Bluetooth obex application android仕事

絞り込む

私の最近の検索
次の条件で絞り込む:
予算
to
to
to
種類
スキル
言語
    ジョブステータス
    4,354 bluetooth obex application android 仕事が見つかりました。次の価格: USD

    We are looking to rotate one of the connected 12v DC motors to 360 degree when a bluetooth messages is sent using android mobile via Arduino uno. This device should be connected with 30 to 50 motors given some number/address or id. Mobile phone should send a command to rotate one of them by specifying its id/name or address. As a end product we want

    $462 (Avg Bid)
    $462 平均入札額
    8 入札

    The project detail is here [ログインしてURLを表示]

    $1195 (Avg Bid)
    $1195 平均入札額
    18 入札

    A php script is running on a Raspberry PI 3 B+. From that script, I need to send text messages (0-30 chars) to an Android phone using BLUETOOTH connection. The phone connects to the Raspberry using predefined MAC address and passkey. Only one user can connect to the Raspberry. The app shows a popup message, user can acknowledge or delete the message

    $195 (Avg Bid)
    $195 平均入札額
    10 入札

    Bluetooth Vulnerability CVE-2018-5383 deals with the validation fault in cryptographic key pairing mechanism in Bluetooth 4.2. I need some expert who can theoratically explain and write a paper on minimum 15 exploits on the said vulnerability in detail and diagramatically and precautionary measures that must be taken to stop that vulnerability. Also

    $56 (Avg Bid)
    $56 平均入札額
    3 入札

    Exploitation of Cryptographic Bluetooth Vulnerability in CVE-2018-5383 Bluetooth Vulnerability CVE-2018-5383 deals with the validation fault in cryptographic key pairing mechanism in Bluetooth 4.2. I need some expert who can theoratically explain and write a paper (along with presentation) on minimum 15 exploits on the said vulnerability in detail

    $178 (Avg Bid)
    $178 平均入札額
    8 入札

    INDIAN DEVELOPERS ONLY! I need an expert Xamarin dev for Native iOS and Android apps to interface with custom built hardware. I will supply the hardware but you will need to assemble it, load the firmware i send you and then write the mobile apps to interface. Some experience with Arduino is preferred but not necessary. I have done a few projects

    $13 / hr (Avg Bid)
    $13 / hr 平均入札額
    12 入札

    I would like assistance in designing and building. The need is a system that works with OBD (in a automobile) and bluetooth. If you are familiar with these systems, I need you.

    $53 / hr (Avg Bid)
    $53 / hr 平均入札額
    17 入札

    ... Power Steering Entertainment AM/FM Stereo CD Player DVD System MP3 Player Portable Audio Premium Audio Safety Airbag: Driver Airbag: Passenger Antilock Brakes Bluetooth Hands-Free Fog Lights Security System Seats Bucket Seats Heated Seats Leather Interior Memory Seats Power Seats Third Row Seats Windows Power Windows Windows Defroster

    $60 (Avg Bid)
    $60 平均入札額
    9 入札

    Add the Bluetooth HID profile to existing keyboard app. Add a swipe from edge feature to display a customizable launcher. Need a freelancer who is willing to work together in developing this unique app. Developer will also get development credits in the finished product.

    $535 (Avg Bid)
    $535 平均入札額
    3 入札

    You can use the WinRT API if you like. I can work with you to test with my device on this end. Everything must be in C++ and ...UUIDs and advertising name set set (hard coded is fine). 4. The class can receive data from the connected device. Ultimately I want to use the class in a much bigger Qt application on Windows 10. Any questions, let me know.

    $106 (Avg Bid)
    $106 平均入札額
    6 入札

    We need Android developer who should have good experience of debugging Bluetooth low energy devices and can fix the connectivity issues. Source code is Available.

    $30 (Avg Bid)
    $30 平均入札額
    1 入札

    I need an application to see a list of bluetooth devices, pair up if there is not and remember the device I made the connection to. The application will load a series of data using the REST API. I have to search through the data and send the information to the server, after which I will receive new data. New data will be displayed as clickable boxes

    $523 (Avg Bid)
    $523 平均入札額
    30 入札

    I need a software dev to create a virtual com port windows data parser app. SMART Bluetooth experience mandatory

    $21 (Avg Bid)
    $21 平均入札額
    2 入札

    ...software and robotics. My project uses real-time image recognition software in an Android app to control a robot using Bluetooth. The app uses a smartphone camera as its video source, comparing the live image with a user-selected static image. Then the app uses Bluetooth to direct a robot to paint the image. As the robot paints, the app continuously compares

    $4464 (Avg Bid)
    $4464 平均入札額
    29 入札

    We had configured Odoo POS in a cloud server and we require to connect a bluetooth thermal printer for printing bills from the Odoo POS. Possibly from Browser, also we has provided an android app running Odoo in a webview where printing must also be done using app. We can provide printer SDK

    $461 (Avg Bid)
    $461 平均入札額
    10 入札

    I need a program for WINDOWS to communicate with Arduino using bluetooth, I need to connect to the Arduino, once i am connected i need to download the eeprom data to my pc and then clear the eeprom, Just a simple program with a couple of functions

    $166 (Avg Bid)
    $166 平均入札額
    19 入札

    We are a team who is developing a customizable bluetooth low energy remote control to control computers, phones, tablets, and also other devices. The remote control has an ergonomic good looking design and the software will allow a very high level of customization. We have started developing software, but decided to start again with a more advanced

    $1427 (Avg Bid)
    $1427 平均入札額
    25 入札

    I have a xamarin android app I need to print with Bluetooth printer so I need to add the code for that part

    $140 (Avg Bid)
    $140 平均入札額
    6 入札

    ...academic requirement. We would like two android Bluetooth Low energy (BLE) applications in such a way that one master device will act as Transmitter (with transmitter app) and all other devices having client application will act as receivers. We need to send data between transmitter and Receiver(s) using Bluetooth low energy (BLE). Example: There are

    $191 (Avg Bid)
    $191 平均入札額
    15 入札

    ...for communication trial purpose only. Pls have a look on attached material. I need some one that have experience with MQTT connections, MySQL connection, JSON handling, Bluetooth File Upload and Receival. I need the layout like the PPT file. ** I need this job to be developed in 1 week, but slides 1,3 and 4 I need ready in 2 days to validate it first

    $627 (Avg Bid)
    $627 平均入札額
    25 入札

    ...handling, Bluetooth File Upload and Receival. I need the layout like the PPT file. ** I need this to be developed in 1 day once my hardware developer is in a hurry to try the communication, so pls don't apply if you don't have experience once you will not have time to research ** I will need the app to be developed in Ionic 4 (For IOS and Android) and

    $205 (Avg Bid)
    $205 平均入札額
    6 入札

    We are looking for an android developer who can develop an app (loyalty membership) to connect an android device to a NFC reader device (ACS1311U-N2) via Bluetooth/USB. integrate APIs to Issue card, Read the card, validate and perform reward and redeem points.

    $282 (Avg Bid)
    $282 平均入札額
    16 入札

    ...AT 80 AUD. Any bid over this limit is ignored. - You must have a previous experience with Bluetooth on Android at low level to be able to complete this task so please don't bid if you have no experience with Low Energy BLE. And about the task.. I need an android app that utilises mobile BLE at low level (GATT, GAP). Required functions: 0- Source code

    $150 (Avg Bid)
    $150 平均入札額
    9 入札

    ...standing option. A 42-inch TV on a pole that can't be turned away from the bed. No good backrest/bed wedge for the bed to function as a workstation. "Sound system" is a set of bluetooth noise-cancelling headphones that clip sound way too often. Possible solutions: Redesign holistically around a surround sound system. Prefer to use TV as computer display

    $5 / hr (Avg Bid)
    $5 / hr 平均入札額
    17 入札

    ...experienced React Native developer who has previous experience writing apps to communicate with Bluetooth devices. We need to develop a mobile app written in React Native to deliver the following 2 functionalities: 1- Collects data from beacons (Bluetooth): We will provide the APIs that can be used for mobile and device communications (these APIs are

    $412 (Avg Bid)
    $412 平均入札額
    9 入札

    ...experienced React Native developer who has previous experience writing apps to communicate with Bluetooth devices. We need to develop a mobile app written in React Native to deliver the following 2 functionalities: 1- Collects data from beacons (Bluetooth): We will provide the APIs that can be used for mobile and device communications (these APIs are

    $185 (Avg Bid)
    $185 平均入札額
    14 入札

    You can use the WinRT API if you like. I can work with you to test with my device on this end. Everything must be in C++ and will be used in an existing Qt project. The project will be considered complete when; 1. You have provided a C++ class that compiles using Qt 5.12 & VS 2017 on Windows 10. 2. The class advertises a service. 3. The class is able to have the UUIDs and advertising name set...

    $107 (Avg Bid)
    $107 平均入札額
    7 入札

    In order to make multiple arduinos - 6 or 7 - communicate simoultaneously sending data to one computer

    $84 (Avg Bid)
    $84 平均入札額
    11 入札

    I need simple App this connect with device with bluetooth, emulating serial port UART BLE, at 9600,8,1,n put a indicator red is disconected green is connected. Put a text input (from phone Android) Put button to send Put a text view for ouput (from device) In java Budget fixed $ 50 USD Time to delivery 2 days I need the source code

    $50 (Avg Bid)
    $50 平均入札額
    9 入札

    My company is building a small, custom bluetooth speaker, intended for kids, that has functionality both with and without an accompanying app. The two most distinct features are the speaker's shape, and ten custom ports for buttons/light extensions. I am looking for a partner FOR THE DEVICE ONLY (not the app) who has both the electrical and industrial

    $1347 (Avg Bid)
    $1347 平均入札額
    33 入札

    ...COST TO INCLUDE ALL OF THIS INCLUDING FAB, ASSEMBLY, BOM! Use inexpensive microprocessor from Rockchip, Allwinner [ログインしてURLを表示] should be Android. Decode 4K a/v stream, record from microphone input. Download and run Android apps. No AI, neural network or image recognition required. Be able to drive dual touch screens (1080P each). Use existing SBC reference

    $2674 (Avg Bid)
    $2674 平均入札額
    19 入札

    The project is precisely defined in the attached document, version 3.0, and it is not anticipated that there will be a need to clarify any technical aspect. This is a fixed priced project and must be delivered on time and on bid budget, according to the Freelancer's initial bid only. It is assumed that the Freelancer has read the attached project definition before bidding, therefore all bid...

    $463 (Avg Bid)
    $463 平均入札額
    4 入札

    This Project is to create a system to allow a mobile device to stream music to multiple Bluetooth speakers/headphones simultaneously. It has two main deliverables: 1. A hardware device which includes the Bluetooth receiver and transmitter(s). The successful bidder will need to identify a suitable set of standard components and (if necessary) provide

    $2716 (Avg Bid)
    $2716 平均入札額
    21 入札

    ... He will then connect with Bluetooth with the Karoake app and sing the song. The app will have controls and features similar to meragana. pitch, echo , volume, tempo Scale Live display of notes Recording Social media sharing etc). User can buy the mic of the client and connect his handset through bluetooth with the app and use the same

    $2018 (Avg Bid)
    $2018 平均入札額
    14 入札

    ...He will then connect with Bluetooth with the Karoake app and sing the song. The app will have controls and features similar to meragana. pitch, echo , volume, tempo Scale Live display of notes Recording Social media sharing etc). User can buy the mic of the client and connect his handset through bluetooth with the app and use the same

    $4295 (Avg Bid)
    $4295 平均入札額
    73 入札

    I need a really simple piece of connecting AWS to a Cypress PSoC-6 evaluation kit using BlueTooth. [ログインしてURLを表示] [ログインしてURLを表示]

    $893 (Avg Bid)
    $893 平均入札額
    15 入札

    Looking for someone to make small application to change the Bluetooth name on devices that have Nordic chipset.

    $58 (Avg Bid)
    $58 平均入札額
    7 入札

    Hello all writers, We need long-term article writer to help updating our blog on the website. Topics about wireless earbuds/Bluetooth headphones/Bluetooth speaker,[ログインしてURLを表示] we need 3 to 5 articles per week and our budget is $5-8 per blog. [ログインしてURLを表示] [ログインしてURLを表示]

    $49 (Avg Bid)
    $49 平均入札額
    30 入札

    i need an esp 8266/esp 32 project esp will connect to wifi get 3 links to mp3 /wave files on internet +user and password for each play them via bluetooth to external bluetooth speaker or headphones in loop

    $566 (Avg Bid)
    $566 平均入札額
    5 入札

    Developer or Electronic expert for build an app that will connect to a device trought bluetooth .

    $34 (Avg Bid)
    $34 平均入札額
    11 入札

    My company is building a small, custom bluetooth speaker, intended for kids, that has functionality both with and without an accompanying app. The two most distinct features are the speaker's shape, and ten custom ports for buttons/light extensions. I am looking for a partner FOR THE DEVICE ONLY (not the app) who has both the electrical and industrial

    $5568 (Avg Bid)
    $5568 平均入札額
    16 入札
    $316 平均入札額
    39 入札

    ...Xamarin Form implementation. Top Level Requirements 1) The application will need permissions to scan *both* Bluetooth/WiFi and *also be able to access the camera* get a photo for a QR code. 2) The application should implement a web-view that should be indistinguishable from the application 3) The web-view should contain parameters (QR code value, hardware

    $647 (Avg Bid)
    $647 平均入札額
    40 入札

    I need an app that will send signal via bluetooth to turn on motor when alarm on phone goes off

    $572 (Avg Bid)
    $572 平均入札額
    46 入札

    We need to connect our android app via bluetooth with some cheap models of thermal receipt printers. You can offer models of thermal receipt printers with which you have bean dealing. We are open to consider different devices. After connecting to printer we need to put button "Print" on our activity(page) with order details. On pushing this button

    $163 (Avg Bid)
    $163 平均入札額
    14 入札