Raspberry ketone articles仕事

絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    5,373 raspberry ketone articles 仕事が見つかりました。次の価格: USD

    Programación Javascrip para realiza una conexión entre mi raspberry pi y la nube

    $545 (Avg Bid)
    $545 平均入札額
    6 入札
    Arduino, raspberry pi, pyton 6 日 left
    認証完了

    I need some consulting, and maybe cooding.

    $36 (Avg Bid)
    $36 平均入札額
    14 入札

    Need only schematic design and BOM file using Altium Designer. I want to make POE circuit design for Raspberry Pi 3. It must be capable of supplying over 70W power for the device to be controlled. Relevant freelancer who can handle this project smoothly will be awarded PCB design by next project. Thanks.

    $80 (Avg Bid)
    $80 平均入札額
    2 入札

    I will need this done within around 24 hours. I code as a hobby and searched this challenge online.

    $100 (Avg Bid)
    $100 平均入札額
    1 入札

    We want to send existing code instructions from Raspberry to two arduino mega. The instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move simultaneously.

    $105 (Avg Bid)
    $105 平均入札額
    15 入札

    ...need to have a website build for a appliance unit (like a raspberry pi) The web portal should have the following features; A) Ability to change the internal IP on the appliance itself and be persistent after a reboot. - (similar to the features on a wifi/Router) - must be validated on a raspberry pi. B) Must be able to run various python/Bash scripts

    $120 (Avg Bid)
    $120 平均入札額
    12 入札

    I have a project based on raspberry pi 3. I want to make PCB design to customized the raspberry pi board by adding some components/Module in it and also to remove some of unwanted things from raspberry board.

    $224 (Avg Bid)
    $224 平均入札額
    8 入札
    Optimize a case for my raspberry 4 日 left
    認証完了

    Hi, I have files to print a case for my raspberry. I would like that you optimize this files. Currently, it is a box very rectangular. I would like something more like a circle or a shape more nice. I will fix this home on a pole. I would like a protection for the camera location like a cap but take care, this protection doesn't disturb the camera

    $40 (Avg Bid)
    $40 平均入札額
    16 入札

    I like to have a system which works as a GPS tracker and also displays and does announcement of upcoming station.

    $112 (Avg Bid)
    $112 平均入札額
    4 入札
    DJI TB55 Battery Communication 4 日 left
    認証完了

    ...designed (ie I want to use these batteries in another device for both charging and discharging other than the drone or chargers designed by DJI). My device will use either the Raspberry Pi 3 b+ or the Arduino ESP32 microprocessor so communication must match / be capable by these two devices. Quote must include all time and materials entirely. (If you need

    $1669 (Avg Bid)
    $1669 平均入札額
    14 入札

    ...with the detailed planning of the application and also with its subsequent execution. What's going on: Digital Signage for raspberry PI and central server General description of features: - Distribution of Content to Raspberry PI - Content Playback Scheduler - Register the player and assign a Group - Upload media files or add links - Create a playlist

    $2074 (Avg Bid)
    $2074 平均入札額
    12 入札

    ...on the Raspberry Pie and not on a server. We have implemented tiny-Yolo for objected detection, but we have some problems loading the darknet Yolo model. The problem is that the Pi3 B+ has limited resources. Tracking is taking a lot of resources and for improving the speed we are working on making multitracking from all four cores of raspberry pi separately

    $12 / hr (Avg Bid)
    $12 / hr 平均入札額
    11 入札

    ...0 Custom Gamepad PCB of Adafruit and with the indicated dimensions and with the buttons of start and select in the same place of the photo, since it is to connect it to a Raspberry Pi zero W, or make yours by yourself. The printing of the PCB: I do not know where to do it and I do not know if you could do it (I would pay you more money). And if in this

    $26 (Avg Bid)
    $26 平均入札額
    9 入札

    We need to integrate an asterisk pbx with SuiteCRM if possible with freepbx or raspbx Integration means: - On inbound call open CRM calling contact information - Clicktocall from CRM - Logg inbound and outbound calls in CRM

    $975 (Avg Bid)
    $975 平均入札額
    16 入札

    I am looking for a python script/some kind of setup that will take audio from a microphone convert it to text and then send it to a sign to be shown. This HAS to ...for a python script/some kind of setup that will take audio from a microphone convert it to text and then send it to a sign to be shown. This HAS to be able to be run on a Raspberry Pi 3B+

    $172 (Avg Bid)
    $172 平均入札額
    19 入札

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board

    $452 (Avg Bid)
    $452 平均入札額
    31 入札

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board

    $332 (Avg Bid)
    $332 平均入札額
    10 入札

    part list of components : SS49 linear hall sensors CD74HC4067M 16 to 1 multiplexer mcp3002 DAC Raspberry pi 3 40 pin header connector. please find attached pdf files with datasheets of the parts that i need. I need every type is in the datasheets DIP, SOIC ect.

    $95 (Avg Bid)
    $95 平均入札額
    3 入札

    I am looking for a developer with raspberry pi experience to help with a simple project. We need to build a raspberry pi based device. The device should boot with no indication of being a raspberry pi (on the display). Once it is completely booted it should automatically launch an HTML web page and display it. The user should not be able to exit the

    $550 (Avg Bid)
    $550 平均入札額
    29 入札

    ...and send text messages of course the raspberry pi has to use a usb sound card for mic=Rx, speaker=Tx. so the idea is to have a Raspbeerry pi with an lcd module on, there will be 16 ss49 linear hall effect sensors that will sent their signal to an ADC so it provide the values to one of the pins of the raspberry pi. the use of the 16 sensors will be

    $140 (Avg Bid)
    $140 平均入札額
    3 入札

    Hello, I would like to hire a software developer for this project. I wan to use the Raspberry pi 3 to run the code with 8 channel relays to control the motor for automation at home. I will discuss the project in more details, but for now, the person that I hire MUST have the following experiences. Java Python Work with 8 channel relays before with

    $217 (Avg Bid)
    $217 平均入札額
    23 入札

    I have a Raspberry PI connected to a PiR Motion sensor and I need to analyze the data real time on Power BI. I have a Python Script (attached below) to run on the Raspberry PI, however I am trying to get the data from my Pi to Power BI to visualize the time stamp of motion detected throughout the day and the total activity of that day. Please help

    $245 (Avg Bid)
    $245 平均入札額
    12 入札
    GPS tracker 16 時間 left

    Build a GPS tracker using raspberry pi and an iridium module using python. Transmit compressed message to API.  Update message frequency remotely.

    $3863 (Avg Bid)
    $3863 平均入札額
    30 入札

    ...html) The board has been designed to send information via the AD7797 to the Raspberry Pi. The only driver we can find is a C driver at [ログインしてURLを表示] We need to have the equivalent to use with Python on the Raspberry Pi 3b+. Payment will be released when the driver is working on our board. At

    $242 (Avg Bid)
    $242 平均入札額
    16 入札

    I have a CNC plasma profile cutting machine that has 3x motors 2x are step motors 1x is plain electric DC motor. I want to replace the original controller with a raspberry pi so it is an integrated unit with better open source capability and is then easily accessible to files via wifi on the network. Attached are the photos of the machine and some

    $12 / hr (Avg Bid)
    $12 / hr 平均入札額
    7 入札

    ...interface a. Based on existing source code and continue developing to complete integration between access control systems via C#, datapoint servers, virtual machine and Raspberry Pi. Including testing. 2 weeks b. Build management documentation with versions including source code documentation for item a. 1 week. d. Attend project meeting with customer

    $10519 (Avg Bid)
    地方
    $10519 平均入札額
    8 入札

    I would like to have a Raspberry setted up as a proxy (squid should be a good choice), to the raspberry i will attach "X" USB 4G dongles and i want a proxy made out of each usb attached, with his own username and password and i want to be able to access them from my vps. https preferred I would love to have the option to disconnect the dongles or reset

    $226 (Avg Bid)
    $226 平均入札額
    4 入札

    We want to send existing code instructions from Raspberry to two arduino mega. The instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move simultaneously.

    $21 (Avg Bid)
    $21 平均入札額
    7 入札

    We have a hardware (possibly Raspberry Pi) project. Can we discuss it with you?

    $175 (Avg Bid)
    $175 平均入札額
    1 入札

    I would Like to read informataion from my Landis+Gyr smart meter to a web server using Arduino or Raspberry Pi and DLMS COSEM. The scope of this project will include writing the program to read Energy consumption from smart meter. Send the read information over the internet to a remote server. The program should be able to receive remote command

    $551 (Avg Bid)
    $551 平均入札額
    6 入札

    ...website. General conditions: - The program should later be compiled and run under Linux on PCs (Ubuntu 18.04 64bit, a normal PC) as well as on an embedded boards like the Raspberry Pi or Beaglebone (ARM). - The program is a pure console program, a graphical user interface is not necessary. - Handing over the complete source code with all dependencies

    $717 (Avg Bid)
    $717 平均入札額
    7 入札

    We need a program for raspberry pi which will connect the retailer pos printer to itself and capture the receipt data (from a serial port) and save them as a plain text or JSON object. Once the data is being saved we will then format it the way we specify and then use this data to send it to our server, where it will be added to the user account. This

    $877 (Avg Bid)
    $877 平均入札額
    16 入札

    Write software for Raspberry Pi.

    $400 (Avg Bid)
    $400 平均入札額
    10 入札
    P30-Report 終了 left

    ...monthly or on demand. The report should look simular to the report in the picture. Due to limited memory in the P30s the P30-Report has to run (24/7) on a small server or a Raspberry Pi running Windows 10 IoT (open for suggestions). There has to be a simple web-interface for configuring IP-address, looking at reports, etc. The final report has to be in

    $431 (Avg Bid)
    $431 平均入札額
    12 入札

    It's my first project, please keep that in mind. I would like to build a device (Raspberry pi 3+ camera + button) that preforms one specific function: when you push the button, camera takes a photo and sends it by email. Why I need help? I already have all of the hardware components. I need you to write python code that will preform previously stated

    $137 (Avg Bid)
    $137 平均入札額
    27 入札

    Hi developers, I need script for Raspberry, that will be used for cycling several HTML pages in one fullscreen window. On start, it should connect to predefined URL (example http://server/getPages/devA). It will receive JSON like this: [ {"DeviceName":"DevA","PageUrl":"[ログインしてURLを表示]","PageOrder":10,"ShowTime":30}, {"DeviceN...

    $94 (Avg Bid)
    $94 平均入札額
    7 入札

    I need an interface that gives a the ability to control an access point on raspberry pi, I need it to be user friendly and have a nice design. Some features include changing the name of the ssid, control Bluetooth, and shutdown. I need it in the administrative panel of an java, spring backend with Angular 7 front end. Will give a detailed requirements

    $192 (Avg Bid)
    $192 平均入札額
    13 入札

    Looking to design a simple case to print on 3D Width 168mm, Depth 157mm, Height 33mm In the left front corner to have mounted Raspberry 3 ( can mimic existing cad file of a smaller box) In the right back corner to have mount another board (size and position link here) [ログインしてURLを表示]

    $153 (Avg Bid)
    $153 平均入札額
    16 入札

    I am looking for someone who might coach me on how to write...app collect data from a sensor and do some preprocessing and then store the results in database, the app can be run on raspberry pi as well as on cloud VM; the main purpose is to learn how to work with cloud resources and raspberry pi, I just want someone guide me with my learning process?

    $3 / hr (Avg Bid)
    $3 / hr 平均入札額
    3 入札

    Take a Raspberry PI and a Zigbee HUB sw eg Mozilla’s Things Gateway. Make a rest interface to the connected devices. Must support these devices • Radiator thermostat • Door lock • Room thermostat • Temperature sensor

    $1424 (Avg Bid)
    $1424 平均入札額
    9 入札

    I am looking to build either an Arduino or Raspberry Pi weather station to record hourly weather data and upload to [ログインしてURLを表示] or similar weather database: Rainfall Wind speed Wind direction Temperature Humidity Solar radiation. The station needs to have a GPRS/GSM module to allow me to access data and automatically upload to the cloud. I have

    $682 (Avg Bid)
    $682 平均入札額
    36 入札

    Arduino or raspberry pie code writter for a barcode scanner program. Scan a barcode and one led light turns on at a different location. I want to set up 50 led lights scan a barcode and 20 of the 50 lights turn on in different locations.

    $182 (Avg Bid)
    $182 平均入札額
    15 入札

    A program written for a Raspberry Pi 3 (B+), with the following features to begin with: Read MP3 files from USB and display first part of file names on a 16x4 LCD - via GPIO connector, which I will buffer Read MP3 files from USB and play the audio output at a set time - relative to the RTC GUI to allow user to select MP3 file to be played GUI to allow

    $807 (Avg Bid)
    $807 平均入札額
    33 入札

    Hi! I am doing a project where I want a statue lit up with Christmas lights when Node-Red is activated. My application will send a JSON HTTPS Request to IBM Cloud and then I'd like the program to trigger the lights on, preferably with a dimmer effect.

    $53 / hr (Avg Bid)
    $53 / hr 平均入札額
    8 入札

    I kneed to have the Raspberry pi to control relays and have the information of the status of the relays on my computer to know what is open and what is close. I also kneed the code in Delphi so I can modify it as needed

    $216 (Avg Bid)
    $216 平均入札額
    2 入札

    I have an arduino code to read modbus data form another device by using MAX485 and arduino mega now I want to do ...to read modbus data form another device by using MAX485 and arduino mega now I want to do the same thing but by using raspberry pi and MAX485 in python so I want to convert this arduino code to python to be able to run on (raspberry pi).

    $36 (Avg Bid)
    $36 平均入札額
    13 入札

    I want make a display for counting number. I will run the program at ubun...turned on, the number should start from the number saved. I am gonna give you the background image and Logo. If you know about how to run the program that will be made, at raspberry PI 3b+ It would be better. when computer is turned on, the software should start directly.

    $185 (Avg Bid)
    $185 平均入札額
    7 入札

    Project name: Machine learning with openCV to advise robot to move smartly Hardware: (you probably shall have basic hardware) # Raspberry pi. # Simple motors # Pi Camera or similar Software: Python Works: 1. Let me assume that Robot will be placed inside a big working area as shown below. If the ground of area is uniform, and have the same

    $550 (Avg Bid)
    $550 平均入札額
    21 入札

    The job is to translate the simple C++ program to ARm assembly language(Raspberry Pi recommend)

    $28 (Avg Bid)
    $28 平均入札額
    6 入札