絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    1,565 build project adc 仕事が見つかりました。次の価格: USD

    Develop simple application to send data over Lora module controlled by ESP32 module based on ADC and GPIO values.

    $156 (Avg Bid)
    $156 平均入札額
    10 入札

    Detailed Deliverables : [Deliverable 1] Separate Test Benches creation for S&H, buffer, comparator, DAC characterization and optimization & improvement suggestion [INR 2000] [Deliverable 2] Test Bench for complete ADC & Characterization [INR 6000] a. Test Bench for SNR/SNDR, ENOB analysis b. Test Bench for INL/DNL/offset analysis c. Toplevel improvement suggestion [Deliverable 3] Detailed discussions [INR 2000]

    $121 (Avg Bid)
    $121 平均入札額
    1 入札

    ...am in need of a professional capable of setting up an Integrated Development Environment (IDE) utilising a Nordic nRF52840. This IDE should utilize a simple ADC data to BLE example project (with minor modifications or any other code with similar functionality ). Segger embedded Studio is the prefered one, but VS Code or any cloud IDE are okay too. While you can use either C, C++, or Python, the emphasis is on creating a functional programming environment. Your responsibilities will include: * Configuring the IDE and project code for the functional nRF52840 based device (the device, after programming, must demonstrate data transmission to BLE central). I am looking for someone who

    $491 (Avg Bid)
    $491 平均入札額
    19 入札

    As an ambitious project lead, I am seeking an expert firmware developer with deep knowledge and experience in STM32WL55JC series microcontrollers. I am focusing on a cutting-edge IoT application and need someone who can program efficient, power-saving wireless communication features. Specifically, the project requires: - Programming STM32WL55JC for an IoT system - Proficiency in developing low power consumption firmware - Wireless communication integration in firmware - Need to use timers, ADC and UART/RS485 communication This role is an optimal fit for someone with direct experience in IoT applications, appreciating the art of power management and seamless connectivity in firmware design. An understanding of the STM32WL55JC series microcontroller is essential for ...

    $390 (Avg Bid)
    $390 平均入札額
    41 入札

    I'm seeking an exp...Simulink HDL coder to assist with a project focused on generating and optimizing HDL code from Simulink models. The models primarily consist of mixed-signal systems such as memory array and ADC, so previous experience working with these is crucial. The objective is to target this code to Field Programmable Gate Arrays. Ideal Skills and Experience: • Extensive experience with Simulink HDL coder • Understands how to optimize HDL code • Previous work with mixed-signal systems • Experience with FPGA and ASIC implementation This is an excellent opportunity for an experienced coder who is familiar with Simulink Model and has a solid understanding of HDL code and mixed-signal systems. Your expertise in these areas will greatly contrib...

    $18 - $151
    $18 - $151
    0 入札

    I'm interested in working with someone who can accurately measure and an...someone who can accurately measure and analyze the non-idealities of a SAR and Flash Analog to Digital Converter (ADC). It should be done Cadence virtuoso software. Your task will include: * Measuring and analyzing the offset error * Measuring and analyzing the gain error * Assessing the non-linearity, including integral non-linearity (INL) and differential non-linearity (DNL) Ideal Skillset: * Strong experience in ADC measurement and analysis * Hands-on experience with SAR and Flash ADCs * Knowledgeable of Cadance virtuoso software. Please include any relevant past work on ADC analysis in your application. This will be helpful in evaluating your expertise related to this project....

    $144 (Avg Bid)
    $144 平均入札額
    1 入札

    I'm seeking professional who has hands-on experience with Arduino Nano BLE 33. If you have a solid understanding and knowledge of Manchester coding and MIL STD 1553 Bus, transmitter and receiver communication, as well as DMA and ADC/Interrupts, then this project is for you. Having the microcontroller on hand is an advantage. While I have skipped the specifics on some functionalities, the ideal candidate should be comfortable with: - Data logging and storage - Wireless communication - Sensor integration.

    $495 (Avg Bid)
    $495 平均入札額
    29 入札

    ...programming language. The key focus of this project is to create firmware for an embedded system and to handle data transfer between components effectively. Core Responsibilities: - Design and implement firmware architecture in C++ - Ensure smooth data transfer between components - Test and debug the firmware to ensure reliability and efficiency Ideal Skills and Experience: - Strong experience with C++ and embedded systems - Proven experience in firmware development - Detail-oriented with meticulous debugging skills - Good understanding of data transfer protocols would be beneficial. I want to use this ADC with the US9111 pressure sensor. I

    $166 (Avg Bid)
    $166 平均入札額
    12 入札

    Objective: Create a complete project database with information from the project lists of employees, ensuring accuracy and consistency with the existing database format. Instructions: 1. Review Existing Database and Documentation: Begin by familiarising yourself with the existing project database structure as outlined in the provided Excel document (CV ). Note the headings and notes used in the table. 2. Compare Will’s project list (WB CV (long form Jan 24).docx with entries in the database. Pay attention to project specifics such as Capability, industry, description. a. Capabilities and industries can be found within the ‘List’ sheet on the database. 3. Begin adding new projects to the database, with projects from the attached CVs fr...

    $76 (Avg Bid)
    $76 平均入札額
    89 入札

    ...intended for use with simulation and gaming. - **Skills and Experience**: - Experience with microcontrollers from all vendors, and good use of search tools. - Familiarity with analog and digital inputs from a variety of sensors. - Ability to choose options optimised for reliability, durability and cost. - **Project Outcome**: A spreadsheet document with several options, with reasons for the choices. There should be a column for cost of each significant BOM items, eg MCU, ADC, level shifters, LDO, etc, etc. The ideal candidate will have a strong background in electronics engineering and MCU related hardware development. But also a DFM common sense not to choose only the most capable components but ones which offer the best value for money. On production of a succ...

    $627 (Avg Bid)
    $627 平均入札額
    26 入札

    I am seeking an expert in FPGA and ADC circuit design. The core task involves replacing the Cyclone FPGA with an Efinix FPGA and a Linear ADC with an Analog Devices ADC on an existing schematic. I have already purchased both parts. The ideal candidate will have extensive experience with: - Efinix FPGA and Analog Devices ADC, - Altium Designer for schematic design and routing, - Gerber file generation. Not only will you need to replace the components and carry out the appropriate routing, but you will also be tasked with ensuring the functionality of the revised design through simulation. An understanding of best routing practices and design validation is crucial for this task. Deliverables include the finalised Altium Designer files and Gerber files ready for...

    $341 (Avg Bid)
    $341 平均入札額
    6 入札

    Need a PCB designed using the ATMEL SAM21D + SIM7020G and should have the proper resistance trace and connector for an external LTE antenna. It should use a usb connector to program the SAM21D in a similar way to the Arduino MKR Zero. The Atmel microcontroller will be connected to the SIM7020G in such...SIM7020G and should have the proper resistance trace and connector for an external LTE antenna. It should use a usb connector to program the SAM21D in a similar way to the Arduino MKR Zero. The Atmel microcontroller will be connected to the SIM7020G in such a way to send data over LTE of course. Additionally, there should be 3 channels to measure voltage between 6-40v using the Atmel's onboard ADC. Cost of components should be a consideration. Designs should be submitted in Ea...

    $452 (Avg Bid)
    $452 平均入札額
    30 入札

    I'm seeking an electronics expert for a specialized task: creating a control board for an Analog-to-Digital Converter (ADC) using Field-Programmable Gate Array (FPGA) technology. This board will primarily aim for data acquisition, taking advantage of a high-quality 24-bit resolution ADC to ensure accurate and reliable data retrieval. Interfacing will utilize the Serial Peripheral Interface (SPI) for its inherent advantages in speed, reliability, and simplicity. Key Skills & Experiences: - Proficient in FPGA design and programming - Familiarity with high-resolution ADCs - Experience in developing SPI interfaces - Understanding of data acquisition systems Your expertise will contribute significantly to the development of a powerful data acquisition tool. Let...

    $2280 (Avg Bid)
    $2280 平均入札額
    28 入札

    I have a pre-existing STM32 board (STM32H750VBTx) that requires a skilled freelancer to complete a time-sensitive project. The tasks include reading data from 6 ADC channels (DMA), transmitting it over UART, and implementing a basic Proportional-Integral algorithm to control the DC output. I will be present to explain the hardware setup and provide assistance throughout the project. Proficiency in STM32 programming, ADC, UART communication, and basic control algorithms is required. This is a straightforward task for an experienced STM32 developer, and immediate availability is essential. If interested, please bid on the project, and let's get started.

    $120 (Avg Bid)
    $120 平均入札額
    17 入札

    Looking for someone to develop a Python 3 / HTML two thread app for me. It'll run on a Raspberry 4 or 5. I'll do the Apache Server configuration... and such. You'll write the python app & Index.html. I'm attaching a PDF description of exactly what I'm looking for. You'll need this hardware for debugging: Serial Port adapter (to read / verify the Raspberry Pi RS232 output). SPI ADC.

    $2648 (Avg Bid)
    $2648 平均入札額
    55 入札

    I need a PCB design and parts suggestions for my project, with the following requirements: - Reliable measurement of Velostat resistance, without significant noise. - Bluetooth communication capability. - Powered by a USB cable. - Smaller size compared to the prototype. I currently have a working prototype (ESP32 + external ADC because there is too much noise on the ESP32 ADCs), but I need a smaller solution with a custom PCB.

    $47 (Avg Bid)
    $47 平均入札額
    14 入札

    Presciso de algm com experiencia para configurar uo wasender não estou conseguindo scanear o qr code para acessar o whatsapp e então importar ou adc membros a um grupo. Presciso de soluções

    $10 - $30
    $10 - $30
    0 入札

    Hi Michael Kofi A., Thanks for Akan ADC project with Cognegica Networks. Sending you offer for payments

    $12 (Avg Bid)
    地方
    $12 平均入札額
    1 入札

    Project Summary: The Client seeks to update the frame selection feature on their current artwork display page. This includes the integration of new frame images, updating the script to embed JSON data, and enhancing UI interactivity with mouseover descriptions. Artwork and Frame Data Integration The Developer will receive an Excel list containing 30 new artworks and related metadata. The Developer will be provided with images for 30 new frames, including separate images for the corners and bars which must be assembled to create a full frame representation (FRM-L-<CODEHERE>.jpg). The Developer will also receive images for 30 new frame thumbnails to be displayed in a scrollable list on the artwork page (FRM-S-<CODEHERE>.jpg).

    $107 (Avg Bid)
    $107 平均入札額
    108 入札

    I am looking for an expert freelancer who can help me with programming the nRF52840 controller. The main goal of this project is to program the controller to meet my specific requirements. Skills and experience required: - Expertise in nRF52840 programming - Knowledge of programming languages and tools commonly used with the nRF52840 controller - Ability to configure the ADC module and set up the Bluetooth functionality I am open to the freelancer's expertise and do not have any specific programming languages or tools in mind. However, familiarity with standard industry tools would be preferred.

    $332 (Avg Bid)
    $332 平均入札額
    10 入札

    Hello, I am looking an experienced freelancer who can help me to debug the error that I am facing. I am calling dialogflow API from my local but I face following e...local but I face following error. I need you to debug this error side by side with me. I am using CloudShell and Flask building the app. Welcome to apply : 403 Your application is authenticating by using local Application Default Credentials. The API requires a quota project, which is not set by default. To learn how to set your quota project, see . [reason: "SERVICE_DISABLED" domain: "" Full Stack Development Skills Flask API Integration Dialogflow API Python Chatbot

    $28 (Avg Bid)
    $28 平均入札額
    2 入札

    ...explanation and give your price. Dont waste our time if you dont have stm32 project experiences. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer and see values on our software. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# Sln file and explanation of the software. You can create new software or update ours. BUT WHEN THE JOB FINISH OUR SOFTWARE SHOULD BE WORK. 6- The project can not be separa...

    $212 (Avg Bid)
    $212 平均入札額
    21 入札
    Embedded C, C++ 終了 left

    Im looking for someone who can support me in coding. He/She must have string Embedded knowledge with C and C++ skills , Microcontroller knowledge, driver development, ADC knowledge, freeRTOS, data modeling, framework, bootloader exp.

    $1312 (Avg Bid)
    $1312 平均入札額
    19 入札

    Se NECESITA código en C para migración a PIC16F1825, sobre plataforma MPLabX Archivos de proyecto y configuración para: controlar salida PWM con 2 botones +/- en 100 pasos, lectura SPI, 2 entradas adc, 2 salida digitales

    $166 (Avg Bid)
    $166 平均入札額
    15 入札

    ...us and it seems to have errors. Project description: Iot device connected to App and server through MQTT (Already working). We are looking for a collaborator who has the following experience: -Programming in "C" language -Management and knowledge in IDF expressif -Management of free-RTOS -Knowledge of structured programming -Knowledge of ADC signals Jobs to finish: - Wifi local network configuration for Esp32 microcontroller - OTA installation (remote updates via server) - Installation of Radio Frequency module -Code check in "C" to repair it or program it again. We offer: Team of collaborators in all areas (Electronics, App. Backend) Daily support as required. Contact the professional who made the current firmware for clarification. Collaborate on a ...

    $581 (Avg Bid)
    $581 平均入札額
    24 入札

    ...if required improve the input impedance to the >1 TeraOhm range. The project requires both TeraOhm input impedance testing and PCB simulation. Specific requirements for the new impedance value: I have a specific value in mind that I would like the freelancer to achieve. >1 TeraOhm range I need a detailed report of the changes and simulations performed on the PCB. The documentation should provide a comprehensive overview of the modifications required. Ideally we don't want to modify the current PCB layout but hopefully only make changes to specific components to get as close as possible to the target input impedance. This means the same footprint components. in the end the two amplification circuits are read by ADC (3.3v chip). orp input -1500mV -> +150...

    $172 (Avg Bid)
    NDA
    $172 平均入札額
    17 入札

    ...us and it seems to have errors. Project description: Iot device connected to App and server through MQTT (Already working). We are looking for a collaborator who has the following experience: -Programming in "C" language -Management and knowledge in IDF expressif -Management of free-RTOS -Knowledge of structured programming -Knowledge of ADC signals Jobs to finish: - Wifi local network configuration for Esp32 microcontroller - OTA installation (remote updates via server) - Installation of Radio Frequency module -Code check in "C" to repair it or program it again. We offer: Team of collaborators in all areas (Electronics, App. Backend) Daily support as required. Contact the professional who made the current firmware for clarification. Collaborate on a ...

    $534 (Avg Bid)
    $534 平均入札額
    24 入札

    I am looking for a freelancer who can help me with writing Raspberry Pi code for my temperature sensor project. The ideal candidate should have experience in Python programming and be familiar with Raspberry Pi. you need to make sure that the ADC is reading it tell you if it work or not i just need output number when you finish i will convert it to a function i am openig on the pi a code to test if it reading any thing Chip ID: 0x0000 that value it is not reading any thing i will focus on other stuff if you find that you cant do it tell me Requirements: - Experience in Python programming - Familiarity with Raspberry Pi - Ability to write code to control a device using temperature sensor data Skills: - Strong knowledge of Python

    $37 (Avg Bid)
    $37 平均入札額
    12 入札

    Project Description: Can you help me with a mini spectrum analyzer using FPGA the results will be on a pc screen with GUI that the user can put markers on and change the resolution, to make a spectrum analyzer with FFT algorithm on FPGA Using UI the user can control the span a put markers. The user will be able to change parameters in a user interface. The ADC is the sampling. The FPGA is going to calculate the FFT. The all idea is to mini spectrum analyzer (the measurement device). Block chain 1. ADC for sampling 2. FPGA to calculate the FFT and sent it to the pc display

    $160 (Avg Bid)
    $160 平均入札額
    7 入札

    Project description: Design a Schematic + PCB layout in Altium Designer (license can be provided) of a module containing: 1. wide input voltage ADC (+-10V) 2. positive&negative 15V voltage supply for precise magnetic field sensor 3. Positive 15V supply for precise magnetic field sensor 4. 2x mezzanine connectors for embedded module (library will be provided to the engineer). SPI ports from ADC, etc. will have to be connected to those mezzanine connectors. 5. 5V out low noise power supply for the embedded system (300mA average output current with 1A peak), 24V in. Routed to mezzanine connector. Design requirements: 1. PCB: - max 4 layers - 1.2mm FR4 - gold plated or HASL with lead - passive component size 0402 or bigger - dimesnions as small as possible, a dxf shap...

    $671 (Avg Bid)
    緊急 NDA
    $671 平均入札額
    9 入札

    ... Please read carefully below explanation and give your price. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# Sln file and explanation of the software. You can create new software or update ours. BUT WHEN THE JOB FINISH OUR SOFTWARE SHOULD BE WORK. 6- The project can not be separated. Just STM32 code or just others can not be accepted. 7- No milestone...

    $219 (Avg Bid)
    $219 平均入札額
    9 入札
    System Engineer 終了 left

    ...communication skills and a proven track record of effectively empathizing, pacifying, and resolving issues for irate customers. Eager to leverage technical troubleshooting expertise and adaptability to new technologies to provide outstanding remote support and contribute to enhancing customer satisfaction. EXPERIENCE System Analyst, 05/2021 - Current HCL Technologies - Lucknow, India Project: SC Johnson-DWP-NORAM-EE-ADC/RDC Role/Position: Infrastructure-Delivery-L2-Analyst Answered incoming calls and logged all users' questions and issues accurately and efficiently into the ticketing system. • Successfully managed and resolved customer complaints, turning negative experiences into positive outcomes. • Demonstrated exceptional communication skills to empathiz...

    $1 - $5 / hr
    $1 - $5 / hr
    0 入札

    ...us and it seems to have errors. Project description: Iot device connected to App and server through MQTT (Already working). We are looking for a collaborator who has the following experience: -Programming in "C" language -Management and knowledge in IDF expressif -Management of free-RTOS -Knowledge of structured programming -Knowledge of ADC signals Jobs to finish: - Wifi local network configuration for Esp32 microcontroller - OTA installation (remote updates via server) - Installation of Radio Frequency module -Code check in "C" to repair it or program it again. We offer: Team of collaborators in all areas (Electronics, App. Backend) Daily support as required. Contact the professional who made the current firmware for clarification. Collaborate on a ...

    $192 (Avg Bid)
    $192 平均入札額
    16 入札

    ...Dispositivo Iot conectado a App y a servidor a través de MQTT (Ya funcionando). El firmware en su mayoría esta acabado, las tramas y ordenes ya programadas funcionan perfectamente. Buscamos a un colaborador que tenga la siguiente experiencia: -Programación en lenguaje "C" -Manejo y conocimientos en espressif IDF -Manejo de free-RTOS -Conocimiento de programación estructurada -Conocimientos en señales ADC Trabajos a terminar: - Configuración de red local Wifi para microcontrolador Esp32 - Instauración de OTA (actualizaciones en remoto a través de servidor) - Instauración de modulo de Radiofrecuencia - Quizá, terminar de incluir algunos datos en alguna trama. Ofrecemos: Equipo de colaboradores en ...

    $141 (Avg Bid)
    $141 平均入札額
    6 入札
    $441 平均入札額
    56 入札

    I am looking for an experienced freelancer to design a Peltier driver circuit for my project. The circuit should meet the following requirements: - Input Voltage for the board is 24V. - Using DAC to adjust the Peltier voltage and ADC to read the Voltage/Current of Peltier [I2C or SPI]. - All the interface with uC should be isolated. [Only schematic is required WITHOUT PCB layout] Skills and Experience: - Good knowledge and experience in circuit design and electronics. - Familiarity with Peltier driver circuits and their specifications. - Attention to detail to ensure the circuit meets the desired requirements. - Ability to provide clear documentation and instructions for the circuit design. If you have the necessary skills and experience, please submit your proposal with e...

    $36 (Avg Bid)
    $36 平均入札額
    17 入札

    I am looking for a freelancer to help me develop an i/o expansion board for the NUCLEO-H745ZI-Q Development Board. The board should have the following functionalities: NUCLEO-H745ZI-Q Development Board, need to make a i/o expansion board 10 stepper motor controlls (isolated) 2 (modbus ) connectors 1 adc (4-20 ma) 6 pc817 inputs(limit switch) 2 optical encoder connectins 24( relay connector just , bhr connectors ) 24 input power supply 4-20 ma loop transmeter temperature sensor (universal) - Experience in developing i/o expansion boards - Knowledge of the NUCLEO-H745ZI-Q Development Board - Proficiency in designing PCB layouts - Understanding of analog inputs and their implementation - Ability to work within a specified time frame

    $500 (Avg Bid)
    $500 平均入札額
    14 入札

    ...Dispositivo Iot conectado a App y a servidor a través de MQTT (Ya funcionando). El firmware en su mayoría esta acabado, las tramas y ordenes ya programadas funcionan perfectamente. Buscamos a un colaborador que tenga la siguiente experiencia: -Programación en lenguaje "C" -Manejo y conocimientos en espressif IDF -Manejo de free-RTOS -Conocimiento de programación estructurada -Conocimientos en señales ADC Trabajos a terminar: - Configuración de red local Wifi para microcontrolador Esp32 - Instauración de OTA (actualizaciones en remoto a través de servidor) - Instauración de modulo de Radiofrecuencia - Quizá, terminar de incluir algunos datos en alguna trama. Ofrecemos: Equipo de colaboradores en ...

    $161 (Avg Bid)
    $161 平均入札額
    7 入札

    looking for someone who have very good knowledge of pic 16f15385 and write assembly code in mplabx to read 8 adcs and simulate this project in mplax x .

    $28 (Avg Bid)
    $28 平均入札額
    2 入札

    ...2200 hours between replacements) and will stand by in a low-power/sleep mode, waking at 1 second intervals to communicate with the GATT client and service any commands/tasks. Top Level Functionality List --------------------------------- The corridor light button's functionalities include: - Monitor status of a button (momentary switch, SPST-NO) via digital input - Monitor device battery life via ADC input - Interface with an LED driver (PWM or I2C) to control 4 LEDs (RGBY) - Interface with an NFC reader to read NFC card ID in device proximity for a defined time interval after a button press event. - Interface with an E-Paper Display (EPD) to display patient information - Communicate via BLE as a GATT server (custom profile) with gateway (GATT client) with the following ser...

    $34 / hr (Avg Bid)
    $34 / hr 平均入札額
    24 入札

    We have a custom board with some perhiperals. We designed a FW, and verify the interface with some ADC. We need to add a couple of small functionalities (an accelerometer via SPI and a DAC). this will requires minor modifications to 2 SPI, used to interface with an external microprocessor. Test and debug is also needed

    $529 (Avg Bid)
    $529 平均入札額
    18 入札

    ...Analog-to-Digital Converter (ADC) on the Arduino platform. I already have the evaluation kit from Analog Devices as well as I am working (with success) on my existing VSCode PlatformIO project that requires the integration of this component. I am trying to use existing drivers for this device but run into too many time consuming errors. I intend to send my code to you and if you can guide me solving it, that would be great. Skills and Experience Needed: - Proficiency in C++ programming language VSCode and PlatformIO w. ESP32 - Strong knowledge of I2C communication protocol - Experience with drivers, adresses, .cpp and .h librairies etc. - Electronics engineering skills, understanding of schematics. If you have the necessary skills and experience, and are available to w...

    $19 - $39 / hr
    緊急 シール
    $19 - $39 / hr
    18 入札

    I am looking for an experienced STM32 developer to help with a small project. Specifically, I need help coding a specific function for an STM32L0 microcontroller. This is a time-sensitive project, so I need the job to be completed by a certain deadline. Experience with STM32 microcontrollers is a must, and familiarity with STM32L0, in particular, will be particularly helpful.. LCD, Usart, ADC and PWM

    $128 (Avg Bid)
    $128 平均入札額
    18 入札
    Stm32_adc_8ch 終了 left

    Stm32 adc read 8 channels 50k samples per second Usart interface

    $50 (Avg Bid)
    $50 平均入札額
    1 入札

    ...send a header value (header: one hex value and one int value.) Ideal Skills and Experience: - Proficiency in programming with STM32F103C8T6 board - Strong understanding of analog input and voltage measurement techniques - Experience in developing programs for high-speed data acquisition - Knowledge of ADC (Analog to Digital Conversion) principles and techniques - Familiarity with programming languages such as C or C++ - Ability to optimize code for efficient and accurate sampling The project involves: - Developing a program that can perform analog readings on 8 channels using the STM32F103C8T6 board - Configuring the board to accurately measure voltage inputs - Optimizing the program to achieve a sampling frequency of 50000 samples per second - Implementing any necessar...

    $40 (Avg Bid)
    $40 平均入札額
    10 入札
    OWA fix needed 終了 left

    Still using Microsoft SBS 2011 as an ADC and Exchange Server. Had this Hyper-V hosted virtual server crash, rebuilt from a backup. Exchange 2010 is working. Everything on the server is up and running except Outlook Web Access. Need OWA to work.

    $455 (Avg Bid)
    緊急 NDA
    $455 平均入札額
    18 入札

    I am looking for someone who can help me simulate a part of ADC (AD9467_ 16-Bit_200 MSPS/250 MSPS adc) circuit, specifically the AC coupling circuit. The main objective is to test the circuit's functionality by inputting different shapes of signals and observing the output(The input and the output signal need to be in txt file ). Specific Requirements: - The ability to simulate the ADC circuit using sinewave & square wave signals. - Consideration of noise as a testing parameter during the simulation. Ideal Skills and Experience: - Proficiency in simulating ADC circuits and analyzing their behavior. - Knowledge of noise analysis and mitigation techniques.

    $66 (Avg Bid)
    $66 平均入札額
    9 入札

    Hi Jamal, I would like to hire you to develop firmware for NRF52 microcontrollers! This will include ADC communication and Bluetooth integration !

    $200 (Avg Bid)
    $200 平均入札額
    1 入札