絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    436 soldering 仕事が見つかりました。次の価格: USD

    I need somebody with tools and skills to perform some basic USB and Ethernet connection soldering directly on the board. This project is for LONDON ONLY. I will need to meet you in person to give you the boards that needs to be done.

    $110 (Avg Bid)
    $110 平均入札額
    2 入札

    Hey, I need a proper copy of a PCB which is 2,6cm*1,1cm, on the PCB there are 2 soldering pads and 3 other parts.

    $26 (Avg Bid)
    $26 平均入札額
    6 入札

    Hi, I need an electronics person to tell me a simple and cost-effective way to slow down a noisy air-con 3 speed motor (refer picture attached). It's 230v and has 5 wires from it (presumable no capacitor). If possible to buy any part(s) online from Amazon or similar site. I can use a soldering iron!

    $28 (Avg Bid)
    $28 平均入札額
    3 入札

    I currently take apart drones to use the parts for my repairs, and post some off directly to customers. I would like someone who is competent in electronics repairs or something, so that they can easily take apart drones (its mainly just unscrewing things with a bit of desoldering). I am looking for someone to do regular part time work for me in receiving drones, disassembling them and labelling u...

    $15 / hr (Avg Bid)
    $15 / hr 平均入札額
    1 入札

    Using this tutorial as a base for the project - [ログインしてURLを表示] - update to use a MCP23017 GPIO expander (I2C device) - and add digital read/write to code. Using the adafruit MCP23017 ("Adafruit_MCP23017.h") library (and wire.h or similar library if needed to map I2C pins). Using this board - [ログインしてURLを表示] . Need to map I2C (SDA and SCL pins - suggested using pins 12/SDA and 14/SCL ...

    $169 (Avg Bid)
    $169 平均入札額
    23 入札

    Design, provide parts list and project files, etc necessary for a PCB printing service to print and SMT Assemble. This will be used in a VR Hobby project which uses a Qualcomm Snapdragon 821 SoC. Only a small quantity will be required. Components should be selected that are widely available and cost effective. Making sure they are available for SMT Assembly by JLCPCB or similar firm. &bul...

    $19 (Avg Bid)
    $19 平均入札額
    4 入札

    Small manufacturer of micro connectors needs part time, job based hand soldering for cable assemblies

    $1125 (Avg Bid)
    $1125 平均入札額
    1 入札

    I need someone who works with gold , experienced to prepare rings : 100$ per ring

    $30 - $250
    $30 - $250
    0 入札

    Looking for freelance Module assembly and testing task provider, that include soldering, Job location in Johor Bahru or Singapore

    $463 (Avg Bid)
    $463 平均入札額
    3 入札

    Deliverable: Design a PCB for a simple circuit using surface mount components. Simulate the circuit to ensure the PCB design is functional and provide a final bill of materials (BOM) for parts needed. I am a PhD student and the project lead. We have designed a simple circuit which uses an Arduino Pro Mini (3.3v 8Mhz) and a couple through-hole components (1 RTC board, 2 transistors, 2 resistors). ...

    $165 (Avg Bid)
    $165 平均入札額
    33 入札

    I require the Complete PCB design and Firmware for the following: RF Transmitter: 434,000 MHz PCB to fit pre-designed enclosure Battery Operated 3V CR2032 Preferred Transmitter power >10dBm Minimum Standby Current draw <10nA PCB solder bridge to select Channel 1 or 2 Channel Selection done via a soldering bridge. Eg. Channel 1 J1, Channel 2 J2 Each Transmitter should be unique as to not int...

    $712 (Avg Bid)
    $712 平均入札額
    16 入札

    To design and build prototype of full solid-state static voltage stabilizer using IGBT/ MOSFET in PWM AC Chopper/Inverter topology with Buck Boost Transformer with any suitable DSP IC # Deliverables WORKER MUST PROVIDE : 1. Complete and detailed Schematic Diagram of the product. 2. Complete artwork of the PCB including laser print out of the tracks and pads, laser print out of component layou...

    $1855 (Avg Bid)
    $1855 平均入札額
    3 入札

    soldering [ログインしてURLを表示] bga assembly programming soldering inspection

    $4 / hr (Avg Bid)
    $4 / hr 平均入札額
    2 入札
    Sony TV repair 終了 left

    I have a broken LCD TV panel on my Sony KDL 50W805B. Can't find anywhere where to buy the panel for this model. I'm sufficiently skilled in soldering and repairing to follow instructions to install in it a LED panel (and other driving board?), instead of the original LCD panel, if you have the know-how.

    $172 (Avg Bid)
    $172 平均入札額
    3 入札

    soldering up small microcontroller boards for a field trial. Needs to be located withing 40km of nong wua so or udon thani in thailand

    $2250 (Avg Bid)
    $2250 平均入札額
    4 入札

    I' m planing an YouTube Channel Spacenerds. One Part is Makerspace all things about the Maker Szene. The Other one ist a about Space, Stars, planets. I want a Logo with a Space Theme, a group (5 people) with Spacesuits and armed with soldering Iron. Drilling Machines, Hot glue gun, Open wrench. The Text Spacenerds in the bottom maybe on a Planet, where they all.

    $59 (Avg Bid)
    $59 平均入札額
    28 入札
    Trophy icon Design Logo - 29/09/2019 15:30 EDT 終了 left

    Hey Everyone , i have small repair shop and web site for mall-in-repair I'm specialist in Mobile motherboard repair (micro soldering) I'm looking for a logo Brand Name : Hamad Fix check this picture maybe help you

    $69 (Avg Bid)
    保証
    $69
    365 エントリー
    Soldering work 終了 left

    We need an experienced soldering person for a week's long time. Working location is in Madil, near Marol Naka metro station.

    $152 (Avg Bid)
    $152 平均入札額
    5 入札

    We are looking for a talented and driven hands on Electrical Engineer who will be part of creating an incredible cutting edge technology system. And will focus on the design, construction, and troubleshooting of compact and reliable embedded electrical systems . This includes electrical sub-system design, integration, PCB layout, and frequent hands-on work in lab building and debugging electrical ...

    $35 / hr (Avg Bid)
    $35 / hr 平均入札額
    32 入札

    I currently take apart drones to use the parts for my repairs, and post some off directly to customers. I would like someone who is competent in doing repairs of drones. I am looking for someone to do regular part time work for me in receiving drones, disassembling them and labelling up the parts and storing them. You will then be required to post the parts off to different customers as and when y...

    $15 / hr (Avg Bid)
    $15 / hr 平均入札額
    4 入札

    Requirement: I would like assistance from someone who has the skills to create a coin scanning solution which can detect all Australian coins and feed the data back to an android application via blue-tooth signalling (application will be developed to suit the output from the coin scanner) Design, build instruction and physical prototype will be required as the output of this task (I will consider...

    $3082 (Avg Bid)
    $3082 平均入札額
    4 入札

    I currently take apart drones to use the parts for my repairs, and post some off directly to customers. I would like someone who is vaguely competent in electronics repairs or something, so that they can easily take apart drones (its mainly just unscrewing things with a bit of desoldering). I am looking for someone to do regular part time work for me in receiving drones, disassembling them and la...

    $21 / hr (Avg Bid)
    $21 / hr 平均入札額
    2 入札

    We are seeking an experienced (2 years or more) electronics engineer to perform a component and circuit board test on a single smart metering circuit board and associated components. The engineer is to receive board and components from vendor in China, perform testing, and send board and components to USA after testing is completed. The engineer should have all the necessary computer serial interf...

    $180 (Avg Bid)
    $180 平均入札額
    10 入札

    We are leading aerospace company specializing in the design and manufacture of autonomous Unmanned Aerial Systems (UAS) for security organizations, defence & first responders. We do not develop just products, but up-scale solution to enhance human capabilities by allowing us to be more faster, more precise and more responsive to challenges and how to solve it. We are looking for Electronic E...

    $1295 (Avg Bid)
    $1295 平均入札額
    28 入札

    I need a very simple circuit board designing in a form that is complete for low volume manufacture. The board really is not much more than a busbar - inputs are 24V and 0V supply via screw down pcb mount terminal block. There will be three rows of 8 screw terminal blocks - lets call them A, B and C. All connections in row A will be +24V, all the B 0V and all the C + 5V. Thus I get 8 possible p...

    $98 (Avg Bid)
    $98 平均入札額
    36 入札
    Technician 終了 left

    looking for an expert, who have good experience in soldering PCB devices

    $17 (Avg Bid)
    $17 平均入札額
    4 入札

    We need a USB power cable replaced on a few device of ours. Detailed instructions will be provided. The job will require a soldering station, glue gun , screw drivers & zip ties. New power cables will be provided by us, any consumables can be directly charged to us. It would approximately require 10 minutes of end to end process time for each individual unit. We can provide a desk for workin...

    $400 (Avg Bid)
    $400 平均入札額
    5 入札
    3D engineer 終了 left

    I want to make a small octahedral device, that will contain small buttons on each of the faces and, cap for a battery and on the inside a housing to insert a breakoutboard (11.15mm x 16.5mm). It has to be 3d printed and the parts should be assembled so as to make it possible to house the components in a way soldering is The buttons foot print is 5x6.5 mm

    $134 (Avg Bid)
    $134 平均入札額
    27 入札

    Goal: A working acoustic altimeter for paragliding (Called Variometer) My situation: I already have printed PCBs, Eagle files and all the necessary parts for it. I need someone who can solder the parts on the PCB and upload the code. So i can try it in the air. I tried soldering a prototype but it was too small for me. Not used to tiny SMD parts. The circuit is based on a Atmega328. It has aro...

    $167 (Avg Bid)
    $167 平均入札額
    20 入札

    Hi, i hope you can help me out. My situation: I tried soldering a prototype but it was too small for me. Not used to tiny SMD parts. I have printed PCBs, Eagle files and all the necessary parts for it. I need someone who can solder the parts on it and upload the code. So i can do a testrun. The product is a accoustic variometer for paragliding which is based on a Atmega328. It has around 20 par...

    $50 (Avg Bid)
    $50 平均入札額
    1 入札

    Hi Indir O., I noticed your profile and would like to offer you my project. My situation: I tried soldering a prototype but it was too small for me. Not used to tiny SMD parts. I have a printed PCB, Eagle files and all the necessary parts for it. I need someone who can solder the parts on it and do some testing if it works. The product is a accoustic variometer for paragliding which is based on ...

    $50 (Avg Bid)
    $50 平均入札額
    1 入札

    Hi, I'm basically looking to simplify an existing PCB design powered by 2 x AAs. It's currently a motion sensor that flashes a LED for a few seconds, then runs the motor one way then the other. What I would like is the exact same thing but without the time delay. So requirements would be: - PIR picks up movement - Motor turns one way for approx 1 second then runs the other way for 1/4 ...

    $42 (Avg Bid)
    $42 平均入札額
    16 入札

    I Need an Expert in soldering for Smartphone

    $25 (Avg Bid)
    $25 平均入札額
    1 入札

    built 10 or more small plastic enclosure box with off the shelf circuits wifi, battery charge controller, push on switches and battery. some soldering requiere. we will provide all the materials sent from aliexpress. We are open to suggestions for final parts. we will pay shipping to our location for the finished boxes

    $25 (Avg Bid)
    $25 平均入札額
    8 入札

    [Update] Pls check repository, lib has been written, only gui part is left for implementation [ログインしてURLを表示] Based on our soldering robot project (modified 3d printer), we would like to transform the existing python code (kivy, python, opencv, pcb-tools) into a platform to scan assembled pcb. In this project, we program the scanner platform: 1) teach in PCB from pic & place file (CAD created...

    $522 (Avg Bid)
    $522 平均入札額
    19 入札

    We are looking to create a PCI-e expansion board based on a PEX8796 chip. The desired function is to connect 5 PCI-e x16 gen 3.0 devices on the board, the lanes are routed to the chip and allows for communication with 1 PCI-e slot to a main motherboard. (similar to the board in attachment). An NDA is to be signed to provide the needed confidential information about the Broadcom chips. Experience ...

    $2670 (Avg Bid)
    $2670 平均入札額
    17 入札

    For our projects we looking building an simple application to control modified 3d printer as soldering robot. Inspired from the following modification. [ログインしてURLを表示] The application will be written in python 3 and published as open source under the following link: [ログインしてURLを表示] It contains the following features: - It has a simple gui (e.g. Tkinter) to read gerber or nc-drill file with pcb-too...

    $263 (Avg Bid)
    $263 平均入札額
    3 入札

    For our projects we would like to have a simple automated assembling inspection of a pcb with python script. In a first step we will use images, later we will improve the concept to use hdmi frame grabber card. Several pictures of the pcb are given to the script and it must inspect the pcb. If a criteria is violated, the component and/or soldering pad in question must be marked on the image. Inspe...

    $238 (Avg Bid)
    $238 平均入札額
    11 入札

    The project requires 3 different parts: 1. The PCB in order to control the "Weller RT" tips. This controlling board should be small and under the format of a pen. (See links) The main features of this board should be: - Bluetooth connectivity, such as the main way to control the board and adjust the temperature is over a smartphone within an app. - USB Type C connector, so that any la...

    $1027 (Avg Bid)
    $1027 平均入札額
    18 入札

    We are a manufacturer to produce cable processing machines such as wire terminal crimping machines, USB soldering machines, thermocouple welding machines, cable cutting and stripping machines and on. Our prices are competitive and quality is good. We want to find sales representative all over, in every destination where it is posible, to carry on the job of local sales agents. Before establishin...

    $2500 (Avg Bid)
    $2500 平均入札額
    2 入札

    I'm searching for an electrician, in the area of Europe (or from the land of cheap shipping) to make me possibly large (10-200pcs) quantities of project parts that require soldering. The Image attached contains all the visual information about the orientation of the parts. All the components are listed and linked in the bottom of the project description, to be acquired by the maker. The bat...

    $1310 (Avg Bid)
    $1310 平均入札額
    3 入札

    I am looking for someone to lay out a simple (dummy) PCB for soldering practice for students. Ideally if will have 0603, 0805, 1206, SOT-23, SOP-8, SOP-24 and a few through hole parts.

    $105 (Avg Bid)
    $105 平均入札額
    53 入札

    As a fintech IOT company which is incubated in NASSCOM, we have access to one of the best hardware labs in town. We are hiring a team of dedicated and smart individuals for our venture - a company is what the people working in it make it. As is the case with most startups, those who join in early get rewarded earlier. We are a funded venture, started by industry veterans, and we are committed to m...

    $1231 (Avg Bid)
    $1231 平均入札額
    11 入札

    As a fintech IOT company which is incubated in NASSCOM, we have access to one of the best hardware labs in town. We are hiring a team of dedicated and smart individuals for our venture - a company is what the people working in it make it. As is the case with most startups, those who join in early get rewarded earlier. We are a funded venture, started by industry veterans, and we are committed to m...

    $14 / hr (Avg Bid)
    $14 / hr 平均入札額
    15 入札

    I need a circuit that transmitt on the 27Mhz Band, multichannel that i can select different channels by soldering som 0Ohm resistors, with an output power of 4w and that should work from 9.5Volts to 14Volts outputting same power on all of them, at the bottom of the circuit i need a PTT pad, Power supply Pad, Grond Pad and RXD Pad, one of the most important requirements is that the harmonics must b...

    $263 (Avg Bid)
    $263 平均入札額
    10 入札

    We are looking to prototype a BLDC outrunner motor. We would like to use standard stator diameters from JIAYE Stator. We are leaning towards the 80mm stator with 30-35mm of height. This is where your work would come in :) We have made some 3D Models of the motor but need to determine the starting specifications so we can have the stator constructed and would by JIAYE, the magnets ordered, and th...

    $19 / hr (Avg Bid)
    $19 / hr 平均入札額
    2 入札
    PCB design 終了 left

    We need to design 2 (two) PCB versions for 2 sensors: 1) For Bosch bme280 2) For SHT31-ARP-B It needs to be: 1) PCB should be narrow 2) With soldering pads for SPI/I2C 3) Delivered by 04. March 2019 Deliverables: Gerber files.

    $172 (Avg Bid)
    $172 平均入札額
    35 入札

    What's your charge for 1000 words? Looking for talented and creative writers that can provide informative. These topics are about hand tools, welding, soldering, engineering equipment etc.

    $77 (Avg Bid)
    $77 平均入札額
    40 入札

    Rate CAD $10 - $15 per hour I am looking for someone to repair drones for our drone parts website as we are having a large number of requests for repairs, but we don't yet have a technician. Whenever we have a request for a drone repair I will get the customer to ship their drone to you and I will post you the correct parts. You then will have a few days to repair it (it will just be swappin...

    $10 / hr (Avg Bid)
    $10 / hr 平均入札額
    6 入札

    We have some PCB repairing work in BANGALORE. There are 3 PCB. In one PCB a 12V DC 2Amp adapter is damaged. You need to change that. In another 2 PCB a wire is loose you need to solder the wire back to PCB. THIS IS AN ON SITE PROJECT. You need to go to client location in Domlur and fix the PCB. Things you will need. 1) Multimeter 2) 1 12 V DC 2 Amp Adapter( We will pay for this.) 3) Soldering rod...

    $114 (Avg Bid)
    $114 平均入札額
    4 入札