絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    2,000 mounted 仕事が見つかりました。次の価格: USD

    <Overview>  Please collect product information on vehicles that have or will have the technology described in the Technology Description section below. <Technology Description>  This technology is designed to improve the cooling performance of a battery cooling system located on the underside of a vehicle.  One of the problems with cooling devices that cool batteries mounted on the underside of vehicles is that heat from the ground heats the cooling pipes of the cooling device and prevents the battery from being cooled.  To solve this problem, the cooling tubes of the cooling system are placed above the bottom of the battery case. Please search for this technology in this contest. <Deadline> The search project needs to be completed within 3 days. <Requirement...

    $50 (Avg Bid)
    保証

    ...few years later to a foreign buyer. Most the technical documentation was destroyed by that buyer. The company is now back in British hands. Fundamentally the system is technically similar to any other hydraulic system but it is the position and the angle at which the master cylinder is mounted that needs to be absolutely spot on. I have photo of the master cylinder and, of course, the car. I can also provide photos of the Bosch discs and pads. The one image I don't have yet is the master cylinder mounted in the vehicle, as part of the clutch housing has to be removed in order to see it sufficiently to get the photo. I will be doing that photo when the car goes in for its service a couple of weeks from now, so this is not an instant 'I can do it today'...

    $91 (Avg Bid)
    $91 平均入札額
    25 入札

    ...on the time of day. To solve this problem, the technology allows the user to set the charging power per unit time that is charged from the power facility to the vehicle, or the discharging power per unit time that is discharged from the vehicle to the power facility. For example, the user can control the power at a charging station to charge the user's vehicle with power charged by solar panels mounted on the roof of the house. The power facilities also include charging stations. Please investigate this technology in this contest. <Deadline> The search project needs to be completed within 3 days. <Requirements for Payment> ・List information in order of your confidence. ・Submit project deliverable within the due date. ・Submit documentary evidence that clearly st...

    $50 (Avg Bid)
    保証

    I am looking for a freelancer who can assist me with the layout of my small A frame house, as well as the MEP (mechanical, electrical, and plumbing) work and insulation. house will be mounted on Screw piles not on Concrete Size of the A frame house: Less than 1000 sq ft Specific requirements for MEP, plumbing, and insulation: I have some ideas, but am open to suggestions from professionals. Level of detail required for the layout: Detailed layout with 3D rendering. Ideal skills and experience: - Experience in architectural design and layout- Canadian or North American homes - Proficiency in MEP design and knowledge of plumbing and insulation requirements - Ability to provide detailed layout plans along with 3D rendering - Strong communication skills to understand my ideas and ...

    $248 (Avg Bid)
    $248 平均入札額
    17 入札
    Catladder 終了 left

    I'm looking for someone to design a cat ladder that will be used outdoors. This cat ladder should be wall-mounted and made of metal. The design must be safe and include all necessary precautions to guarantee the safety of cats using the ladder. It should be able to hold up to the elements, and, if possible, be easy to store away when not in use. Ultimately, I want to provide a secure way for cats to move between areas both indoors and out.

    $100 (Avg Bid)
    $100 平均入札額
    45 入札

    I need to mount a template and a magento plugin or 2.3.7 just upload it and verify that the template and plugin work correctly the site is already mounted

    $149 (Avg Bid)
    $149 平均入札額
    42 入札

    ...programs and circuit boards. - Proficiency in microcontroller programming and embedded systems. - Knowledge of IoT would be a plus. If you have the necessary skills and experience for this project, please submit your proposal. Details 1-I want the smallest Microcontroller possible and most compact design because size/room availability is a premium. 2-The device will have 10 square 5mm LEDs mounted on a separate pc board in a vertical line side by side connected to the board made here by ribbon cable. The effect I want is the top led lights and moves down to the bottom staying lighted. Then the top lights again and moves down to the second from the bottom. This effect continues until the vertical stack is all lighted as if “full” and then all 10 LEDs shut off and t...

    $320 (Avg Bid)
    $320 平均入札額
    30 入札

    I am looking for a skilled designer who can make design modifications to a 3D enclosure I designed. The preferred design style is modern. T...storing a little device to turn on some lights and should be able to be outdoors so rain/water should be consider, so no open holes to avoid ants/spiders to get in. The next pictures show inspiration of the moodboard, modern lines translated into a device, I dont want a simple box: I am attaching 2 files, 1 with the current enclosure and 1 with the electronics, if you decide to use screws, make sure to use M3 sizes

    $45 (Avg Bid)
    保証

    ...The location is in a flood zone in Citrus county FL and subject to central Florida wind loads (min 110mph). It requires near ground level pier footers under the containers for sand/loam soil (~1500lbs/sf). Floor joists will need to span the 14' between the containers. You will need to fill in the blanks for electrical, plumbing, HVAC, etc. HVAC will be handled by a self contained hvac unit mounted high on the endwall of the quoset with a primary cylinder duct in the top of the arch. Bedroom, bath, utility room half of the floor plan should have a floor above that will be for future expansion of additional bedrooms and bath. Living, kitchen area is open to arch. I'd like to have the drawings by 9/20. I've uploaded as much documentation as I have for the pro...

    $837 (Avg Bid)
    $837 平均入札額
    31 入札
    Trophy icon Living room design 終了 left

    Living Room ( One Side ) Design Project Style: Modern - The desired style for the living room design is modern, with clean lines and a minimalist aesthetic. Color Preferences: Neutral Tones - The client prefers neutral tones for the living room design, creating a calm and sophisticated atmosphere. Budget: Less than $2000 - T...$2000, requiring cost-effective solutions and affordable materials. The design is only focused on the area of the window as it is huge and nothing really there. I need to have the 80 inch TV screen to be in the middle. Next to the TV on both sides shelves, drawers, and cabinets where I can put a coffee machine and a microwave. I need mid of the TV to meet the edge of the wall where the TV is mounted on the wall. I need to have only 1/3 of the window to ...

    $100 (Avg Bid)
    $100
    109 エントリー

    Bee Hive Weighing System for Monitoring Honey Production - Purpose: The main objective of this project is to develop a system that can effectively monitor the honey production in bee hives. - Data Logging: The client requires data logging capabilities for the weighing system to accurately track and record the honey production data. - Preferred Method of Data Transm...a time interval preset by me. The data transmitted are: "unique code/kg weight". It may or may not be the weight symbol. Since these systems will be produced in series, I want the package to contain: The component parts of the data sending system Installed software. Instructions for use/installation Address where the component parts can be purchased The entire data sending system will be mounted in a ca...

    $529 (Avg Bid)
    $529 平均入札額
    28 入札
    Bathroom design 終了 left

    I'm looking to redesign my bathroom from scratch and I need some hel...remote opening Velux skylight dimension 134 wide x 98 large (if this is not too big for the space). I'd like to have a modern, updated look with a full renovation. I'm searching for an experienced designer to help makeover my bathroom and create the perfect oasis. I would need a walk in shower with a space to put towels, 90cm wide x 1.20m if possible with sliding door, a single sink and wall mounted toilet if possible. The ideal candidate for this project should be knowledgeable in the modern style and understand the challenges that may arise from such a small space. I'm open to creative solutions and am excited to see what design you come up with! I am enclosing the actual one. Will nee...

    $41 (Avg Bid)
    $41 平均入札額
    66 入札
    VRF for Office 終了 left

    I am looking for a HVAC Plan for a VRF system for a office building. Total area is 1000 sq. meter. (approx) Unfortunately we are fixed for buying components. That means, there is the Indoor and outdoor units are already selected. 30 indoor units (kassette and wall mounted mixed) and 3 outdoor units (Y-Serie 33,5 kW PUMY-P300YBM) What exactly i am looking for is the type of Multiport Distributor and Refrigerant pipe length and diameter.

    $16 / hr (Avg Bid)
    $16 / hr 平均入札額
    20 入札

    I am looking for a talented designer to create mock-ups of MDF mounted posters. The dimensions of the poster should be A3 (297mm x 420mm). I have attached some reference images. I need the mock up to show from the side angle a mdf board mounted poster on a wall. Design Elements: - I would like the freelancer to choose the specific design elements and images to include in the mock-up. Color Scheme: - The expected color scheme of the poster should be vibrant and multicolored. Skills and Experience: - Strong graphic design skills - Experience in creating eye-catching and visually appealing posters - Ability to work with vibrant and multicolored color schemes - Creativity and an eye for detail Deliverables: - 2 PSD files of the mock-ups [ 1. poster on wall and 2. th...

    $18 (Avg Bid)
    $18 平均入札額
    12 入札

    Project Title: PSD Mock Ups of Foam Board Mounted Posters Description: I am looking for a skilled designer who can create PSD mock ups of foam board mounted posters. The posters will be A3 and A4 in size. I have attached some reference images. I need the mock up to show from the side angle a foam board mounted poster on a wall. Skills and Experience: - Proficiency in Adobe Photoshop or similar design software - Experience in creating realistic mock ups - Strong attention to detail in accurately representing the foam board mounting - Ability to work with existing poster designs and create mock ups when the design is mounted Please provide examples of your previous work in creating poster mock ups.

    $14 (Avg Bid)
    $14 平均入札額
    16 入札

    Product Overview --------------------------------- The Corridor Light Button is an nRF52840-based battery-operated LED light source with a large button to be mounted in the corridor outside of a patient's room in a care facility (hospital, nursing home, elderly home). The purpose of this device is to externally indicate statuses inside the patient's room based on a number of alerts that are detected by an in-room monitoring system ("Gateway"). The device is paired via Bluetooth Low Energy (BLE) to the Gateway and acts as a GATT server (custom profile) with the Gateway acting as a GATT client. At a minimum the GATT server receives commands from the GATT client to control its RGBY LEDs, and notifies the GATT client of the status of the button and the level of the d...

    $34 / hr (Avg Bid)
    $34 / hr 平均入札額
    24 入札

    Hi, I'm looking for someone to make me an index and detail page templates that I could use with my own project. Templates should be created using Bootstrap 5 + font awesome (if needed) and should be as clean as possible it will be mounted on python flask. I only need 2 pages expecting HTML, CSS and JS. No react no fancy single page app frameworks. Thank you looking forward

    $139 (Avg Bid)
    $139 平均入札額
    42 入札

    ... file for 3D printing. The lamp should have a minimalist design and I will provide the specific dimensions for the project. The Lamps dimensions should be customizable. The goal is to have a lamp similar to the images attached. however the design should be able to mount a led stripe channel (aluminium with diffusor) inside. No need for the design to have a lid or something, since it will be mounted inside a wall. For the final design it would be great if you could send screenshots along the way so 1 or 2 changes can be implemented while you create the design. Skills and experience needed: - Proficiency in 3D modeling and design software - Experience in creating 3D printable files - Ability to work with provided dimensions and specifications This project requires attention...

    $120 (Avg Bid)
    $120 平均入札額
    54 入札

    ...Method of Installation: Wall Mounted Ideal Skills and Experience: - Experience with ZKTeco Attendance devices - Knowledge of employee attendance tracking systems - Familiarity with access control systems - Proficiency in wall-mounted device installation Project Description: We are looking for a freelancer who can assist us in setting up a ZKTeco Attendance device for both employee attendance tracking and access control. The device should be installed on the wall. Standard features are sufficient for our needs, so no custom features or integrations are required. The ideal candidate should have experience with ZKTeco Attendance devices, knowledge of employee attendance tracking systems, and familiarity with access control systems. Additionally, proficiency in wall-mount...

    $140 (Avg Bid)
    $140 平均入札額
    2 入札

    Our ubuntu version is 20.04. We need to find a virtual machine base for some reason when it restarted it did not stop showing in the default you have to search or recover a database of a virtual machine mounted in Virtual Machine Manager that is, the .qcow2 file required to make the virtual machine work

    $8 - $15 / hr
    シール
    $8 - $15 / hr
    3 入札

    ...of further and curtain close coming fully to the end screen loop 5. Split screen: Use the room but give at another angle so you can use a wall for example for a larger screen on the left dedicated to the game footage. This allows viewers to primarily focus on the game since it's the main section can be designed to look like it's a projected hologram or a large digital display mounted on the wall of the room. The edges of the screen could have a slightly glowing effect to emphasize the digital nature of the screen, and it would fit well with the cyberpunk aesthetic. The smaller section on the right could show the streamer's desktop. This allows for interactions such as reading chat, showing strategies on a map, or browsing the web. . Alerts: Alerts and not...

    $545 (Avg Bid)
    $545 平均入札額
    14 入札

    I need a 3d animation rendering of angles from the sides and bottom of a pontoon and tritoon. This rendering will show the interaction between our VARA Foil and the boat it is mounted to that can be seen at pontoonhydrofoil.com. The animated rendering must show how ALL parts are adjustable ( move) on the x, y, and z axis. X= front to back 24", y= up and down 5", and z= AoA ( Angle of attack ) change of foil from +7 to -3 degrees. The animation must show a motor, which will also show how our VARAPlate attaches to the lower ventilation plate. More info can be found on youtube search of pontoon hydrofoil if needed. Please be sure you understand the scope of our needs before bidding. This must be quality leading edge renderings that will be used for a 20-30 sec pauseable loop ...

    $464 (Avg Bid)
    $464 平均入札額
    42 入札

    I need an improved yet simple thermostat that is used in homes. It must suffice the 2 use cases. It is crucial that it is made using Qt and C++. You will design an improved GUI for the boiler control panel. Such a display will be shown on a wall-mounted panel (a smart thermostat) inside a residential house. Perform an analysis of the problem space using the PACT (People, Activity, Context, & Technology) framework to scope potential design issues. You will design, implement, and evaluate a solution to support two use-cases Must be done using the QT creator project, and using C++. Please check the file attached for more details

    $19 (Avg Bid)
    $19 平均入札額
    7 入札
    Landscape design 終了 left

    I am looking for a skilled landscape designer to help me create a beautiful outdoor space for my small area of less than 500 sq ft. The main focus should be on incorporating an existing tree and bush to create a lush and green environment. Additionally, I would like the design to include a small path easy to a mounted water hose. Experience in designing small spaces and knowledge of landscaping design techniques would be ideal for this project. Project is located in Torrance, CA

    $371 (Avg Bid)
    $371 平均入札額
    61 入札

    You will design an improved GUI for the boiler control panel. Such a display will be shown on a wall-mounted panel (a smart thermostat) inside a residential house. Perform an analysis of the problem space using the PACT (People, Activity, Context, & Technology) framework to scope potential design issues. You will design, implement, and evaluate a solution to support two use-cases Must be done using the QT creator project, and using C++. Please check the file attached for more details

    $143 (Avg Bid)
    $143 平均入札額
    6 入札

    I am looking for a skilled PCB designer to help me with the development of a synthetic aperture radar (SAR) project. With magnetometer The project requirements are as follows: - PCB Size...Ideal skills and experience for this job include: - Proficiency in PCB design, particularly for small-sized PCBs. - Experience in designing and integrating array antennas into PCBs. - Knowledge of various PCB trace routing techniques and abilities to adapt to different requirements. If you have the necessary skills and experience in SAR PCB design, please submit your proposal. This unit will be mounted to a fixed wing drone and needs to scan for aluminium in dense bushland at a height of around 600m I require as an end result a schematic and assembly instructions of the unit with component pa...

    $309 (Avg Bid)
    $309 平均入札額
    24 入札

    ...require the following: · Lower thirds – for presenter names and Q&A details · Holding slides to display as the waiting room opens but before we go live. · The ability to show slides as requested. (We should be able to adjust the size of the slide feed in comparison to the live feed of the speaker.) We must have 3 televisions · 1 mounted behind us, the speaker, to show slides · 1 mounted at the back of the room, so we can see the faces of the online participants. · 1 small at the font, facing 2 speakers, so they can see themselves. Is this something you could provide, or could you refer to another person or company ? Kindly let us know your answer ASAP Than...

    $19262 (Avg Bid)
    地方
    $19262 平均入札額
    1 入札
    Wall Mural 終了 left

    I am looking for a professional artist preferably located near Charleston, SC to create an abstract wall mural that will incorporate wall-mounted acoustic panels and provide a cohesive atmosphere for a large calming space where we will share 2 home offices plus a gym. The mural will be located indoors, and the size is estimated to be between 200 - 300 square feet. Quality and attention to detail are important, but we don't want it to feel out of the box like a computer could have made it. We would love to see your human touch and bring unique ideas to the project. I hope to have some collaboration between myself and the artist to ensure the colors and style align with our vision, but I want this to be your artistic expression of the request. If you are an experienced artist ...

    $914 (Avg Bid)
    $914 平均入札額
    15 入札

    Harddrive has been unmounted in case of unknown situation and re mounted again and needs to become fixed in the storage. If possible update to latest nextcloud version. Nextcloud verion Anydesk & Sudo access will be shared.

    $35 / hr (Avg Bid)
    $35 / hr 平均入札額
    5 入札

    I am looking for an experienced electrical layout designer with expertise in commercial projects. The ideal candidate should have knowledge and skills in flush-mounted installations and lighting design. The project involves creating an electrical switches, plugs and power points for a hotel room and corridor and lobby, with a focus on points positions to be handed over to the builder contractor. Points Requirement: ROOM 1. Keycard whick controls all power inside the room. Inside the door at a height of 4.5' 2. TV Plug 1, tata Sky Plug 1, 3. Study table- Plug 1, Charging point Plug 1, USB point 1 4. Fridge Point -1, 5. Bedside Side Table Charging Points -2 6. Side Table Light Points 2 7. Ceiling Point a-1 Above the TV 8. Ceiling point b – 1 Entrance door side. In the m...

    $64 (Avg Bid)
    $64 平均入札額
    6 入札
    eti procedure 終了 left

    I'm writing a report, and I need a sketch. There is a mannequin on a Table. And three cameras (left, right, and in front). The person operates on the mannequin. And I would like to show the camera positioning during the task. The person also wears a head-mounted camera. All these cameras and views need to be present in the sketch.

    $121 (Avg Bid)
    $121 平均入札額
    13 入札

    To commemorate the 100th anniversary of Luse, our company is looking for a photographer to capture digital images of some original historic framed photos at our Aurora, IL office. There are around dozen pictures varying in size between 4"x6" to 45"x50". We would like these photos taken in the highest resolution possible to then be blown up and printed on thick poster board to be mounted on easels for our 100th Anniversary Party on Sept 15, 2023. This work can be completed at your convenience, but with enough time to see proofs of the work and have the posters printed in plenty of time before the event. Thank you!

    $483 (Avg Bid)
    地方
    $483 平均入札額
    3 入札

    I am looking for a reliable freelancer to help hang a modern chandelier in a room with a ceiling of 10-15 feet. The chandelier is a modern style and must be properly mounted in order to ensure the safety of the piece. I need a technician who has experience in the installation of chandeliers, and who can guarantee that the piece is safely mounted and secured. As this is a delicate type of work, I will be requesting for references to ensure a job well done. Please contact me if you have the necessary skills and experience to complete the task. Thank you.

    $250 (Avg Bid)
    地方
    $250 平均入札額
    1 入札

    ...detailed design for a 3D product prototype, and is intended for either rapid prototyping or aluminum mold making purposes. Ideally, I need someone with specific experience in 3D printing and CAD design who can understand the complexities of the project and deliver quality results. I will send specs/data to the chosen candidate. These specs describe the mounting holes, dimensions of items to be mounted inside the item being designed for 3D printing/Rapid prototyping. The successful candidate should include a portfolio of past work and relevant experience related to the project in their application in order to demonstrate their capabilities. Projects should be submitted with detailed proposals and any necessary documentation, including but not limited to diagrams and sketches. ...

    $414 (Avg Bid)
    NDA
    $414 平均入札額
    60 入札

    We are to fabricate carbon steel roof mounted frames for new AC units from channel steel and angle iron supports.

    $1865 (Avg Bid)
    $1865 平均入札額
    41 入札
    AraniProject 終了 left

    Hi, we are looking to rebrand our startup company. We are a robotic company that manufactures autonomous utility robots. Attached is the logo we designed ourselves but still expecting something better. The new brand name is ARANI. The new logo will be mounted on the front of our newly manufactured vehicles like HONDA or TOYOTA's logos. Please let me know if we are interested to collaborate and we will provide more in-depth information and guidelines.

    $204 (Avg Bid)
    $204 平均入札額
    60 入札

    Pcb size is 90 x 70mm And outside solar is 80x80 x 2mm And a antenna and cable will come out from enclosure. Enclosure must be weatherproof ( from rain and dust). Must be pipe or wall mounted. All 3D files required necessary for production.

    $79 (Avg Bid)
    $79 平均入札額
    15 入札

    ...adjust the length of time the pump runs at a factory level – this run time will be set up before the unit is delivered to the end user. We need to have the operator with the ability to adjust the frequency the pump runs using a multi position dial. The output needs to be intermittent with the ability to adjust the duration of supply and the duration of non-supply. the circuit board needs to be mounted in an enclosure with a 5 to 7 position switch an operator can adjust the duration of the non-supply periods, needs a on off switch for the operator and a led light to indicate to the operator when the supply is active and another to indicate if the unit has power. Attached is a unit that is like what we wish to make. The example notes “weed sensor” the model we ma...

    $350 (Avg Bid)
    $350 平均入札額
    34 入札

    I am looking to work with a freelancer to design and consult on a lightweight drone mounted synthetic aperture radar system. The radar system should have a short-range capability, up to 1 km. The intention of this system is scanning dense bushland from a uav at up to 1km height. To find a small aircraft wreck made of aluminum the freelancer should be knowledgeable in the integration of various components required for the successful implementation of the project. I have a list of generic parts that will be required as well as suppliers which we can discuss further at a later date which ones might be sufficient The end result i require is a drawn schematic and assembly description. Which the exact part numbers and suppliers

    $613 (Avg Bid)
    $613 平均入札額
    19 入札

    ...Conduct a comprehensive structural stability analysis for a small sheet metal roofing structure - Sheet metal roofing is 15 yrs old so would be needing a physical survey - Identify any potential issues or concerns related to the structure's stability - Provide recommendations for improving the structural integrity and durability of the roofing system - There is going to solar Panels that will be mounted on top the sheet metal roof so we would need to make sure it can take the load as well. Ideal Skills and Experience: - Proficient in structural engineering and analysis - Familiarity with sheet metal and RCC roofing systems and their unique structural requirements - Experience in conducting thorough stability assessments for small structures - Strong problem-solving skills t...

    $260 (Avg Bid)
    緊急 NDA
    $260 平均入札額
    6 入札

    "I want to send information from four light sensors mounted on Arduino to Android via BLE (HM-10). I am currently stuck with coding and would like to know how to code in Android. I want to process the received data in Android and visualize it in the form of a graph. Could you please teach me how to code in Android?"

    $149 (Avg Bid)
    $149 平均入札額
    28 入札
    Update a AI Game 終了 left

    Project Title: Update a AI Game Description of Game: High Concept Two (or more) teams of AI agents compete to control cannons mounted on towers on a map for the longest amount of time within a timed round. Each team will be represented by a different colour, and should have a base around the edges of a level where they will respawn if their health drops to zero or less. Towards the centre of a level there should be several towers that can fire cannon ball like projectiles at agents at some rate. If a cannon ball hits an agent the cannon ball is destroyed and the agent suffers damage reducing their health. If a cannon ball does not hit an agent it will bounce around the level and eventually come to rest. Initially towers are neutral, firing cannon balls at any agent within range. O...

    $481 (Avg Bid)
    $481 平均入札額
    26 入札

    I require a circuit schematic design and PCB layout for a solid state relay. The design needs to adhere to the following requirements: Voltage range of 24V-->220VAC Current: 40A Interface: The design will interface with a microcontroller pin. Load: The design is for highly inductive loads Switching...Interface: The design will interface with a microcontroller pin. Load: The design is for highly inductive loads Switching type: Random (Not zero-crossing) Protection: The device needs protection against transient voltage spikes with a suitable snubber and protection circuit PCB size: maximum 80x60mm (Preferably smaller) The design should allow for the TRIAC IC (For example) T4050-6PF to be directly mounted on a heatsink on the bottom of the PCB. (The PCB should have a cut-out to al...

    $505 (Avg Bid)
    $505 平均入札額
    42 入札

    Hello, I am looking for a talented freelancer to design an EV charger for me. The charger needs to be a wall-mounted type with power output requirements of more than 50kW. In addition, I need the product to also feature energy usage monitoring. I am hoping to find someone who is experienced and skilled in product design and can help to bring this project from concept to reality.

    $111 (Avg Bid)
    $111 平均入札額
    8 入札

    I am looking for a freelancer who can help me with manually rebooting my unresponsive AWS server. I have full access to my AWS server console. The server is running on Linux operating system. Skills and experience required: - Strong knowledge of AWS and server management - Experience with SSH and command line interface - Familiarity with Linux operating system I...have full access to my AWS server console. The server is running on Linux operating system. Skills and experience required: - Strong knowledge of AWS and server management - Experience with SSH and command line interface - Familiarity with Linux operating system Issue: Server is not responding and gives error /home/ftp/media: open for read: no such file or directory. I think the issue is the mounted EFS drive is not ...

    $113 (Avg Bid)
    $113 平均入札額
    20 入札

    Telecoms engineer needed for relocation of cabling on residential property We are planning to get some building work done in August which includes demolishing our front porch. Currently, our telephone and broad band cabling and junction box, which serves ours and our neighbour's property, is mounted to the porch - so it needs to be moved. Our neighbours are happy to have it mounted onto their existing (already extended) porch instead - so therefore the whole thing only needs moving a couple of feet to the right. Please see the picture attached (the white wall being the front of our porch and the brick wall being the side of our neighbours' porch.

    $423 (Avg Bid)
    $423 平均入札額
    6 入札

    Hi! I would like to add a logo to an image, and make it look like it has been wall-mounted. This task will suit someone who is very good at realistic logo mockups. - The logo should be white, and sized according to the example - The end result should look photo-realistic, and look like a natural part of the image. - Shadowing should be correct, and should take into account the lighting in the image. - The resolution and format of the original image (6K png) should be maintained. Attached is a rough example of what it should look like, together with the logo and the background image. Feel free to submit as many variations as you'd like to. The winner will be the person who submits the most attractive, realistic entry. Looking forward to your entries!

    $9 (Avg Bid)
    保証

    ...ComputerAV Turtle drawing logo revision request I’d like to have it promote my company a bit better Please see the services I offer I’m thinking - adding some speakers maybe to the top banner - mounted there perhaps or ceiling mounted Or floor standing speakers maybe tower speakers On the one hand I don’t want to totally detract from the turtle but on the other hand I think I want it to be an almost silly amount of audio video stuff added So maybe huge speakers that are maybe almost comically huge —- And then also I’d like to see a TV - maybe he’s got a tv mounted in front of him somehow on a swing arm bracket Or maybe the banner at the top is a tv Or maybe the diamond element behind him - is instead - a tv And I t...

    $20 (Avg Bid)

    トップmountedのコミュニティ記事