Wireless sensor network security model using zkp project仕事

絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    20,724 wireless sensor network security model using zkp project 仕事が見つかりました。次の価格: USD

    ...Also, the electronic components of the CO2 sensor protrude from underneath the mounting board by about a millimeter, so could you hollow out a section underneath or raise the holes? Again, just a few millimeters is fine. The temperature sensor could be raised a bit to give it better access to air flow. Wind sensor has unnecessary plastic on it. For example

    $30 (Avg Bid)
    $30 平均入札額
    2 入札

    Hi, this project is about a device beeing able to detect two collors ( red and green)! The colors are actually two Led lights similar with the ones present at the cross walk! The device will be place at a few inches away from the Led lights! The device must also contain a long range Class 1 Bluetooth to be able to send the information to a phone app

    $1060 (Avg Bid)
    $1060 平均入札額
    30 入札

    ...private individual looking to automate the collection of my personal wearable sensor data. This data is logged automatically by the wearable device to the company's website, and then they have a dashboard, behind a login, where the data is available as JSON format. This project will consist of: 1. Web scraping the data after logging in 2. Storing the

    $592 (Avg Bid)
    $592 平均入札額
    11 入札
    Raspberry camera design 6 日 left
    認証完了

    I need a camera design for ras...flat cable, I need a rca connector, the same way it exists in cftv cameras. The sensor used will be the OV5647, the same used in the raspbery camera. I need something like the attached photo but with rca connectors instead of the flat cable for communication. I need the project files (gerber, bom, schema) and firmware.

    $111 (Avg Bid)
    $111 平均入札額
    2 入札
    build me a code for a pro 6 日 left
    認証完了

    ...make a small heater using a resistor, thermostat, and a fan. it will be used upon two arduino's where the heated resistor is on one. and the receiving side with the temperature sensor device is on another arduino, the fan could go on either... Transmit device: heated resistor Receive device: temperature sensor in the sensor pack Measure the temperature

    $186 (Avg Bid)
    $186 平均入札額
    12 入札

    I run a script on Matlab that takes data from an IOT sensor and transforms it (filters and integration over time). The result is output to a 6 column spreadsheet. I want to do this transformation without using Matlab, but instead run on a Azure SQL environment. Script is attached.

    $141 (Avg Bid)
    $141 平均入札額
    3 入札

    I need a function written in c++ using google Ceres, to solve an optimisation problem. I have a multi-sensor tracking setup as below: Three sensors, each streaming transform data as position xyz and rotation xyzw. The sensors are locked together. I know the extrinsic parameters of the sensors in relation to each other, as in the image below. As the

    $518 (Avg Bid)
    $518 平均入札額
    9 入札

    A NodeMCU ESP8266 is connected to a sensor and collecting approximately 10 seconds of data. I want to send this data to a mobile phone app via wifi; when the phone receives all the data, it will send it to my SQL server. The only purpose of the app is to receive and send the data.

    $214 (Avg Bid)
    $214 平均入札額
    9 入札
    Camera sensor activation detector 6 日 left
    認証完了

    ...instructions below will not be considered. The task: The application should be able to detect if the camera sensor is active (which typically would mean that some camera app is showing a preview of what the camera sees). When it is detected that the camera sensor is active, a floating UI should appear showing an icon. For bidders: 1. When you bid, please explain

    $162 (Avg Bid)
    $162 平均入札額
    4 入札
    Research Work 6 日 left
    認証完了

    1. D...mechanism for a multiple calls and for multimode terminal in a heterogeneous wireless networks. 2. Formulate and analyse the efficiency of multiple attributes decision making (MADM) methods and Soft computing techniques to improve the QoS of the network and user by efficiently using network resources. Technology may be used: 1. MATLAB 2. NS-2

    $23 (Avg Bid)
    $23 平均入札額
    3 入札

    i want to make a wireless version of a commercial transducer ..... the fishFinder sends and receives signals from a transducer using a cable that i want to eliminate and replace by a wireless connexion

    $17 / hr (Avg Bid)
    $17 / hr 平均入札額
    4 入札

    I'm a private individual looking to automate the collection of my personal wearable sensor data. This data is logged automatically by the wearable device to the company's website, and then they have a dashboard, behind a login, where it can be requested for download. This request for data is made by simply clicking a button. There is nothing downloaded

    $127 (Avg Bid)
    $127 平均入札額
    13 入札

    I am looking for an expert in MATLAB and Simulink and technical reports

    $320 (Avg Bid)
    $320 平均入札額
    5 入札

    Hi, We as Company Security Alarm Company looking for someone to Build an app with we can connect with our Alarm system wireless alarms and ip cameras so our customers can arm, disarm their house or business from anywhere in the world and view the cameras as well. we are willing to get some servers to manage if we need to support cloud storage for cameras

    $29 / hr (Avg Bid)
    $29 / hr 平均入札額
    25 入札
    Convert pseudo code to matlap 5 日 left
    認証完了

    ...that still have to be covered by the current set cover Ck */ while TARGETS ̸= ∅ do /* more targets have to be covered */ Calculate Fuv for each su ∈ SENSORS, pv ∈ P ; Let a sensor-pan pair (si,pj) covers Φij targets with force F′ij such that: Fi′j =argmaxvFuv;∀su ∈S;∀pv ∈P; ∀si ∈S;∀pj ∈P; Ck = Ck ∪{(si,pj...

    $20 (Avg Bid)
    $20 平均入札額
    2 入札

    I already have 50% of that project ready, once awarded, will give you the source code. I want a desktop application to get data from multiple fingerprint devices and upload the data to MySQL database. Requirements: 1. C# Application. 2. Clean and well documented code. 3. A form for adding MySQL database settings [host, username, password, database

    $223 (Avg Bid)
    $223 平均入札額
    9 入札

    I have a research paper based on wireless communications and would like to implement it. I want the full MATLAB code, simulations etc based on that ASAP. It's for a project purpose. Deadline Is 27th March( 3 Days )

    $37 (Avg Bid)
    $37 平均入札額
    6 入札

    ...find them in [ログインしてURLを表示] with the keyword “charging station”. Normally they are providing four to ten USB port, with or without wireless charger. Now we need an attachable one consisting of 3-port USB module and wireless charger module. It means different modules attach or combine together to become an integrated one. The end customers could buy

    $150 (Avg Bid)
    保証

    Hi Manvinderjit S., Would you like to write 20 articles for me? Here ...thermostat 2. Best z wave door sensors 3. Best z wave sensors 4. Best smart home motion sensor 5. Z wave security light 6. Honeywell z wave compatible devices 7. Best Z wave controllers 8. Savant home automation review 9. Best home golf simulator 10. How to setup a z wave network

    $100 (Avg Bid)
    $100 平均入札額
    1 入札

    I need professional guy in Linux Penetration testing. I need training on Burpsuite, Metasploit, facebook hacking, twitter hacking, wireless network hacking tools. The training will be many hours only (how to use these tools) the budget for this is 100$ please bid only if you are professional Thanks.

    $81 (Avg Bid)
    $81 平均入札額
    10 入札

    ...home with many components such as light, door sensor, locks, vaccum robot, temp sensor, blinds, security camera, chromecast and google home assistant in each room of house, 1 - i want to make something custom as per my requirements, 2 - i want to make a roof speaker google home assistant instead of using my google home, 3 - i want to put my ipad into

    $27 / hr (Avg Bid)
    $27 / hr 平均入札額
    12 入札

    The purpose of this project is to use a temperature sensor, along with a potentiometer, to convert analog data to corresponding digital values, then to process and format the digital information, then display the information in a Terminal window using UART via RS-232 usb cable from board. The microcontroller is a PIC24FJ64GA102. There is already given

    $49 (Avg Bid)
    $49 平均入札額
    6 入札
    Raspberry PI C++ application 4 日 left
    認証完了

    ...Send Bluetooth request to Sensor ID 1001 (e.g. 1001-data?) 2. Get Bluetooth request from Sensor ID 1001 (e.g. 1001-20) 3. Send Bluetooth request to Sensor ID 1002 (e.g. 1002-data?) 4. Get Bluetooth request from Sensor ID 1002 (e.g. 1002-60) 5. Access a remote MySQL Database (through internet) 6. Update the online database (sensor values) 7. Send Notificat...

    $539 (Avg Bid)
    $539 平均入札額
    20 入札

    Write a GUI with the following functions using Python 2.7.x: 1. Drag and drop icons of Wifi devices to locations in room, and use a formula we provide to calculate path loss between devices, and write the results into an array and save it to a file 2. Provide fields for user to enter wifi device IP addresses, paths of iperf and adb 3. Provide buttons

    $190 (Avg Bid)
    $190 平均入札額
    3 入札

    to design a system using PIC distributes electrical powers based on input sensor values. write c program

    $97 (Avg Bid)
    $97 平均入札額
    9 入札

    ...land of cheap shipping) to make me possibly large (10-200pcs) quantities of project parts that require soldering. The Image attached contains all the visual information about the orientation of the parts. All the components are listed and linked in the bottom of the project description, to be acquired by the maker. The battery box has to be for 3 AA

    $1329 (Avg Bid)
    $1329 平均入札額
    3 入札

    ...make a FFT function for an accelerometer vibration monitoring application. I have developed a sensor board that has ST LIS2DH12 and Microchip PIC 18F25K20 microcontroller running at 16MHz from it's internal oscillator. The code for the processor is done using Proton BASIC language. How the code should function: A 256 x 16bit signed word buffer which

    $545 (Avg Bid)
    $545 平均入札額
    10 入札

    ...would like to Have the RTC clock stamp those inputs with the time And have the code written with a description so I can change the baud rate coming in So I can use various sensor baud rates I’d like it to be able to work with or without attached uart sensors Essentially I’m trying to build a generic data logger And I’d like to also step up the capture

    $37 (Avg Bid)
    $37 平均入札額
    1 入札

    ...bought this Bluetooth receiver on Amazon: Bluetooth Receiver, Bluebyte Clip Bluetooth 4.1 Audio Receiver for Headphones with MIC for Hands-Free Calling and Music,Bluetooth Wireless Audio Adapter for Music Streaming Sound System.(Grey) It works great for controlling itunes media controls but I am not able to remap the controls on Mac Mojave so I can

    $586 (Avg Bid)
    $586 平均入札額
    12 入札

    Wanted, an expert coder with...expert knowledge of Raspberry Pi, sensors and hardware connection, and communication. The project: To remotely assist (using Team Viewer or similar) and backup our coder with the following: Monitoring of sensors for weather and industrial 4-20ma Communication using GSM Triggering of alarms Notifications via email/text

    $21 / hr (Avg Bid)
    $21 / hr 平均入札額
    18 入札
    MBUS protocol water meter wireless 3 日 left
    認証完了

    Hi, for home automation i need to read water m3 consumed using wireless. i found some water meter counter that use mbus protocol. I need something that can receive wireless data coming from the counter and convert it in RS232 TTL. The use of mbus is not mandatory but i need a very low power meter because battery inside the water meter must work for

    $90 (Avg Bid)
    $90 平均入札額
    5 入札

    ...and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi 3. An MCP3008 ADC is being used to convert circuits from analog to digital to interface

    $151 (Avg Bid)
    $151 平均入札額
    4 入札

    i want a Research about wireless power transfer for a paper

    $36 (Avg Bid)
    $36 平均入札額
    18 入札

    ...and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi 3. An MCP3008 ADC is being used to convert circuits from analog to digital to interface

    $155 (Avg Bid)
    $155 平均入札額
    5 入札

    ...and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi 3. An MCP3008 ADC is being used to convert circuits from analog to digital to interface

    $132 (Avg Bid)
    $132 平均入札額
    2 入札

    ...and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi 3. An MCP3008 ADC is being used to convert circuits from analog to digital to interface

    $124 (Avg Bid)
    $124 平均入札額
    2 入札
    IoT Automatic Pet Feeder 3 日 left
    認証完了

    Project details: Im looking for someone that can create an Iot based pet feeder that feeds the pet by time triggering, so the user can have three times of feeding the pet, and also I want it to connect to a Webpage to reschedule timing , also to trigger the pet feeder instantly with clicking on the desired portion from the webpage to feed the pet

    $1069 (Avg Bid)
    $1069 平均入札額
    25 入札

    ...and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi 3. An MCP3008 ADC is being used to convert circuits from analog to digital to interface

    $160 (Avg Bid)
    $160 平均入札額
    5 入札

    ...push buttons to navigate on TFT options & manage it • Two RS-485 serial communication channels, one as master MODBUS-RTU and the other as SLAVE MODBUS-RTU • I2C temperature sensor. • USB Host interface to connect an USB pendrive. 3. TFT CONTROLLER FIRMWARE The main purpose of this new firmware development is to migrate the existing TFT CONTROLLER application

    $8987 (Avg Bid)
    $8987 平均入札額
    36 入札

    Need a GPS fuel sensor working prototype as per design documents

    $2075 (Avg Bid)
    $2075 平均入札額
    25 入札

    This is for a voltage sensor circuit PCB that will detect voltage on a sensor wire and a tester to test the PCB board. It operates on 230v 50Hz.

    $1907 (Avg Bid)
    $1907 平均入札額
    27 入札

    Design a logo for the MAX MOBILE brand. Our company is a wireless (cellular) provider for Smartphones. I would like the logo to be very unique like the Monster Energy logo (see attachment). I'm not saying copy this logo, I'm saying I want something real unique like this. Also you can use a standard font as a baseline but the logo should go way beyond

    $50 (Avg Bid)
    保証
    $50
    237 エントリー

    I want a logo for my brand..we deal in mobile accessories specially headphones earphones wireless earphones

    $21 (Avg Bid)
    $21 平均入札額
    31 入札

    My project require someone knowledgable in the area of wsn. The main Idea would be enhancing a currently existing routing protocol in wireless sensor nodes, the code can be done in any language, I prefer Matlab and or c++ using omnet++ simulator

    $451 (Avg Bid)
    $451 平均入札額
    17 入札

    ...and improved security services via SIEM and QRadar, improvised operator access management to Xxxxx’s data and renovation of customer infrastructure through a complete clean-up/revamp of the firewall Infrastructure. And the customer transformation journey continues…….with new orders to transform customer’s LAN infrastructure to a Wireless LAN based soluti...

    $20 (Avg Bid)
    $20 平均入札額
    2 入札
    mini project 1 日 left
    認証完了

    I built the circuit attached in the picture. the whole circuit works on python code. the sensor was working BUT the LCD screen has error in the code. all I want is correcting the error in the code to run LCD

    $133 (Avg Bid)
    $133 平均入札額
    12 入札
    Program plc 1 日 left

    get input from banner hi speed sensor and provide output to air cylinder

    $189 (Avg Bid)
    $189 平均入札額
    16 入札