絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    203 microstation 仕事が見つかりました。次の価格: USD

    The project is to prepare engineering drawing to install a traffic signal in Maryland, all drawing made according to SHA cad standard- we are looking, Draft Person

    $21 / hr (Avg Bid)
    $21 / hr 平均入札額
    13 入札

    Hi and thank you for reviwing this project. We have compleet all the field work for a 7,000 hectare drone photogrammetric project. We have collected the following: - 55,000 photos with an Phantom 4 Pro at ~150m (410GB data) - 4,200 photos with an Ebee Plus at ~200m (34GB data) - 65 ground control points If you are not based in Peru: We need to process this data on our high powered workstatio...

    $1212 (Avg Bid)
    $1212 平均入札額
    2 入札
    Designer needed 終了 left

    As a qualified candidate, you will have the above experience and meet the requirements below: Must be thoroughly proficient utilizing MicroStation and AutoCAD 6+ years of experience drafting electrical, civil and structural drawings Must have solid experience in, and be able to produce scaled/scalable drawings Familiarity with Raster Design and Descartes V8i Associates Degree in Computer Aided De...

    $550 (Avg Bid)
    $550 平均入札額
    16 入札

    A surveyor based in Australia with MicroStation to undertake some tasks using a model provided by the hirer. Please note the freelancer MUST have their own copy of MicroStation software and be proficient in its use. We will provide the raw files (model) for import into MicroStation. The surveyor will be required to go over the model and highlight certain features.

    $1333 (Avg Bid)
    $1333 平均入札額
    5 入札

    I have a project on Lidar Data Classification for Vegetation Study. I am looking for experienced who have worked on Lidar using Microstation. If anyone is looking for the job please ping me and also let me know the rates of your job.

    $4 / hr (Avg Bid)
    $4 / hr 平均入札額
    5 入札

    We are in need of someone to program in vb.net or C (resulting in an MDL). The project will require knowledge of MicroStation commands. The end product would be an installation with security measures. After successful completion, we have more modules to be written. We are anticipating a long term relationship.

    $1261 (Avg Bid)
    $1261 平均入札額
    16 入札

    I am interested in contract freelancers who can build video tutorials, step by step with narrative audio. Profesional audio not needed, but clear. Any context english. Spain or Latinamerica Spanish. The topics: -AutoDesk Revit -AutoDesk Civil3D -Bentley Microstation -Bentley Aecosim -Bentley Synchro -Bentley ContextCapture Other similar software for BIM is welcome Please send project proposa...

    $156 (Avg Bid)
    $156 平均入札額
    8 入札

    I want to create microstation format drawing from PDF engineering drawings. I have more drawings to be convert. more detail. [Removed by Freelancer.com Admin]

    $454 (Avg Bid)
    $454 平均入札額
    23 入札

    Need an AutoCAD drafter for multiple projects. MUST have AutoCAD and be fluent in the program. Also need to know how to read hand written notes in English. Other credentials that I would like to see is the use of AutoCAD Architecture software and MicroStation software. Please bid your hourly rate. Also if you have architectural experience in AutoCAD Architecture please send me some of your sample ...

    $24 (Avg Bid)
    $24 平均入札額
    29 入札

    I need someone today to digitise a couple of hand drawn layouts for use on microstation. It's about 1-2 hours work I'd guess. Can you do that today if i send you the pdf? The scope is 1No A3 1:50 pdf layouts of some church toilets digitised into dxf or dgn format 2No 1:50 cross sections (on 1 A3 sheet) digitised into dxf or dgn

    $17 (Avg Bid)
    $17 平均入札額
    17 入札

    Survey existing building including floor plan, elevation, section, electrical, mechanical, plumbing, fire protection, heating ventilation and air condition, roof drainage, input on auto cad or microstation, provide zoning ordinance study of all front yard, side yard, rear yard setback, floor area ration, building high, building lot area, floor area calculation and studies.

    $18 / hr (Avg Bid)
    $18 / hr 平均入札額
    10 入札

    Need microstation v8i expert Details will be shared while screening

    $21 (Avg Bid)
    $21 平均入札額
    7 入札

    I have some drawings that I need marked up. The files are DGN (Microstation). Previous experience working with redline drawings preferred.

    $97 (Avg Bid)
    $97 平均入札額
    22 入札

    Me interesa que diseñes una vivienda, usando AutoCAD y grabando como video tutorial la narración de lo que vas haciendo. Pagaré por hora, según como acordemos. Básicamente interesa: -Configuración de espacio de trabajo, ejes constructivos, planta constructiva, inserción de bloques, acotamiento, impresión, trazado de vista y un corte transver...

    $12 / hr (Avg Bid)
    $12 / hr 平均入札額
    3 入札

    Seeking a savvy Industrial designer with proven expertise in AUTOCAD/RHINO/SolidWorks for manufacturing worthy industrial design and prototyping of micro components for a medical device. Experience designing medical grade devices is a definite plus. Scope: This project has two parts: PART A: Single Use Cartridge Design Modifications: Modify and develop the Single Use cartridge design in AUTOC...

    $2485 (Avg Bid)
    $2485 平均入札額
    49 入札

    Our company has been contracted to undertake Primary and Secondary systems design for changes to a 33kV electrical substation. We require the services of a very experienced Microstation design/drafter to prepare modifications to existing 33kV primary plant, structures, and protection/comms/scada secondary systems drawings.

    $24 / hr (Avg Bid)
    $24 / hr 平均入札額
    16 入札
    Lidar processing 終了 left

    Hi All, I'm looking for freelancers to work on my projects for lidar data processing. Candidates must have good experience into classification and DTM/DSM extraction using Microstation or terrasolid applications.

    $6 / hr (Avg Bid)
    $6 / hr 平均入札額
    2 入札

    I need to have this architectural plan be created in a 3-D model in Microstation or Autocad.

    $149 (Avg Bid)
    $149 平均入札額
    35 入札

    Job Description CAD Operator (CADD, Civil 3D); freelance, part time, flexible, remote are O.K. The candidate must be residing within 100 miles of New York City. Qualifications • Minimum of 2 year experience within drafting, or graphics using CAD • Must have a working knowledge of the various CADD systems (AutoCAD, Civil 3D and others as required) • Additional programs : Microstation...

    $38 / hr (Avg Bid)
    地方
    $38 / hr 平均入札額
    1 入札

    To reproduce AutoCAD drawings into MicroStation. Would be beneficial if in the South London Area.

    $20 / hr (Avg Bid)
    地方
    $20 / hr 平均入札額
    2 入札

    I want you to work on MicroStation Program..

    $23 (Avg Bid)
    $23 平均入札額
    4 入札

    Need to find a person, who can develop or design a tool that can capture the data from Microstation files to xls formats.

    $125 (Avg Bid)
    $125 平均入札額
    6 入札

    I have a few microstation (dgn) files that need to be edited. I will need the completed files in PDF and in DGN. I will upload the file to you later in a pm

    $122 (Avg Bid)
    $122 平均入札額
    6 入札

    hi iam present working in gis platform i had experience in what i did projects on bst cad, autocad,spatial net, microstation and G technology.

    $185 (Avg Bid)
    $185 平均入札額
    14 入札

    Produce manufacturing drawings of Pump Heat exchanger assemblies, pump assemblies, storage tank instrumentation assemblies and actuated valve assemblies.

    $137 (Avg Bid)
    $137 平均入札額
    16 入札

    I need a simple but accurate model for exterior render purposes only made from Microstation 2D CAD drawings.

    $95 (Avg Bid)
    $95 平均入札額
    42 入札

    I'm looking for a programmer to provide the following: create a simple program that can run through a Google Earth KML file and delete any duplicate placemarks. There is no way to do this in GE other than manual removal. With a file with thousands of duplicates from two similar data sets, this takes a lot of time. I used to work with a mapping program called Microstation 20 years ago, an...

    $23 / hr (Avg Bid)
    $23 / hr 平均入札額
    3 入札

    Hi Colette J., I noticed your profile and would like to offer you an opportunity to do some CAD work. It would be in Microstation. Should be easy to learn -we have the drawings setup -just need help with CAD. Basically full time work for a month or two. Please let me know if this is something you would be interested in. Regards, bryce.

    $13 / hr (Avg Bid)
    $13 / hr 平均入札額
    1 入札

    Hi Siroos J., I noticed your profile and would like to offer you an opportunity to do some CAD work. It would be in Microstation. Should be easy to learn -we have the drawings setup -just need help with CAD. Basically full time work for a month or two. Please let me know if this is something you would be interested in. Regards, bryce.

    $35 / hr (Avg Bid)
    $35 / hr 平均入札額
    1 入札

    I need a plug-in for microstation v8i,Used to car paint [ログインしてURLを表示] you have relevant experience, please contact me. (There is a similar product called "TRICAD VENTURIS")

    $16666 (Avg Bid)
    $16666 平均入札額
    3 入札

    we have project where it does need inroads microstation V8i ...remember we need this only ....no autocad nothing ...just inroads Bently Survey mapping experts

    $373 (Avg Bid)
    $373 平均入札額
    4 入札

    I want a drawing in microstation software. please note again that I want to have a design in MicroStation. If you know the work its simple in designing like 10 -15 minutes work

    $23 (Avg Bid)
    $23 平均入札額
    8 入札

    do you have some time to do some more work? PDF to DGN microstation. need by saturday

    $100 (Avg Bid)
    $100 平均入札額
    1 入札

    Product is Bentley MicroStation V8i and I am looking for a MDL, VBA or Macro to label a user selected line, prompts the user for the label text (last used as default), places a leader (straight or curved [both options please]) and where the text is aligned with the selected line segment. Very similar to the current Place Text Above or Below element except adds a leader functionality. For use wit...

    $656 (Avg Bid)
    $656 平均入札額
    4 入札

    I am looking for Freelance who can work on Microstation + .Net on Contract basis for 3-6 Months. I am not going to outsource this work. If you are interested to work in my office please contact. Office Location is Hyderabad, Banglore or London.

    $608 (Avg Bid)
    $608 平均入札額
    10 入札

    We require a CAD Designer to: • Extract 2D information from 3D Point Cloud files in a Bentley MicroStation 2D and 3D environment • Approx. 18 No. sites

    $9102 (Avg Bid)
    $9102 平均入札額
    35 入札

    I need a 3D model of something. I am interested part time auto cad designing. I have experience in 2d, 3d model design, MicroStation, Microsoft xl, node bad. So I want this experience based job.

    $630 (Avg Bid)
    $630 平均入札額
    5 入札
    Design project 終了 left

    I need a 3D model of something. I am kalaiselvi. I have experience in auto cad 2d drafting and 3d Bentley model, MicroStation, Microsoft excel, note bad, pdms modeling. So I want this experience based part time job.

    $1080 (Avg Bid)
    $1080 平均入札額
    1 入札
    unigraphics nx 終了 left

    I am looking for a freelancer to help me with my project. The skills required are CATIA, Finite Element Analysis, Microstation and Nanotechnology. I am happy to pay a fixed priced and my budget is $250 - $750 USD. I have not provided a detailed description and have not uploaded any files.

    $443 (Avg Bid)
    $443 平均入札額
    6 入札

    I need a project to be done in the programm Microstation. I need someone to design an object related to an amusement park. It can be a larger object like a ferris wheel or a smaller object like a snack stand. If you choose to design a smaller one it shoud be more detailed, but if you want to design a larger one it does not have to be this detailed. It should also have differant textures and colo...

    $258 (Avg Bid)
    $258 平均入札額
    1 入札

    We have a few medium sized residential projects at delivery stage and require CAD technicians to support a small team of architects.

    $29 / hr (Avg Bid)
    地方 特集 緊急
    $29 / hr 平均入札額
    3 入札
    microstation 終了 left

    I need somebody good at Microstation. Make sure you are prefect in microstation. I want top graduate

    $82 (Avg Bid)
    $82 平均入札額
    7 入札
    microsation 終了 left

    I need somebody good at Microstation. Make sure you are prefect in microstation. I want top graduate

    $89 (Avg Bid)
    $89 平均入札額
    7 入札

    i have experiance in piping and instrumentation diagramas in autocad, microstation and smarplant p&id softwares

    $95 (Avg Bid)
    $95 平均入札額
    7 入札

    I am looking for a freelancer to help me with my project. The skills required are Autodesk Revit, CATIA, Google SketchUp and Microstation. I am happy to pay a fixed priced and my budget is $250 - $750 USD. I have not provided a detailed description and have not uploaded any files.

    $400 (Avg Bid)
    $400 平均入札額
    30 入札
    bim 終了 left

    I am looking for a freelancer to help me with my project. The skills required are Autodesk Revit, CATIA, Google SketchUp and Microstation. I am happy to pay a fixed priced and my budget is $250 - $750 USD. I have not provided a detailed description and have not uploaded any files.

    $457 (Avg Bid)
    $457 平均入札額
    28 入札

    Hello i am trying to get the design of the column and the fondation design for a small replacement bridge Can pay $50 for it I need this within 24 hrs i am trying to get the design of the column and the fondation design for a small replacement bridge. i have attached all the necessary information . Requirement Details -: *It should be written in the form of the project proposal report. Th...

    $110 (Avg Bid)
    $110 平均入札額
    10 入札

    Hello i am trying to get the design of the column and the fondation design for a small replacement bridge Can pay $75 for it I need this within 24 hrs i am trying to get the design of the column and the fondation design for a small replacement bridge. i have attached all the necessary information . Requirement Details -: *It should be written in the form of the project proposal report. Th...

    $88 (Avg Bid)
    $88 平均入札額
    6 入札

    Hello i am trying to get the design of the column and the fondation design for a small replacement bridge Can pay $50 for it I need this within 24 hrs i am trying to get the design of the column and the fondation design for a small replacement bridge. i have attached all the necessary information . Requirement Details -: *It should be written in the form of the project proposal report. Th...

    $142 (Avg Bid)
    $142 平均入札額
    5 入札

    Hello i am trying to get the design of the column and the fondation design for a small replacement bridge Can pay $50 for it I need this within 24 hrs Requirement Details -: *It should be written in the form of the project proposal report. There should be an expanation for everything. 1) The column calculations and design, determine Rebar size for the column included with autocad or microst...

    $140 (Avg Bid)
    $140 平均入札額
    4 入札