House extension concepts

  • ステータス: Closed
  • 賞金: $250
  • 受け取ったエントリー: 23
  • 優勝者: Nica3D

コンテスト概要

Hi, I'm looking for a residential architect/building designer to help me with some floor plan and roof concepts for an extension on my house.

Some basics info about the property, the original house is a symmetrical bluestone cottage (built around 1900), with a brick extension built probably in the 70' s. Intent being to demolish and clear everything on the block except the original stone house, perform some restoration work on that and then extend the house and re-landscape.

Some relevant key info:
- Extension to contain:
>Large open plan kitchen, dining, and living area
>Large main bedroom with walk in/through robe and ensuite
>Main bathroom
>Laundry
>Small study area (not critical)
- Extension should be approx 130-160 square metres
- Site reasonably flat, approximately 200mm fall from both south to north and east to west (rear)
- Minimum distance between building and property boundary 900mm

I've attached a rough site plan and drawing of the existing building floorplan, along with an initial concept that I've come up with as an example. Also attached are some photos of the front of the house, and additionally a revit file I've been working on (to the best of my limited revit skills)

What I'm looking for is not detailed drawing but simply some different floorplan and roof style ideas. For the floorplans, no need for detail or even windows, simply walls and room labels would be sufficient, with accompanying roof style ideas with sketches/very basic overall building mass elevations.

推奨スキル

このコンテストのトップエントリー

エントリーをもっと表示

公開説明ボード

  • atonu
    atonu
    • 2週間前

    please check entry #33

    • 2週間前
  • gaur1973
    gaur1973
    • 2週間前

    please check entry #27 .thank

    • 2週間前
  • atonu
    atonu
    • 2週間前

    working!! please wait till end..

    • 2週間前
  • rexperlado75
    rexperlado75
    • 2週間前

    Kindly check my Final entries (#29)

    • 2週間前
  • Antonaq
    Antonaq
    • 3週間前

    Hi, I'm not sure of the heights in the Revit model - there is a level mark at 4.00m, but nothing is attatched to it. The correct height is crucial for the new roof design - could you tell me height of the eaves of the existing roof, so I know how far the new roof can go up? Thank you!

    • 3週間前
  • ArchamDesign
    ArchamDesign
    • 3週間前

    Please check my entry #7 . Thank you.

    • 3週間前
  • JMILDREN
    コンテスト所有者
    • 4週間前

    need to keep the existing roof at the front as is and have a separate roof for the extension

    • 4週間前
  • Nica3D
    Nica3D
    • 4週間前

    Please check my entry # 2.

    • 4週間前
    1. JMILDREN
      コンテスト所有者
      • 4週間前

      Hi Orlando, thanks for your entry, i like it very much. Did you have any ideas for the roof shape of the extension?

      • 4週間前
    2. Nica3D
      Nica3D
      • 4週間前

      I'll work on that with the roof shape plan to keep the existing one in the front of the house or plan a new roof for the whole house.

      • 4週間前
  • lorenzoarchitek
    lorenzoarchitek
    • 1ヶ月前

    can we have a dxf file from .rvt file? you must save the revit file and change the extension from .rvt to .dxf. thank you

    • 1ヶ月前
    1. JMILDREN
      コンテスト所有者
      • 4週間前

      Hi, no problem I've now uploaded some DXF files.

      • 4週間前
  • wycccka
    wycccka
    • 1ヶ月前

    #guaranteed

    • 1ヶ月前
  • ahmadaffan
    ahmadaffan
    • 1ヶ月前

    #guaranteed

    • 1ヶ月前

コメントをもっと見る

コンテストの開始方法

  • あなたのコンテストを投稿

    あなたのコンテストを投稿 速くて簡単に

  • たくさんのエントリーを集めましょう

    たくさんのエントリーを集めましょう 世界中から

  • ベストエントリーをアワード

    ベストエントリーをアワード ファイルをダウンロード - 簡単!

コンテストを今すぐ投稿 または本日参加!