinoceros, 3ds Max, Zbrush) and preparation them for production using 3D printers or milling machines CNC. I look forward to cooperation. I work in a short time with a flexible price policy. Thank you for attention, Best regards, Taras Moschanskyy

$250 USD 2日以内

5.0

(128 レビュー)

7.7

@kalp29

i am professional mechanical engineer with first class. I am using solidworks cad from past decade. I am capable doing 2d, 3d, simulation motion animation. I have designed and developed more than 100 products .

$250 USD 10日以内

4.8

(343 レビュー)

7.8

@zeraw

Hello, I`m an experienced design engineer skilled in SolidWorks, interested in this project and ready to discuss any details.

$250 USD 3日以内

5.0

(150 レビュー)

7.3

@abushahama

Hi there - My name is Abu Shahama. I’ve read your brief and can see that you’d like to design electronic enclosure using SolidWorks. My team has 6 years experience in product designing and manufacturing engineering. We provide our services in 3D Solid & Surface Modeling, 3D Printing, Assembly Design, Mold Design, Sheet metal design, Tool design, Reverse Engineering, Detailed design, Manufacturing drawing and many domain work. I would approach your project by starting with concept design and getting the design completed, before starting the actual development phase. I am highly qualified for this project and would love to speak with you further about taking this project on. If you'd like to view my previous work, take a look at my Freelancer Portfolio.

$400 USD 5日以内

5.0

(109 レビュー)

6.6

@IvanWOW

Please check my portfolio. Here are the projects I've done. If you like please give me an opportunity to provide an excellent work for you. I will make sure you are happy. Regards, Ivan

$578 USD 10日以内

4.9

(35 レビュー)

6.7

@totoco87

A proposal has not yet been provided

$250 USD 3日以内

4.8

(141 レビュー)

6.5

@yashgargmech

Hi, Please see my qualification and experience below. MSC IN MECHANICAL ENGINEERING, UNIVERSITY OF SUSSEX I have 5 years experience in Furniture design, product design and Mechanical design. I have been working as a Freelancer for 6 months and already have numerous clients with regular work. Worked on a number of big and small projects for our Rail and Rolling stock clients like Arriva, Porterbrook, Knor-bremse, Unidad, Wabtec, Siemens, Alstom and our Commercial sector clients like Galliford try, Balfour beatty, Mace, Chisholm and Winch, Barlows, Hamad International Airport, DAS, Technology desking and TM Consultancy. Please message me to discuss in detail. Kind regards, Yash Garg

$400 USD 7日以内

4.9

(25 レビュー)

5.6

@Svinarchuk

Hi! I'm mechanical engineer with more than 5 years of experience in the plant. I work in Solidworks more than 8 years. I will be glad to work with you!

$250 USD 3日以内

5.0

(7 レビュー)

5.6

@logesh007

Hi.!! This is Logesh Raja. I am a Certified Solidworks Professional certified by Dassault System. I have 5 years of hand on experience in Soliworks. I am good in product designing and sheetmetal also. I am new to this freelancing job but not to this field. If you work with me once, then you will always work with me in future. I can complete your work in stipulated time. Hire me, Lets work together. Regarding my previous experience, I am working as design Engineer in a reputed company. I am working on designing a completely new Diesel Engine. Hope this would help for this project. I will do it for free. you need not pay me for the first job. Just hire me. Kindly dont deny my proposal. Expecting to work with you in a long term. I saw the JPEG you attached. I will do it for less than my bit price. Kindly contact me. Lets have a long term deal. Thanks

$250 USD 10日以内

4.8

(68 レビュー)

5.8

@mecanikad

Hi I have the right skills for this project. You have right modelling this it's a piece of cake. Please send me your cad files and I'll send you back the model the same day. You award me only if you like so no risk for you.

$250 USD 10日以内

5.0

(35 レビュー)

5.6

@sami3008

Dear Sir / Madam, As a qualified mechanical engineer and a certified SolidWorks professional with extensive experience in product development and technical design, I firmly believe that your needs and my skills are highly complementary. My work experience has allowed me to gain significant knowledge of all phases of design processes from the conceptual design to the drafting. Please take a look at my portfolio to get an idea of the kind of products I have designed. I would be delighted to discuss your project with you at your convenience Thank you very much for your time and consideration, and I look forward to hearing from you soon. Yours sincerely Samy MAHMOUDI Mechanical Engineer / Product designer.

$250 USD 10日以内

5.0

(14 レビュー)

5.6

@ms25491

check my profile for more details .... will be waiting to hear from you ....

$277 USD 1日以内

5.0

(26 レビュー)

5.2

@irfanshekh

Dear Hiring Manager, Greetings for the day, I am a Design Engineer with 5 year of industrial experience, by qualification I am a Mechanical Engineer and PG in CAD/CAM. I read your requirements and found this project very interesting, I can do this task, please come in personal chat to discuss project in more details. I can use most of the CAD software like: For 3D Modelling and 3D Rendering: - Solidworks - CATIA - ProE - Creo - PDMS For FEA and CFD: - ANSYS - Abaqus - CAESAR II I have "PREFERRED FREELANCER BADGE" which you can see next to my profile picture on bid and also on my profile (https://www.freelancer.com/u/irfanshekh.html).I am well qualified, skilled and experienced for this project. Please visit my profile to check my portfolio, clients reviews on my previous work and my reputation. I am a standard member here and a full time freelancer, so you can contact me anytime. Looking forward to hear from you soon. Feel free to contact me. Thanks & Regards, Irfan Shekh

$444 USD 10日以内

4.6

(29 レビュー)

5.8

@AhmedElbhje

if the project as you describe then the fair price for it 200$ , I can do it in very short time , I am certified expert in solidworks , check my profile "render" "plastic toys and parts" as work sample similar to what you want , can you send to my your files I will do one of 4 parts for free if you satisfied then hire my and continue this project .

$250 USD 5日以内

5.0

(26 レビュー)

5.3

@SolidDrafter3D

Hello I'm interested in your project. In the past week I finished same project for LED street lamp. And I made before many same projects. I'm design engineer with more than 12 years experience. I've been doing solid modeling SolidWorks, parts models and assemblies for any purpose (over 10 years), also 2D drafting in AutoCad (more than 11 years). I have CSWP certificate. I am sure that my experience and my qualifications will help you to achieve good results in your work and projects. I have wide experience to work with extrusion profile and aluminum parts, also aluminum enclosure design. Some of my work can be seen in the portfolio. We can negotiate the price and terms of performance, when I see the project details. Please provide more detailed information about the phase 2. I'm ready for long term cooperation. Thank you.

$250 USD 3日以内

5.0

(24 レビュー)

4.6

@gupta9665

Hi there, Greetings I would be interested in taking up this project. I am certified SOLIDWORKS User providing CAD Design/Drafting services I need to know a little more information regarding the work: - Which version of SOLIDWORKS to be used? This is an important aspect of this project since you want to use the SOLIDWORKS files in your system. - Do you've the required template that you like me to use? This is again an important aspect as the template would define the standards used by you/your company. - What other formats do you need other than SOLIDWORKS files? - Will it be OK to use configurations in the model? If you think I can fulfill your requirements then I would be happy to offer my services to you and we can collaborate together to build up a good business relationship. Please, let me know what is needed to secure this bid! Thank you for taking the time to read my proposal. Thanks and Regards Deepak Gupta

$250 USD 1日以内

5.0

(10 レビュー)

4.3

@anatol33

The price (30 usd) is for phase 1. The time required should be much less than 7 days I defined, I reserved some excessive time because I’m not experienced in this business – I mean freelancing, not SolidWorks. It seems that the work isn’t very complicated, I believe to finish it in 2 - 3 days but cannot guarantee. Using SolidWorks 2011 version. Best Regards Anatolii Kondratiuk

$250 USD 7日以内

4.8

(12 レビュー)

4.7

@girisudhir

Dear Buyer, I referred your project specific requirements for convert 2D AutoCAD Drawings into 3D Solidworks Drawings and It looks excited to work with. I have 15+ years of worked experience on similar projects to what you are looking for, and I am confident I can exceed your expectations. I have expertise in Autodesk Mechanical, Autodesk Inventor, Autodesk Revit MEP, Solidworks, Tekla Structures, Solid edge, Google Sketchup, Microstation, Bentley STAAD Pro, CNC Programming, Delcam ArtCAM, Catia, Bentley STAAD Pro, PTC Creo, Ansys workbench, Rhinoceros 5.0, Reallusion iClone. I take 100% initiative towards your project and will continue to work on it till you are completely satisfied with our work portfolio projects that you are free to peruse through at your discretion. For clarification you can contact on below mentioned details. I appreciate your speedy response. Thanks and Regards, Sudhir Giri

$578 USD 10日以内