絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    737 threadx bootloader 仕事が見つかりました。次の価格: USD

    ...requirement to be met on your side is a Android phone with unlocked bootloader onto which you can install the latest crDroid 10.2+ - compatibility see , or an unofficial 10.2+ build, to see if you can reproduce this issue The task here is to identify the anomaly and fix the issue so even the latest crDroid custom ROM for my Nokia 6.1 can again communicate and function seamlessly via adb with my Intel Mac running macOS Monterey 12.7.4. In-depth knowledge in the anatomy of Android and adb are required towards fixing this issue. In your job offer, first and above all include the following information: 1. Which Android phone do you have (Model + exact model identifier)? 2. Have you unlocked your phone's bootloader so you can install a custom ROM to it (Y/N)? 3. Can you...

    $87 (Avg Bid)
    $87 平均入札額
    21 入札

    I need a bootloader for the STM32H750B-DK development board. The bootloader must be written with STM32CubeIDE and must contain the .IOC file When the board is turned on, if there is a valid application in the board's QSPI memory (dual bank), it starts it If there is no valid application or if the "user" key is pressed, the bootloader must allow the loading of a new firmware (.xip file) from the PC to the QSPI memory (dual bank) via USB CDC Once the file has been uploaded, you must launch the application It is sufficient that we establish a serial communication protocol, I will take care of creating the PC software for choosing and sending the .xip file to be sent to the board.

    $211 (Avg Bid)
    $211 平均入札額
    14 入札

    I am looking for an expert in embedded Linux, specifically Yocto Poky, to make some essential customizations to my BeagleBone Black device. The project includes: • Kernel configuration • Bootloader customization • Device driver integration In-depth experience related to WiFi modules, Dlpdlcr2000EVM Driver, I2C, I2S, and SPI Drivers are crucial for this task as these are the specific hardware components we will be working with. Apart from these, I would also like to introduce some changes to the user interface for improved navigation and accessibility. Professional experience in UI customization would be beneficial. I am expecting reliable, high-quality work from a freelancer with profound knowledge of these specific areas. A strong history of similar past project...

    $733 (Avg Bid)
    $733 平均入札額
    6 入札

    I'm in search of an experienced developer well-versed with STM32CubeIDE and C programming. The project is centred around STM32F411 hardware. I tried using ...Expectations: - The functionality of the left mouse button will solely be to read a click action. No need for dragging, scrolling or any other interaction. - The whole project is to be executed using C as the programming language. Skills Needed: - Proficient in STM32CubeIDE - Proficient in C Programming - Knowledge of Hardware Integration - Experience with USBX Integration (Standalone or using ThreadX) STM32F411 black pill board does not have a VBUS option so mouse is powered externally. No need to worry about VBUS. This is basically a bare bones USBX host implementation so should be quick and easy to do for someone w...

    $156 (Avg Bid)
    $156 平均入札額
    11 入札

    I'm currently struggling with a boot issue on Linux Mint 21.3 Cinnamon. I've been trying to repair it using a live USB and have run both boot-repair and gparted. However, I can't access the GRUB bootloader since my SSD only boots to UEFI. See the screenshot of the live usb running gparted. I think I need to reformat the unallocated disk bot maybe? The exact issue I'm dealing with is that the system only boots to UEFI. As such, the ideal freelancer should be able to: - Understand and have experience navigating UEFI systems - Have expertise in repairing bootloader issues - Have experience with Linux Mint 21.3 Cinnamon and recovery methods Any available assistance would be greatly appreciated to help rectify this and get my system booting properly again. ...

    $24 (Avg Bid)
    $24 平均入札額
    4 入札

    Hello I have a project need to have a bootloader to do a firmware upgrade via UART0, can use mcuboot to do it

    $121 (Avg Bid)
    $121 平均入札額
    18 入札

    Project Description: I am looking for a skilled developer who can help me with locking the bootloader of my OnePlus Nord 3 device while preserving root access. Here are the project requirements: Code : Device Information: - Brand and model: OnePlus Nord 3 Data/Settings Preservation: - I do not need to preserve any specific data or settings on my device. Current Device State: - The device is not rooted but the bootloader is unlocked. Skills and Experience Required: - Strong knowledge and experience in Android device customization and rooting. - Proficiency in bootloader locking and preserving root access. - Familiarity with OnePlus devices and their specific requirements. - Ability to work with the OnePlus Nord 3 model specifically. Please note

    $351 (Avg Bid)
    $351 平均入札額
    11 入札

    I am looking for a skilled developer with experience in Yocto to modify and compile at91bootstrap and...developer with experience in Yocto to modify and compile at91bootstrap and u-boot bootloaders and kernel source. The specific modifications needed include: - Change RGB LED settings in order to modify the color boot sequence - Adding custom drivers - Implementing security patches The ideal candidate should have: - Strong knowledge and experience with Yocto - Proficiency in modifying and compiling bootloader and kernel source code - Familiarity with adding custom drivers and implementing security patches The project has a preferred timeline of completing within 1 week. However, if you have a flexible schedule and can meet the requirements within a different timeframe, please le...

    $194 (Avg Bid)
    緊急
    $194 平均入札額
    5 入札

    I have a project for Nordic nrf9160 MCU, I need UART base firmware upgrade bootloader code. It must UART0 ( the default port for AT command) and no MCUboot used Finally you need to provide the source code and UART communication protocol

    $148 (Avg Bid)
    $148 平均入札額
    20 入札
    Embedded C, C++ 終了 left

    Im looking for someone who can support me in coding. He/She must have string Embedded knowledge with C and C++ skills , Microcontroller knowledge, driver development, ADC knowledge, freeRTOS, data modeling, framework, bootloader exp.

    $1312 (Avg Bid)
    $1312 平均入札額
    19 入札

    Project Overview: We are seeking an experienced custom ROM developer to design a secure and feature-rich ROM for Google Pixel 5 & Samsung A20. The custom ROM should emphasize user privacy, security, and enhanced device controls. Key Features: Encrypted Local Storage: All data stored locally on the device should be encrypted. Lock Bootloader: Ensure the bootloader is locked to prevent unauthorized tampering. Remove Recovery System / Safe Mode: Eliminate options to access recovery mode or safe mode. Lock Firmware with Secure Keys: Ensure firmware can only be updated with secure keys. Isolated App Environment: Applications should run in isolated environments, ensuring inter-app security. Integrated VPN: A built-in VPN feature for secure browsing and data transmission. Brut...

    $750 - $1500
    シール NDA
    $750 - $1500
    2 入札

    hello ... i was given a locked pixel7 .... its alreadyn been attempted to factory reset .... i have no access to the phone to enable developer options and oem unlocking ... i simply wish to use the phone .... i plan to flash graphene os over it ...... so either unlock the bootloader .... or flash ota or factory image over the top of the android rom

    $80 (Avg Bid)
    $80 平均入札額
    16 入札

    I am in need of a bootloader for my STM32F405 which would allow for firmware updates over the air, as well as enable communication with a GSM module. I prefer to use a SIM7600 module. The bootloader doesn't need to have any specific features or functionalities--any standard features will suffice.

    $367 (Avg Bid)
    $367 平均入札額
    7 入札

    I'm looking for a freelance programmer / Software Engineer to prepare a Step by S...determined people - i.e. fuses and other security features on the ATSAMD51 will need to be employed. I do not want people to extract the program or code and then be able to upload it onto copied devices. I do not require write protect, only read protect. I have ATMEL Studio (on a PC) and a Segger J-Link Mini. I am happy to purchase additional software or equipment as needed. In the past, I put a Bootloader on the chip with ATMEL Studio and the J-Link; but, then used the Arduino IDE to upload the programmer via a USB. I would like the process to be on a word doc, be very clear, step by step and preferably have photos as part of the explanations. The successful applicant may have lots of fol...

    $284 (Avg Bid)
    $284 平均入札額
    16 入札

    I am looking for a freelancer who can assist me with the u-boot-tools and uploading the Openstage 20E SIP Firmware. I require help with both tasks. Specifically, I have a specific version of the firmware that I want to upload, so I will provide the necessary files for this. I want to ensure that I have all the necessary hardware and cables to connect the device for uploading the firmware, and I can confirm that I have already obtained them. Ideal skills and experience for this job include: - Proficiency in u-boot-tools and firmware uploading - Knowledge of Openstage 20E SIP Firmware - Familiarity with hardware and cable connections for firmware uploading If you have the necessary expertise and experience in these areas, please bid on this project.

    $10 - $30
    $10 - $30
    0 入札

    I am looking for a freelancer who can help me with unlocking my Google Pixel 7 or flashing it back to factory settings. The bootloader for my device is currently locked. Skills and Experience: - Experience with unlocking bootloaders and flashing devices - Knowledge of Google Pixel devices and their specific requirements - Familiarity with the process of unlocking bootloaders and flashing devices back to factory settings Please note that I only require one of these actions to be performed on my Google Pixel 7.

    $17 (Avg Bid)
    $17 平均入札額
    2 入札

    I'm looking for an experienced freelancer to add FIPS to my bootloader. I am currently using GRUB for my bootloader, and I need to install additional components for the FIPS installation. The type of FIPS that I need is FIPS 140-2. This project requires in-depth knowledge and experience with FIPS compliance. If you think you can do the job, I'd be glad to hear from you.

    $397 (Avg Bid)
    $397 平均入札額
    9 入札

    Project Title: Bootloader For Renesas RL78 mcu Description: I am looking for a skilled developer to create a bootloader for the Renesas RL78 mcu. The ideal candidate should have experience with Renesas RL78 mcu and be familiar with the development environment. bootloader code is ready need help for run application code through it Specific Features: - UART communication: The bootloader should support UART communication for firmware updates and debugging purposes. MCU's Flash Memory: - The flash memory size of the MCU is 256KB. Hardware Platform Support: - The bootloader should be compatible with the On Chip Debugger Interface for seamless integration with the existing hardware platform. If you have experience in developing bootloaders and are fa...

    $9 / hr (Avg Bid)
    $9 / hr 平均入札額
    4 入札

    ...of an experienced Android developer who has knowledge and experience with unlocking the bootloader on a Mediatek chip Android device. Requirements: - Must have experience working with Mediatek chip Android devices - Knowledge and understanding of the bootloader unlocking process - Familiarity with the specific make and model of the Android device - Ability to troubleshoot and resolve any issues that may arise during the bootloader unlocking process Responsibilities: - Unlock the bootloader on the specified Mediatek chip Android device - Provide detailed instructions and guidance on the process for future reference - Ensure that the device remains fully functional and operational after the bootloader is unlocked Skills and Experience: - Strong under...

    $182 (Avg Bid)
    $182 平均入札額
    23 入札

    I need someone who have experience in avoiding root detection on android. There is android app that can detect almost all roots that i have already tested (Magisk, Magisk delta, shamiko, safetynet fix), when i open it, it is closing immediately with message that its detects magisk / unlocked bootloader. I test it on various of Google Pixel smartphones (from GP 1 to 5, from android 8 to android 12) So, the main goal is to have root and make possible to successful run the app.

    $150 (Avg Bid)
    $150 平均入札額
    28 入札

    I am looking for an experienced embedded Linux developer to help me with my project. The target hardware platform is the Raspberry Pi, and I need a custom bootloader with features for network booting, encryption support, as well as an IP discovery tool. The project must be completed within 3 months. I need a talented developer who can leverage the Yocto project to create the custom bootloader and get it up and running. The bootloader should be tailored to the specific needs of my project. Furthermore, I would like support for debugging capabilities should any issues arise during the development cycle. I'm looking for a reliable and experienced developer who can work within my specified timeframe and deliver an exceptional product. If you think you have the ...

    $8935 (Avg Bid)
    $8935 平均入札額
    17 入札

    ... Responsibilities: Design and develop a secure and efficient bootloader for the STM32L151CCT6 microcontroller, which will reside in a separate partition in the flash memory. Create three separate sections within the device's flash memory: one for the bootloader, one for the currently running application firmware, and one for incoming firmware updates. Implement a mechanism in the bootloader to verify the integrity of the new firmware before applying the update, such as a checksum or CRC. Develop an OTA update mechanism that can receive and store incoming firmware updates (received via MQTT from AWS IoT Core) in the dedicated update partition of the flash memory, without disturbing the current firmware. Ensure the bootloader applies the new firmware ...

    $394 (Avg Bid)
    $394 平均入札額
    14 入札

    I am in need of assistance with bootloading my ATmega256 Arduino through the ICSP port. I have a specific bootloader in mind and require guidance in implementing it. I prefer to use a programming language other than C++ or Python. Additionally, the ATmega256 will be integrated into a device that falls under the "Other" category. Ideal skills and experience for this project include: - Extensive knowledge and experience with ATmega256 Arduino bootloading - Proficiency in a variety of programming languages - Experience integrating ATmega256 into devices beyond robotics or home automation

    $10 (Avg Bid)
    $10 平均入札額
    1 入札

    I tried a couple of days and I could not unlock the bootloader According to my researches, this version is made for Korean and unlock the bootloader is not possible: So I need your help with the validated steps to unlock the bootloader of this smartphone I'm using linux, I'm experienced with ADB, fastboot, TWRP, root, etc. In the past I flashed several androids, but this model is a challenge. The test, should be a video call using google meet in which you should guide my step by step to unlock the bootloader. I achieved only upgrade from android 6 to android 7

    $35 (Avg Bid)
    $35 平均入札額
    2 入札

    It needs network, control of DSP chips via I2C, presets, and UART and bootloader and firmware update process. We have the code for Freescale chip in C, and it works perfectly but code needs to be moved to STM. Please apply if you are experienced and confident.

    $1129 (Avg Bid)
    $1129 平均入札額
    33 入札

    I am looking for a Freelancer to help me set up an STM32 Arduino development environment. The processor architecture I am using is STM32. I'm not sure if I need a custom bootloader but I'm open to exploring the possibility. I want to set up either a Makefile or PlatformIO environment for this project. The person I hire should have experience working with both STM32 processors and the Arduino IDE. I'm looking for a reliable person to get this job done quickly and with quality.

    $56 / hr (Avg Bid)
    特集
    $56 / hr 平均入札額
    8 入札

    we have a magnetic strip reader. all the files and code is available in GITHUB. need to build the hex file and upload those in ATMEGA168 MCU github: need to be done ASAP. Write "I can do" on top of the BID. thanks

    $506 (Avg Bid)
    $506 平均入札額
    15 入札

    Searching for an embedded developer who will create a code for Zephyr RTOS which will do a firmware update over the bluetooth. On target device is Nordic Secure DFU client (Secure Bootloader) with BLE transport and we need the master which will run on another micro controller with Zephyr RTOS. The code should use standard Zephyr RTOS Bluetooth API. Image file will be stored on SD Card with FAT file system, but the code itself doesn't have to include communication with SD Card / FAT. Nordic Secure DFU protocol is described here: Here is the Android DFU Library in case it helps (the code we are looking for should have similar functionality as this library, but has to run on MCU with Zephyr

    $50 / hr (Avg Bid)
    $50 / hr 平均入札額
    5 入札

    Hello guys, I am trying to set up the UART bootloader on PIC32CM MC00 Nano Curiosity Board, via Harmony v3 MCC and MPLAB X 6.00. I need someone with experience in it to help me do it step by step, for the specific controller, and PC32 generally. Thanks

    $117 (Avg Bid)
    $117 平均入札額
    20 入札

    Hi, your email Flaplaud at does no longer work, I had a proposition for you.

    $50 (Avg Bid)
    $50 平均入札額
    1 入札

    need customized rom/firmware to android - Huawei Mediapad M3 Lite 10The bootloader will be unlocked specification. - When you connect the device - Huawei Mediapad M3 Lite 10 - to power it has to boot up(start up) automatically. - When you unplug power it has to show it shut down within 60 sec, and count down and then close the device. - When it starts up, it has to show a customized picture/animation. - When it is started up I have to run one specific app. - It should not show any comand-line on the screen and run the app in full screen mode. - The volume should be set to 100% always - If the app crash it has to start up the app again. -The app have built in so it use wi-fi and you can setup wi-fi network from the app - The app uses the front camera and store image on the...

    $1489 (Avg Bid)
    $1489 平均入札額
    27 入札

    Tricore Boot BSL and GPT Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and...Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and read passwords, and information in the unlocked state of the processor, Password lock Opening Calculation Special Bootloader and Source Codes. I want people who have experience in this subject ...

    $1138 (Avg Bid)
    $1138 平均入札額
    24 入札

    ...computer (SBC) ie. Raspberry Pi, a chargeable large capacity battery, buttons and touch screen. Expertise regarding the operating system (bootloader in particular), utilized by our chosen SBC for the project/s, would also be highly valued. As well as having personal hands-on experience with designing and creating similar projects. Please answer to this question (since we do not read offers that are created by automatic bots, so we ask something that has nothing to do with the business to see if the text is read by a human): is horse bigger than computer. currently the most critical things we need help with: • Raspberry pi & Libre Computer "Le Potato" bootloader adjustment to make it boot into company logo and retain logo until application lau...

    $16 / hr (Avg Bid)
    $16 / hr 平均入札額
    26 入札

    We need someone capable of unlocking MI 11T Devices without going to conventional process of waiting 170 hours....total number of devices is 50 device

    $500 (Avg Bid)
    $500 平均入札額
    3 入札

    I need help with reading analogue signal using Sparkplug / Micronucleus bootloader

    $26 (Avg Bid)
    $26 平均入札額
    11 入札

    Hi attached you will find the settings for the device, it is not a mobile phone, its an android for scanning and programming nfc tags only. no mobile carrier service required, but the rest of the services must work after unlocked wifi, bluetooth, nfc tag programming, upc laser scanner. would like the newest OS that can be installed f...like the newest OS that can be installed from android or and if custom rom is able to be installed. I have a pc and usb connection to device and its ready now. You must have had experience with ZEBRA TC70x devices since they are very difficult and specific methods for these devices. Please don't assume you know and test on this device and brick it. if you have ZEBRA Symbol experience unlocking bootloader only. see all info attached and message me...

    $19 (Avg Bid)
    $19 平均入札額
    6 入札

    I have a tablet that has custom firmware with a locked bootloader running Android 10. I would like assistance with unlocking the bootloader and loading standard Android 10 OS.

    $167 (Avg Bid)
    $167 平均入札額
    11 入札

    I have some hardware with an XMega32 running an application that I have written. I require the firmware to be upgradable over CANbus. I have a CAN bootloader that I believe will do what I require, I just need it integrated correctly into my existing setup and don't have time to complete it myself. I need someone with experience with bootloaders, ATXmega hardware, and microchip studio.

    $439 (Avg Bid)
    $439 平均入札額
    24 入札

    The result should be integration code for Nabto and ThreadX. We propose it done on an NXP MIMXRT1060-EVK (but other targets could also be discussed). Environment/Tools should be GCC and CMake. More on Nabto integration and the hence the tasks of the project can be found here: Integrations for FreeRTOS and Zephyr (and high-end operating systems) has already been done, so it should be a manageable task. We need to see documented ThreadX / Azure RTOS skills and knowledge, since we only have limited knowledge of this and our technical team is very busy.

    $1344 (Avg Bid)
    $1344 平均入札額
    14 入札

    1. setting up a cronjob that takes a picture from webcam anytime someone enters the guest user account 2. has putty ssh client booted at all times or another ssh server and this is invisible to the user 3. setting internet to automatically connect to any available wifi, or waiting for established internet connecti...to be invisible and not noticed by user 5. using a free geolocation api to grab exact geolocation/address where laptop is currently at and sending this information automatically to same ssh server the webcam picture and geolocation can be sent at the same time 6. having a keylogger running that is automatically sending new information whenever it is entered by the thief 7. creating a custom bootloader image that displays the name of the owner, address, and phone number ...

    $279 (Avg Bid)
    $279 平均入札額
    5 入札

    ...this is kim from korea i need a custom arduino board that has mega2560, uproading chip(ft232 or atmega16), micro-b usb connector the board size is 65mm x 70mm maximum and i need the way to uproad arduino bootloader on the board(atmega2560) and i have a pdf file that including pins arrangement and the pins use 1.25 pitch connector(ex, molex-53047) so in short mega custom board(just changing pins arrangement on the arduino mege mini pro board) board size is 65mm x 70mm maximum(less size is okay) board has 1.25mm pitch connectors 4.i need the way uproding bootloader best way is that you make gerber file and order the board and test it -but if you can't order the board just give me gerber file and i order the board and solder the board and test it thank you^^...

    $381 (Avg Bid)
    $381 平均入札額
    34 入札

    I am looking for experienced chap who has experience with micronucleus USB bootloader and digiCDC library. No time wasters please

    $116 (Avg Bid)
    $116 平均入札額
    3 入札

    Hey guys im thinking this is a impossible task. So long story short i had emui 11 on a stock Optus carrier phone. I decided to use Hiproxy and upgraded a beta version of emui 12 not realizing that google pay would not work. So i tried downgrading using hiproxy and now the phone tells me device has loaded a different operating system and im unable to fastboot due to not being able to enable the usb degging which i forgot to do.. I dont care about the data anymore but would be nice if it boots up

    $54 (Avg Bid)
    $54 平均入札額
    8 入札

    ...to create bootloader firmware file from the kernel enviroment we just require embedded firmware linux engineer to create firmware file and some extra configurations 1st flash: (modified files) , , , , , , ,, , , , , , , , , , , , , , , , , , , , , , , , , (doesn't include bootloader) - you can only detect jtag now; Create and install bootloader: https://github

    $626 (Avg Bid)
    $626 平均入札額
    10 入札

    ...read & debug jtag, next steam is to create bootloader firmware file from the kernel enviroment 1st flash: (modified files) , , , , , , ,, , , , , , , , , , , , , , , , , , , , , , , , , (doesn't include bootloader) - you can only detect jtag now; Create and install bootloader:

    $222 (Avg Bid)
    $222 平均入札額
    5 入札

    (1) SERIAL BOOTLOADER for PIC32MZ0512EFE064 (hex file + MPLAB X IDE PROJECT provided) : - UART 1 (PIN 56 / 57) - ENTER IN BOOTLOADER MODE WITH LONG PUSH ON RF5 WHEN THE HADWARE POWERUP (RF5 active low)  for information : the electrical hardware system start with the button, it's an button for an electrical powerup and in the same time give the state of RF5 (when active state low). - Provide hex file + MPLAB X IDE PROJECT + harmony if necessary (2) BOOTLOADER HOST APPLICATION (native file, project provided) : - Windows command line application (minimum) or visual basic, or C#, or java, or C++ - option area for a picture or logo integrated to the BOOTLOADER HOST APPLICATION - Provide native source project and application in object format ********** PIC32...

    $199 (Avg Bid)
    $199 平均入札額
    13 入札

    Task is to create a demo of a bootloader system for Arduino Mega 2560. Its mainly a execution of the "MMC_SD Bootloader für AT Mega – " link. Attached you will find and Blink2.ino. These files should be able to install by SD card. Please check attachements and Blink2.ino. If you dont have Arduino Mega2560, please let me know, we can ship one to you. How the task will be tested: 1. Connect to Arduino Mega 2560 by USB 2. Upload your bootloader to Mega2560 by using Arduino IDE (or what you recommend) 3. Upload to Mega2560 by using Arduino IDE (or what your recommend) 4. Copy to SD card (or as Hex file if needed, it will called *.ino for better understanding in test) 5. Plug SD card into Mega2560 6. Reboot Mega2560 > it will

    $161 (Avg Bid)
    $161 平均入札額
    13 入札

    The project consist to build OTA firmware on MPLab to work on my own board based on WIFI32E01 chip. The application must try to connect with the defined server address and d...consist to build OTA firmware on MPLab to work on my own board based on WIFI32E01 chip. The application must try to connect with the defined server address and download the new image. The downloaded image must be stored in the external flash (Winbond W25Q16JVZPIQ) initially. Application must reset the device to run new image once image is successfully downloaded from server. When device is reset ,bootloader must try to program the image from the external flash and if programming is successful ,downloaded image from the server must be executed . This code must be merge with MPLab code already code in the G...

    $105 (Avg Bid)
    $105 平均入札額
    8 入札

    I want a boot2Gecko bootloader for a JavaScript emulator running Linux() for android Oreo for a google glass app that need video selection & playback, google hangout api, video recording, audio recording, video/audio recording, JavaScript data storage, and server uploads.

    $497 (Avg Bid)
    $497 平均入札額
    33 入札