絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    369 vector cad image 仕事が見つかりました。次の価格: USD

    I have complete CAD elevations and plans for a house and need to build a Sketchup model based on them. Very basic model needed as I will apply all materials and detail.

    $111 (Avg Bid)
    $111 平均入札額
    99 入札

    Hello, i have a flat, raster image of a floorplan and need the below work done on it: - convert the image to vector - trace everything (including the lines) in autocad (because the lines i have in my image are pixilated and not straight) - the internal walls thickness should be reduced to 19cm. - replace the existing objects (such as beds) to

    $44 (Avg Bid)
    $44 平均入札額
    53 入札

    I want a 3D modelling of a computer training hall that match an internationally standard approach.

    $56 (Avg Bid)
    $56 平均入札額
    21 入札

    I need this attached logo design in a CAD Vector that will work for a laser cutting machine. The logo will be stenciled cut with the laser. So the file needs to suitable. The overall panel shown in the image is 45" Wide and 21" High. The logo placement should be proportionate to the photo attached.

    $85 (Avg Bid)
    $85 平均入札額
    10 入札

    I need help getting a couple of parts designed in cad. I have some basic sketches on hand to give you an idea but I feel they might be better designed. Basically I have a 40mm outer diameter tube (main body) which will have some leds and other electronics in it. I then need to have a removable attachment system on top (2) that can pass 5v and a data

    $31 (Avg Bid)
    $31 平均入札額
    47 入札

    PRODUCT DESIGNING OF GYM EQUIPMENT SHOULD BE DONE IN 3 D , ACTUALLY WE ARE MANUFACTURER FOR GYM EQUIPMENT SO WANT TO DESIGN THESE EQUIPMENT IN 3D AND AUTO CAD

    $299 (Avg Bid)
    $299 平均入札額
    49 入札

    Drawing Auto Cad 2D , Instalasion be future

    $22 (Avg Bid)
    $22 平均入札額
    93 入札

    4 story concrete building design using ACI code of practise, Need detaled cad drawings for site execution

    $816 (Avg Bid)
    $816 平均入札額
    43 入札

    Hi bintehawa086, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $18 (Avg Bid)
    $18 平均入札額
    1 入札

    I'm a home remodeling contractor that needs a section of a Kitchen (already built) drawn up in CAD so I can sent to metal fabriactor to design a metal staircase. I would need an elevation drawing and a floor plan of the first and 2nd floors at this area. It's a small area in the corner of the kitchen where the ceiling opens up to a landing on the

    $275 (Avg Bid)
    $275 平均入札額
    18 入札

    Looking for a freelance designer with expertise & proficiency in CAM (Solidworks/ PTC Creo/ Autodesk Inventor/ Fusion 360) . Experience in designing Car Interiors would be an added advantage. (Removed by Freelancer.com Admin). BUDGET TO BE DISCUSSED, BASED ON SKILLS AND PROJECT.

    $26 (Avg Bid)
    $26 平均入札額
    34 入札

    Hi CAD STUDIO, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $87 (Avg Bid)
    $87 平均入札額
    1 入札

    Hi CAD STUDIO, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $25 (Avg Bid)
    $25 平均入札額
    1 入札

    Hi Bestudio / CAD Designer, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $9 (Avg Bid)
    $9 平均入札額
    1 入札

    ...for the first design according to the price agreed upon Here are the examples [ログインしてURLを表示] [ログインしてURLを表示] [ログインしてURLを表示] [ログインしてURLを表示] [ログインしてURLを表示] you can send back the design to us into the email CADjewelrydesignerhire@[ログインしてURLを表示] Thank

    $5 / hr (Avg Bid)
    $5 / hr 平均入札額
    24 入札

    Scan data in the form of .stl files need to be converted into 3D cad models , If you are familiar with Geomagic, SolidWorks, Rhino Cad, Catia, NX etc. and have GENUINE BONAFIDE experience in Reverse Engineering then this job could is for you. Please only bid if you have completed a lot of Reverse Engineering mesh data or point clouds. The 7 parts scanned

    $150 (Avg Bid)
    $150 平均入札額
    40 入札

    Require two CAD files drawn for plastic moulds with spherical holes incorporated. Small dimensions used (<=30mm). Permanent snap lock mechanism required to fit pieces together. I have basic drawings to show you.

    $125 (Avg Bid)
    $125 平均入札額
    54 入札
    Trophy icon CAD to 3D (house plan) 終了 left

    The Project is to provide an exterior layout with north, south, east, west elevations. The rendering will be in color with designer's choice of different textures which have been provided. The design will be a 3D rendering which we will be making changes to as the project continues to completion. Thank you.

    $100 (Avg Bid)
    保証

    I need designs made for the indexes and logo on watch dials in CAD.. I need them to be laser cut out also in steel. I have specific designs needed to be made in cad... If you work with / or are a laser cutting / engraving service also that is better. **The picture attached is just an example of indexes and logo for reference. These are are not

    $120 (Avg Bid)
    $120 平均入札額
    39 入札

    Greetings, I'm looking for someone to provide for me a 3D CAD model of the Rotax 912 water inlet seen in the photos. Item 19 on the assembly image. The difference is I need the water inlet to angle out (away from the engine) at 45 degrees instead of the 90 degrees that it does. I would like a file suitable to be sent to a CNC shop to have the part

    $109 (Avg Bid)
    $109 平均入札額
    62 入札

    I have a remodel project I need drawn for permits

    $161 (Avg Bid)
    $161 平均入札額
    53 入札

    I am looking for someone to make me a jewelry pendant CAD design. Every letter in the alphabet and every number from 1 - 9 in a specific font ( I will forward to you ). 1 in tall max with a bail that attached from the back of the pendant, not above. 35 total CADs - Message for details.

    $18 / hr (Avg Bid)
    $18 / hr 平均入札額
    61 入札

    We have a urgent need for 2-d elevation functionality and its urgent.

    $122 (Avg Bid)
    $122 平均入札額
    2 入札

    To design site layouts for automatic car wash stations in CAD and converting to 3D modelling.

    $156 (Avg Bid)
    $156 平均入札額
    32 入札

    To derive and draw 2D and 3D cutting plans of a Mini Moke's (vehicle) mostly flat body panels. To be used in cutting panels from flat sheet such as 12mm form plywood using a flat bed 3 axis router for the fabrication of full scale a 3D mock-up.

    $35 (Avg Bid)
    $35 平均入札額
    28 入札

    I required jpg file to be converted to cad or vector format. I have attached the image

    $27 (Avg Bid)
    $27 平均入札額
    17 入札

    We are looking for some to draw up a section of DN80 pipework based on photos and a couple of sketches with dimensions We will provide jpegs/pdfs with details (See attached), and require full 3D drawing in DWG format suitable to provide for BIM

    $45 (Avg Bid)
    $45 平均入札額
    44 入札
    CAD DESIGNER 終了 left

    We introduced our selves as the leading and super quality drawing, draughting and design centre in west bengal. Our centre is Excellent efficiency and prompt service throught India..

    $1725 (Avg Bid)
    $1725 平均入札額
    11 入札

    Hi, We need to buy a design of a quality jig control for manufacturing. the output we aim it's the 3D and 2D in solidworks. we have the cad of the final part that we need the jig and we can shared it. It's a small project to test, but we have a lot of this kind of projects and others biggers.

    $145 (Avg Bid)
    $145 平均入札額
    81 入札

    ...solidworks (or you can use CAD/AUTOCAD if that is easier for you). The details can be found here: [ログインしてURLを表示] So you just need to work on writing 1000 words for the methodology based on how you've improved the fan's design and carried out the relevant calculations, the solidworks design (or you can use CAD/AUTOCAD if that is easier)

    $48 (Avg Bid)
    $48 平均入札額
    25 入札

    I need an architectural rendering/CAD sketch for a new hotel project. Nothing official with a seal or stamp, just something I can use for my reference and to show colleagues.

    $180 (Avg Bid)
    $180 平均入札額
    44 入札

    Dental crowns, bridges, implant

    $26 (Avg Bid)
    $26 平均入札額
    8 入札

    Eu preciso de um modelo 3D de algo.

    $96 (Avg Bid)
    $96 平均入札額
    13 入札
    Trophy icon Flat Pack Fire pit copy 終了 left

    Have pictures of a flat pack fire pit which I am going to change to suit my own requirements. I do need these copied precisely though in vector format to scale please. Must also include a CAD image of it assembled to show the design is correct. The thickness of the material is 2.5 so allow for this. I found it on pinterest and it is also at this website

    $23 (Avg Bid)
    保証

    We have a CAD file of a product, and would like a video created using the file. In the video, it would seamlessly and smoothly rotate the product around and show the various features and functions. The video would be a total of 30-seconds. Here is a preview of the CAD file. [ログインしてURLを表示] Please bid for a fixed project amount

    $255 (Avg Bid)
    $255 平均入札額
    30 入札

    please see attached. i need something similar. produce a scale drawing of a fence.

    $131 (Avg Bid)
    $131 平均入札額
    22 入札

    We need to design a climbing wall for our technology solution. I have attached an example (this is not owned by us and cannot be copied). We just need the full 3D wall design, no graphics as we will be designing the painting. Someone with knowledge of climbing/adventure playgrounds preferable. This is the first of many designs. Dimensions of first design: 26m long Foam pit 3.5m deep ...

    $593 (Avg Bid)
    $593 平均入札額
    45 入札

    i NEED STEP, PDF FILES OF THIS BOX MADE. aTTACHED ARE DRAWINGS OF THE TOP AND ALSO OF THE BOTTOM PLATES NEEDED TO MAKE THIS BOX

    $20 (Avg Bid)
    $20 平均入札額
    19 入札
    Trophy icon Draw a logo in auto cad 終了 left

    to draw the attached logo in autocad , need to draw all the logo even the text need to be drawn not text typing

    $50 (Avg Bid)
    保証

    We are a booth manufacturing company and need a CAD/Blueprint Drawing for an 8x10 Booth.

    $162 (Avg Bid)
    $162 平均入札額
    18 入札

    I want to be able to import this handle into my Autocad software program that use DWG files and colour it myself within the program. the size of the handle is 175mm long 38mm high 18mm wide If the file can be adjustable in size, all the better, but not a problem if it can't be.

    $26 (Avg Bid)
    $26 平均入札額
    67 入札

    We need 3d Drawings made for a new building that we are building. We already have the architectual plans. We need the 3d drawings done so we can make sure we are not missing anything important with the design. In total we need five 3D renderings of the certain parts of the building. See this link for an example of what we are looking for. [ログインしてURLを表示]

    $476 (Avg Bid)
    $476 平均入札額
    59 入札

    I need a civilian part were they can put names and warrants etc. I also need a police part where they can make them 10-8 etc and look up civilian names that the civilian put in.

    $26 (Avg Bid)
    $26 平均入札額
    15 入札

    Ihave some pdf of some part design i need 3D CAD model of same and autoCad file also for manufacturing purpose

    $132 (Avg Bid)
    $132 平均入札額
    43 入札

    I need a slick industrial design for my product. The design has to be very appealing and sophisticated. Attached are the functional diagrams. CAD models has to be created, which can be 3d printed to perfect dimensions.

    $139 (Avg Bid)
    $139 平均入札額
    64 入札

    This is a 3d model of a 4 storied building.

    $21 / hr (Avg Bid)
    $21 / hr 平均入札額
    30 入札

    Alter drawing dimensions on Elevations, Floorplan, Site and Location Plan to match. UK planning application / architectural experience essential. It should be a quick job for an experienced person.

    $186 (Avg Bid)
    $186 平均入札額
    47 入札
    Vector Image 終了 left

    I am needing a vector image drawn up to make a plate which I intend to re-make to match the original. I will need someone to re-generate this in vector image (cad file) so I could have the plate re-created with a new label. Currently the label displays: “The Sorcerer’s Stone” I want it display “The Philosopher's Stone” with the ...

    $30 (Avg Bid)
    $30 平均入札額
    30 入札